Jump to content

Joining the Rack gang.


Robert

Recommended Posts

So im finally fully moved in to my brand new apartment and finally got internet (thankfully) :triumphant:

Ive got a spare room in the apartment which im planning on starting up ONE rack and the rest will follow as nature takes its course.

Ill be making the stand from scratch as ill need a custom size. Ill be running 3 tanks drilled in the back or base.. still undecided if someone can throw me some pros and cons running into a reservoir tank like brother marcus' rack then back up the top using a canister hooked up to UV and a chiller. Sponge filter in each tank for extra circulation.

Each tank will measure 800 x 600 x 350

So two questions:

- Drill the base or the back?

- Divide in half or quarters?

Link to comment
Share on other sites

I drilled the back on mine so there will be less stuff in the tank but that way pretty much dictates the water level with the outflow. If you're going to have a hole for the return then it's definitely in the back. Sumps are great cause the increase the system volume which help make it more stable, make water changes easier, are more adaptable to your specific needs but they can be noisy. Are thirds an option? :encouragement:

Link to comment
Share on other sites

Drilling from the bottom glass means you can put the rack closer against the wall but there will be a pipe inside your tank . Drilling on the back can avoid the pipe inside your tank but you can't put the rack against the wall because of the plumming however you can adjust the water level if you put another pipe inside the elbow.did you see my plumming on my tank?

Link to comment
Share on other sites

When I constructed my rack, I deliberately made it using a 90x90mm Timber Post, so that the tank can be drilled from the side, and all the pipework can be ran between these post. Win Win .... no unsightly pipework from the bottom, and the rack can be pushed hard against the wall.

DAC47529-21DA-4D55-9D5F-CFBD8B5C8FE7-6696-0000078FBA38CC1D.jpg

Link to comment
Share on other sites

Absolutely genius marcus. Great idea! forgot to less out the stand in my tank dimensions so ill be loosing a few cm length. Might just simplify it and make them 600 x 600 x 350 divided in half so that i can have an eheim 2215 on each shelf pumping up to cascade down.

Link to comment
Share on other sites

My tanks were also build with a mirrored rear panel. Helps with the viewing and finding of hiding shrimpies....

3D537D6B-3495-46CE-9CBE-4CCE8C73ABD6-17499-0000114D07055E56.jpg

Link to comment
Share on other sites

What a great idea Bluebolts :encouragement:

You can admire yourself and your shrimps at the same time :D

Link to comment
Share on other sites

The mirror is an excellent idea, I went with the standard black paint myself, otherwise I'd want mirrors on all sides. Real Shrimp Porn!

Link to comment
Share on other sites

itll be too hard to see the mirror backing on a 2ft deep tank so ill keep it basic and go with black.

Link to comment
Share on other sites

  • HOF Member
What a great idea Bluebolts :encouragement:

You can admire yourself and your shrimps at the same time :D

Good one Torface:encouragement:

Link to comment
Share on other sites

Lol, yes but i do genuinely think it looks nice :)

Link to comment
Share on other sites

  • HOF Member

When I first started keeping fish all my tanks had mirrored backs and it was a great way to see the back of the tank. Don't see many tanks with mirrors anymore.

Link to comment
Share on other sites

C'mon, stop picking on me. I only glance at my own reflection every other time.....:smiley_simmons:

Link to comment
Share on other sites

Have my first quote from MS Aquarium.

600x600x350 divided $80 each with lids. $20 per hole drilled. Each tank needs a hole drilled in the divider and the side which equals $120 per tank or i can drill the side one for free which drops the price $100 each or i can have no divider and itll be $65 a tank with lids. So many options.

Link to comment
Share on other sites

Have my first quote from MS Aquarium.

600x600x350 divided $80 each with lids. $20 per hole drilled. Each tank needs a hole drilled in the divider and the side which equals $120 per tank or i can drill the side one for free which drops the price $100 each or i can have no divider and itll be $65 a tank with lids. So many options.

Good price for for a 2x2ft...you talking about the one in Moorebank?

Link to comment
Share on other sites

Have my first quote from MS Aquarium.

600x600x350 divided $80 each with lids. $20 per hole drilled. Each tank needs a hole drilled in the divider and the side which equals $120 per tank or i can drill the side one for free which drops the price $100 each or i can have no divider and itll be $65 a tank with lids. So many options.

Just do it..

Link to comment
Share on other sites

does that include a good silicone job or their standard silicone work ?

Link to comment
Share on other sites

That's pretty cheap compared to what I paid for my 4 ft. Make sure you see a sample of workmanship before you buy. Some of the shops sells cheap tanks but the silicon is abit messy.

Link to comment
Share on other sites

Ive got a tank made by them but i paid extra for a cleanish silicon job. If i get them to make it ill make sure its not a complete mess. Waiting for billy from aquaristics to reply with my quote.

Link to comment
Share on other sites

I got my tank made from the same guys that do aquaristic. It's expensive but the silicon is spot on, near perfect. He also uses black silicon.

Link to comment
Share on other sites

Try abyss aquarium aswell. They are making my 60x40x40, black background, 2 removable acrylic mesh dividers for $160.

They will charge $48 for a 60x40x40 on its own. $10 to drill a hole.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Join Our Community!

    Register today, ask questions and share your shrimp and fish tank experiences with us!

  • Must Read SKF Articles

  • Posts

    • ngoomie
      Alright, I've done a bit more research on gentian violet's cancer-causing potential but I haven't yet done research on malachite green's to compare. But from reading the California propositon 65 document about GV (North Americans incl. some Canadians will recognize this as the law that causes some products they buy to be labelled with "known to the state of California to cause cancer", including the exact product I bought) it seems that the risk of cancer is related to internal use, either injection or ingestion. Speaking of ingestion, I think GV bans mainly relate to its use in treating fish/shrimp/etc. which are intended for human consumption, because of the above. And in countries where GV isn't banned for this purpose, it does seem to get used on various species of shrimp without causing any issue for the shrimp themselves (at least enough so for shrimp farming purposes). See the following: In February, the FDA Began Rejecting Imported Shrimp for Gentian Violet and Chloramphenicol (2022 article by Southern Shrimp Alliance) FDA Starts New Calendar Year by Refusing Antibiotic-Contaminated Shrimp from Three BAP-Certified Indian Processors and Adding a BAP-Certified Vietnamese Processor to Import Alert (2024 article by Southern Shrimp Alliance) Southern Shrimp Alliance and some other organizations have tons of other articles in this vein, but I'd be here for a while and would end up writing an absolutely massive post if I were to link every instance I found of articles mentioning shrimp shipments with gentian violet and/or leucogentian violet registering as contaminants. That being said, I know shrimp farmed for consumption and dwarf shrimp are often somewhat distantly related (in fact, the one time a shrimp's species name is listed that I can see, it's the prawn sp. Macrobrachium rosenbergii, who at best occupies the same infraorder as Neocaridina davidi but nothing nearer), but this at least gives a slightly better way of guessing whether it will be safe for aquarium dwarf shrimp or not than my bladder snail anecdote from the OP.
    • sdlTBfanUK
      I would hazard a guess that perhaps those eggs were unfertilized and thereby unviable? Did the eggs change colour, usually yellow to grey as the yolks used up, or any eyes in the eggs. Is your water ok, using RO remineralised and the parameters in range, as I have heard others say that if the water isn't good it can 'force' a molt? How is it going overall, do you have a good size colony in the tank, you may have reached 'maximum occupancy' as a tank can only support so many occupants.
    • beanbag
      Hello folks,  The current problem I am having is that my Taiwan bee shrimp are molting before all their eggs have hatched.  Often the shrimp keep the eggs for 40+ days.  During that time, they lose about half or so, either due to dropping or duds or whatever.  Shortly before molting they look to have about a dozen left, and then they molt with about half a dozen eggs still on the shell.  Then the other shirmp will come and eat the shell.  These last few times, I have been getting around 0-3 surviving babies per batch.  I figure I can make the eggs hatch faster by raising the water temperature more (currently around 68F, which is already a few degrees higher than I used to keep it) or make the shrimp grow slower by feeding them less (protein).  Currently I feed Shrimp King complete every other day, and also a small dab of Shrimp Fit alternating days.  Maybe I can start alternating with more vegetable food like mulberry?  or just decrease the amount of food?
    • ngoomie
      Yeah, cancer risk was a thing I'd seen mentioned a lot when looking into gentian violet briefly. I kinda just figured it might only be as bad as the cancer risk of malachite green as well, but maybe I should look into it more. I've been doing a pretty good job of not getting it on my skin and also avoiding dunking my unprotected hands into the tank water while treating my fish at least, though. Maybe I'll just not use it once I'm done this course of medication anyways, because I know a store I can sometimes get to that's pretty distant carries both malachite green and methylene blue, and in pretty large quantities.
    • jayc
      Can't help you with Gentian Violet, sorry. It is banned in Australia violet for potential toxicity, and even possible cancer risks. I thought it was banned in Canada as well. At least, you now know why there isn't much info on gentian violet medication and it's use. But keep an eye on the snails after a week. If it affects the snails, it might not kill them immediately. So keep checking for up to a week. Much safer options out there. No point risking your own life over unsafe products.
×
×
  • Create New...