Search the Community
Showing results for tags 'attempt'.
I have been a long time lurker on this forum and have learnt a lot from past and present members who have contributed to this forum. Thank you. This is my first 'real' post and I hope this would help anyone who might be considering building a rack themselves. As requested by @Disciple, hope this helps you too. Just a bit of background on my experience. My only previous build attempt was for a stand and sump for a 4x2x2. It was my first build dabbling with staining wood and using silicon for sump baffles, etc. As you can see from the photos below, they are pretty amateurish but I am happy for how it turned out as a first attempt. Next step is to fit some doors to it. The stand was built following this video by King of DIY. https://www.youtube.com/watch?v=jN4Y9AYuwcQ Anyway, this gives you an idea of the level of experience I have before I embark on my ambitious attempt to build a rack. Below are some photos of my 4x2x2, sump and stand build, and some of its inhabitants. Sorry they are not shrimp related and not of great quality taken using my phone. Stand and sump Filled up and planted. Display tank front view. Display tank side view. With background in place and tank inhabitants added consisting of altum flora discus, german blue rams, panda corydoras, cardinal tetras, otocinclus, red cherry shrimps, darwin algae shrimps and darwin red nose shrimps. Altum flora discus. Panda corydoras. German blue rams with their fry. I have browsed many build threads including some from here and have built on my ideas collectively from different sources. The specific post from @BlueBolts here: http://shrimpkeepersforum.com/forum/topic/1415-breeding-rack-no2/ has inspired me greatly and I would like to acknowledge that. I followed the DIY rack build as outlined here: http://shrimpkeepersforum.com/forum/topic/7063-diy-rack-for-under-50-in-under-2hrs/ The plan, materials, and costs This rack will be located in the lounge room so it has to be 'display-ish' quality and light from it must not interfere with the TV or be too blinding to people sitting around the lounge room. Also, no unsightly hoses/pipes are to be seen. I managed to convince the Minister for Home Affairs that a canister filter and chiller by definition, is not categorised as hoses or pipes, and would be in no way unsightly. The LED display from the chiller would provide subtle mood lighting, and the gentle humming of the filter and soft soothe whirling of the chiller fan would be therapeutic for lounge surfers, and would also greatly enhance movie watching experience with enriched sound depth and effects. Hence I received approval to have a canister filter and chiller located next to the rack. I used 5 x 5.4m long 90x45mm MGP10 untreated structural pine bought and cut to size from Masters for $83.75. I find Masters generally sells timber cheaper than Bunnings. Since I have both of them close to where I live, I selectively buy what I need from where it is cheaper. The frame is held together by 10-8 x 75mm zinc plated countersunk screws. I bought a box of 250 screws from Bunnings for $27.50. The rack measures 1390 x 420 x 2200 mm (L x W x H). The plan is to hold 2 x 2'x15"x15" tanks on the top and middle tier each, and a 4'x15"x15" hospital/quarantine/grow out/sump tank on the bottom tier. Each tank would be insulated by 20mm foam around the sides, back and base as I plan to run both tropical (28-30 degrees C) and chilled (22-24 degrees C) tanks on this rack. Plumbing for air and sump would be hidden within the frame. Please disregard the mess in the background. Still sorting out stuff in the garage after the move. From this: To this: