Jump to content

Need More Room - It's Rack Time!


JohnH

Recommended Posts

It's amazing how it works? I have a big bottle in my aquarium and often just sit and watch the media working. I'm pretty sure it keeps the nitrates down.

From my understanding, K1 doesn't reduce nitrates directly. K1 media only helps to break down ammonia to nitrates. Nitrates don't like oxygen, so using slow water flow in a denitrator helps reduce oxygen levels, and denitrifying bacteria grow. Plants absorption and WC are other nitrate reducing lternatives.

Link to comment
Share on other sites

  • Replies 138
  • Created
  • Last Reply

Top Posters In This Topic

  • JohnH

    54

  • Squiggle

    25

  • ineke

    15

  • BlueBolts

    9

That's correct BB it doesn't reduce nitrates, the unique thing about K1 is that it is self cleaning. As the pieces bump together they knock off some of the bacteria allowing space for new bacteria to grow :encouragement:

Link to comment
Share on other sites

  • 4 weeks later...
  • 3 weeks later...

Thanks, I'm in the process of upgrading the substrate to Benbachi soil and replacing all the java moss with some wonderful native mosses.

Link to comment
Share on other sites

  • 1 month later...

Really like the setup I am truly intrigued by the topup system where to get the float switch from. What kind of pump is in the barrel and how itnis all connected to the barrel itself. Any instructionals or help is appreciated :-)

Link to comment
Share on other sites

The float switch came with the sump which I got second hand. They are available from a number of places, Jaycar being one http://www.jaycar.com.au/productView.asp?ID=SF0920

The pump is just a small aquaone power head pump that I had laying around. It doesn't have to have a high volume, just as long as it has enough lift to go from the bottom of the water container to the top of the sump. I just have a hose going from the pump inside the barrel that I have tied so it sits over top of the sump and feeds water into the K1 media section.

Link to comment
Share on other sites

Hey mate,

Great work with the rack so far!

Can I ask what lights you are using?

Link to comment
Share on other sites

  • 1 month later...

In an effort to keep my MTS confined within my rack, I'm looking at dividing the 4 tanks I have into 2 or 3 sections each.

If I go 3 sections, each section will be around 20cm D x 45cm W x 35cm H, giving me 12 individual sections in the rack

27b61e53-9fff-46c5-9da1-57254916af5f_zpsf3094047.jpg

If I go two sections, each section will be around 30cm D x 45cm W x 35cm H, giving me 8 individual sections in the rack.

b517e79f-a5c3-420d-b8c0-806fc074a9e0_zps1db98661.jpg

Is 20cm D x 45cm W x 35cm H enough space?

Link to comment
Share on other sites

Personally I wouldn't, you're sitting around 25 - 27L if you're lucky taking into account substrate and depth of water, potentially less. For shrimps I love volumes of water, it keeps not only the temperature more stable but water parameters as well, how are you going to deal with say an ammonia spike? Or water hitting 30c? And small volumes of water can get hot pretty fast

Link to comment
Share on other sites

I should have mentioned that the dividers will have mesh covered holes. Water from the sump would go in one end of each tank, flow through the dividers, exit out the other end back to the sump.

Link to comment
Share on other sites

Hey John, I have some glass I got cut for another project a while back, still wrapped in paper from the glazier. Paid $120 you can have them for free if you can use them.

Link to comment
Share on other sites

What size are they Serkan? My last attempt at glass cutting was a huge fail so I'm not keen to re-visit. Plus I need to get holes drilled, so I may need to go to the glazier anyways. :crushed: But thanks for the offer anyways. :cheerful:

Link to comment
Share on other sites

Hi John,

I have:

4 sheets of 344mm x 380mm

3 sheets of 342mm x 380mm

4 sheets of 286mm x 380mm

4 sheets of 302mm x 340 mm

Any of these any use to you?

Link to comment
Share on other sites

I got two more tanks done this weekend, so only one left to do.

The top tank has some playground sand as this one will be housing my Choc/Black Cherry shrimp. I'm just giving the bottom tank another day or so for the silicone to cure before I add some Benibachi soil and fill 'er up.

P9220773_zpsc49d7185.jpg

Link to comment
Share on other sites

  • HOF Member

Looks great John. I think I might buy some for my two blue projects- blue velvet and blue from Chocolate as I'm having trouble seeing them against the dark substrate. Thanks for the idea.:)

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Join Our Community!

    Register today, ask questions and share your shrimp and fish tank experiences with us!

  • Must Read SKF Articles

  • Posts

    • sdlTBfanUK
      I would hazard a guess that perhaps those eggs were unfertilized and thereby unviable? Did the eggs change colour, usually yellow to grey as the yolks used up, or any eyes in the eggs. Is your water ok, using RO remineralised and the parameters in range, as I have heard others say that if the water isn't good it can 'force' a molt? How is it going overall, do you have a good size colony in the tank, you may have reached 'maximum occupancy' as a tank can only support so many occupants.
    • beanbag
      Hello folks,  The current problem I am having is that my Taiwan bee shrimp are molting before all their eggs have hatched.  Often the shrimp keep the eggs for 40+ days.  During that time, they lose about half or so, either due to dropping or duds or whatever.  Shortly before molting they look to have about a dozen left, and then they molt with about half a dozen eggs still on the shell.  Then the other shirmp will come and eat the shell.  These last few times, I have been getting around 0-3 surviving babies per batch.  I figure I can make the eggs hatch faster by raising the water temperature more (currently around 68F, which is already a few degrees higher than I used to keep it) or make the shrimp grow slower by feeding them less (protein).  Currently I feed Shrimp King complete every other day, and also a small dab of Shrimp Fit alternating days.  Maybe I can start alternating with more vegetable food like mulberry?  or just decrease the amount of food?
    • ngoomie
      Yeah, cancer risk was a thing I'd seen mentioned a lot when looking into gentian violet briefly. I kinda just figured it might only be as bad as the cancer risk of malachite green as well, but maybe I should look into it more. I've been doing a pretty good job of not getting it on my skin and also avoiding dunking my unprotected hands into the tank water while treating my fish at least, though. Maybe I'll just not use it once I'm done this course of medication anyways, because I know a store I can sometimes get to that's pretty distant carries both malachite green and methylene blue, and in pretty large quantities.
    • jayc
      Can't help you with Gentian Violet, sorry. It is banned in Australia violet for potential toxicity, and even possible cancer risks. I thought it was banned in Canada as well. At least, you now know why there isn't much info on gentian violet medication and it's use. But keep an eye on the snails after a week. If it affects the snails, it might not kill them immediately. So keep checking for up to a week. Much safer options out there. No point risking your own life over unsafe products.
    • ngoomie
      Hello! I have a tank that currently does not contain shrimp, but does contain neon tetras which I am currently treating for Ich, as well as some bladder snails. Shrimp will be a later addition, likely cherry shrimp but I'm still doing research just to be sure. Initially I'd intended to buy some sort of Ich-fighting product that contains malachite green after doing a decent bit of research on it, most of which indicated that it should be shrimp-safe so I'd be good if I ever needed to use it again once shrimp were actually introduced (though I should note I'm aware shrimp can't get Ich, I'm more wondering in case the tetras could get Ich again, or something else that responds to similar medication). I ended up not being able to find any MG-containing products without either having to travel quite far or wait multiple days for delivery (which I was worried could lead the Ich to be fatal), and ended up picking up 'Top Fin Ick Remedy', a product that contains gentian violet which is a triarylmethane dye like malachite green. The bottle has two slightly differently worded warnings about its use with invertebrates ("not recommended for" and "not safe for" respectively), but when I'd been researching malachite green, I'd also heard of products that contain MG but not any other ingredients that would be harmful to inverts still being branded with warnings that they could be harmful, just as a "just-in-case" since the manufacturer didn't test it on any inverts, and I'm wondering if maybe it could be a similar situation here. I'm having a very very hard time finding information about gentian violet's use in fishkeeping at all though, it seems currently extremely uncommon. What I will say though is that I'm on day 2 of treating my tetras with it, and the bladder snails seem just fine -- in fact today I noticed what looked to be a bladder snail that appeared to be newly hatched (because of its size) that I hadn't seen before that was zipping around the tank without issue. But obviously, shrimp are not snails, and bladder snails are also notoriously hardy little guys, so what I'm seeing right now could easily be totally inapplicable to cherry shrimp. It might even be inapplicable to other species of snails, for all I know. Has anyone else here ever used anything that contains gentian violet in a tank that actually does contain shrimp? Were they okay, or should I make sure to not use it once shrimp are added?
×
×
  • Create New...