Skip to content
View in the app

A better way to browse. Learn more.

Shrimp Keepers Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Pandoras Rack

Featured Replies

Time to start a journal of my new rack.

Rack: Custom made timber rack. 90x35mm pine and plywood construction. Painted in matt black.

Tanks: 12 x 30cm cubes (3x2fts divided, 2x3fts divided)

Lighting: 90cm works LEDs

Substrate:benibachi normal

Filtration: 3ft sump with k1 chamber and filter mat chamber

Heating: 2x150w eheim

Cooling: Hailea hc300a

The base rack before painting

imagejpg1-10.jpg

Plywood shelves installed and rack in final position

imagejpg2-8.jpg

Rack bolted to floor and strapped to wall as its only 300mms deep to prevent falling

imagejpg7-1.jpg

imagejpg9-1.jpg

Foam mat from Bunnings for under tanks

imagejpg17.jpg

First set of tanks and sump after being made

imagejpg35.jpg

Tanks sprayed black

imagejpg2-6.jpg

First sump build....spot the mistake

imagejpg7-2.jpg

Top row of tanks drilled and in place

imagejpg1-7.jpg

All tanks drilled and in place sump no2 in place

imagejpg12-2.jpg

That's it for now another update tomorrow.

Edited by inverted

Looking good! looking forward for the updates :D

I have to admit, I do enjoy shrimp, but some people go to great measures to keep and breed shrimp, it's actually quite impressive and interesting, looks like it's going to be a fair set up there.

Wow dude, looks like it's going to be a stunner, well done! :thumbsu:

stalker-620x349.jpginteresting....

 

looks like a sick rack man!

^ is that actual footage of you sitting outside squiggles shrimp room buck?

haha  :ninja:  

That's who that was! :lolu:

Looks cool, & yes I made the same mistake building my sump!!!,

  • HOF Member

Wow that will be an awesome setup! Looks great.

Looks cool, & yes I made the same mistake building my sump!!!,

OOps!!! How annoying!!

 

 

This is going to be a brilliant setup! Looking forward to the updates!!

  • Author

Okay so this is the latest update on the rack build.

Inflow lines are 25 and 20 mm pvc with individual ball valves to each section. Outflow lines are 25 mm m&fs to 25 mm poly to 32mm and 40mm pvc back to sump

imagejpg1-11.jpg

imagejpg1-12.jpg

Inside the tanks spray bars are made with 15mm swing arm(irrigation) it allows them to be moved around to change flow direction. 20mm stainless steel strainers to save shrimps ending up in sump

imagejpg15.jpg

Sump has k1 media in first section,filter matt and wool little bit of matrix in second compartment, twin 150 watt eheim heater and the pump is a 10000 lph pond pump. Gives 300+ lph in each compartment 10 x Tanks size per hour

imagejpg7-3.jpg

imagejpg8-3.jpg

imagejpg9-3.jpg

Edited by inverted

  • Author

Installed a sun sun 55 watt uv steriliser..... Cheap will see how it goes.

imagejpg17-1.jpg

Bottom row has benibachi soil.... I really like the look of this substrate it just has a nice look about it

Top row has Mr Aqua . Only because I had it laying around. Feel like it might be a mistake to use it as to date it's only lasted 12 months.

imagejpg11-3.jpg

Next step is the sponge filters and airlines( on order). And lighting also on order.

In the mean time I have already started cycling.

Man im so jelly my rack is still so far from getting wet!

Looks like a sweet system! Im sure the shrimp are going to love it!

Edited by buck

Looking pretty stunning! Great plumbing job!!

you have done a very good job, congrat's, however i would suggest changing the elbows for t pieces on the overflows from tanks, you get a much better flow

  • Author

Thanks for the tip.

I noticed in the picture Bob posted that his system had tees at the overflows.

I have drilled small holes in the Elbows to assist with flow.

The pump I chose is capable of supplying 12 lpm to each tank. That's around 720lph(24 times turnover an hour for the 30 litre tanks).

I originally intended 300lp/h but having almost 3 metres of head meant there wasn't enough pressure to reach the top row effectively.

So i had to buy another pump(pandoras rack)

Unfortunately I chose 20mm bulkheads and 40mm pvc just can't cope with this much water.... The tees start overflowing.

All good . Next time i will upsize the bulkheads and the drain line or perhaps split it into a drainline for each level. Or I could leave everything as is but keep it single level and use a smaller pump. It's been a good learning experience.

I don't really think I need this much flow but if the rack was ever repurposed it could be useful.

I can't wait the fill it with shrimp.... You guys sent the air pump and sponge filters today so I should have an update soon.

if you put a t piece with tap just above the pump you can bleed off there back to sump to adjust flow going to tanks.

check out my rack biuld cherry lane

Edited by petfish

Looks awesome. Love your plumbing work and attention to detail.

 

:lolu:

Im keen to see how the works lights look :) im thinking about using them on my rack.

  • Author

I'll let you know when they arrive......

oh dont worry ill know 

 hobbit_super_hiding_skillz_by_kyla79-d5o

hahaha :secret laugh:

  • Author

That's a bit scary ;)

hahaha :jig: only coz im following the thread :=B:

  • Author

No I mean the ring forged in the fires of mount doom lol

Create an account or sign in to comment

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.