Jump to content

Grande Plans


Wraithie

Recommended Posts

Well the reason I was pointed in the direction of this forum was that I mentioned building a rack and wanted some ideas and advice.

I've been thinking about what I want from my tanks, and how I would like to set them up and maintain them. It's been great being able to see how others have gone about this project and get some ideas on what to and not to do.

One of the requirements I have on all my tanks is that they have to be attractive and well maintained, so substrate and scaping will be necessary. I also love trying new scaping techniques to develop different scenes and vistas, and having a number of smaller tanks will allow me to try a few things at once and let them have time to grow without me fiddling too much. I want to keep and breed a few colours of shrimp as well as some endlers and smaller cichlids so have tried to design my rack with flexibility in mind.

I have decided on a rack-it system from bunnings, just the 1200x450x1800 to begin with, and a mixed 10 tank setup.

The top shelf will be 3x cubes 320 square which will be 'display tanks', each featuring a different aqua scape, probably with HOB filters to keep each independent.

The plan for the middle shelf is a bank 1000 wide divided into 4x 250mm sections, with flow between them that can be run with an external canister(and sponge filters). The aim here is to allow selective breeding, or to keep crystals (easier to run a chiller).

finally the bottom shelf will be 3 larger tanks 400x35 which are for grow out or breeding of larger colonies or small cichlids. I'm looking at running sponge filters here.

I don't plan on plumbing everything together, at this stage I don't mind being hands on and would like to keep it simple.

Below is my mock-up sketch (depth perspective is a little off).

Please let me know if you have any suggestions or I'm doing something drastically wrong.

:)

Wraithie

post-3442-139909861625_thumb.jpg

Link to comment
Share on other sites

  • Replies 56
  • Created
  • Last Reply

Top Posters In This Topic

  • Wraithie

    19

  • Squiggle

    13

  • blackcat

    6

  • newbreed

    3

Top Posters In This Topic

Posted Images

Looks pretty good Tess, I'm sure the rack will change a lot between that drawing & the finished product, trust when I say I know it will, lol :victorious:

Link to comment
Share on other sites

Im still agonising over tank dimensions, i make a decision and then change my mind daily. Ill have to get the rack set up before i can confirm what i want (with a measuring tape!)

Link to comment
Share on other sites

If you have a mate that you can go and physically view his rack/tanks, it will give you a better perspective of tank size, spaces between shelve to top of tank....etc what filtration system are you installing, also consideration for a chiller, UV, etc...

Link to comment
Share on other sites

At this stage running the top and bottom shelves on individual filtration(mix of sponge/hob) and the middle bank will be where i can fit a cannister/chiller etc (so that i can keep crystals etc).

I know its not the most efficient way, but it gives me some more flexibilty as i want to keep a range of water parameters.

Link to comment
Share on other sites

In the first pic u will notice that the plumbing joins this is no longer the case, I now have the middle and boytom tanks separated.

20130622_214309.jpg

Top tanks for cbs crs (hence them being empty lol) they will have the shrimp soil in the bottom and fluval hangon filters so perams are easily controlled.

20130706_231718-1.jpg

The next 2 run with plumbing to one cannister 1500L, then the bottom 2 same thing plumbed to another 1500L cannister .. 20130706_231757-1.jpg

as the tanks are plumbed together I only need 1 heater in one of the tanks and as the water goes between both tanks via the cannister, temps only vary by 0.5C. Thats just my setup. ..I am yet to divide all the tanks into 3 :-)

I love the drawing u did and look forward to watching it transform :-), it will change ... mine used to run via a sump but didnt like that so worked out a way to run viaa huge cannisters instead.... less maintenence as shrimp have a low bioload :-)

Hope this mihht give u some ideas for your oen setup :-D happy planning

post-3445-139909851426_thumb.jpg

Link to comment
Share on other sites

  • 2 months later...

Update time!

You would think that buying a bunnings rack is easy, but noo...not in the length that I wanted. Only 1 store in the greater brisbane area had the 1.2m x 45cm setup that I wanted.

From that I was able to decide on measurements and it was then an anxious wait for the tanks to be built. It ended being fairly faithful to my original design.

For anyone that was wondering, even with these shorter shelves there is still some flex (do what those who know advise and go for 2nd hand pallet racking). The tanks I have aren't large enough for it to be a massive concern but I expect in the future I will put additional bracing in.

post-3442-139909853875_thumb.jpg

post-3442-139909853879_thumb.jpg

Link to comment
Share on other sites

Some MrShrimp moss and heavyD sunkist (both of these guys are extremely generous)

post-3442-139909853884_thumb.jpg

Link to comment
Share on other sites

Looking very cool & definitely very close to the original plan, well done! Now to fill it with more shrimp & start breeding some seriously cool patterns. :encouragement:

Link to comment
Share on other sites

Great update! You must be thrilled with the new setup Wraithie, it looks brilliant!!

Link to comment
Share on other sites

Nice one Tess!

... now for some Rili's ....

Do you want to wait till its cycled or just throw them in? ;)

Theres a tester wild throwback cherry playing Canary as of last night

Link to comment
Share on other sites

Sadly the hc I got from the auction hasn't survived the elements quite so well, so I'm waiting for it to bounce back, or to buy some more before I put water in

Link to comment
Share on other sites

I thought about it, decided against it but now you mention it I'm contemplating again

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Join Our Community!

    Register today, ask questions and share your shrimp and fish tank experiences with us!

  • Must Read SKF Articles

  • Posts

    • sdlTBfanUK
      I would hazard a guess that perhaps those eggs were unfertilized and thereby unviable? Did the eggs change colour, usually yellow to grey as the yolks used up, or any eyes in the eggs. Is your water ok, using RO remineralised and the parameters in range, as I have heard others say that if the water isn't good it can 'force' a molt? How is it going overall, do you have a good size colony in the tank, you may have reached 'maximum occupancy' as a tank can only support so many occupants.
    • beanbag
      Hello folks,  The current problem I am having is that my Taiwan bee shrimp are molting before all their eggs have hatched.  Often the shrimp keep the eggs for 40+ days.  During that time, they lose about half or so, either due to dropping or duds or whatever.  Shortly before molting they look to have about a dozen left, and then they molt with about half a dozen eggs still on the shell.  Then the other shirmp will come and eat the shell.  These last few times, I have been getting around 0-3 surviving babies per batch.  I figure I can make the eggs hatch faster by raising the water temperature more (currently around 68F, which is already a few degrees higher than I used to keep it) or make the shrimp grow slower by feeding them less (protein).  Currently I feed Shrimp King complete every other day, and also a small dab of Shrimp Fit alternating days.  Maybe I can start alternating with more vegetable food like mulberry?  or just decrease the amount of food?
    • ngoomie
      Yeah, cancer risk was a thing I'd seen mentioned a lot when looking into gentian violet briefly. I kinda just figured it might only be as bad as the cancer risk of malachite green as well, but maybe I should look into it more. I've been doing a pretty good job of not getting it on my skin and also avoiding dunking my unprotected hands into the tank water while treating my fish at least, though. Maybe I'll just not use it once I'm done this course of medication anyways, because I know a store I can sometimes get to that's pretty distant carries both malachite green and methylene blue, and in pretty large quantities.
    • jayc
      Can't help you with Gentian Violet, sorry. It is banned in Australia violet for potential toxicity, and even possible cancer risks. I thought it was banned in Canada as well. At least, you now know why there isn't much info on gentian violet medication and it's use. But keep an eye on the snails after a week. If it affects the snails, it might not kill them immediately. So keep checking for up to a week. Much safer options out there. No point risking your own life over unsafe products.
    • ngoomie
      Hello! I have a tank that currently does not contain shrimp, but does contain neon tetras which I am currently treating for Ich, as well as some bladder snails. Shrimp will be a later addition, likely cherry shrimp but I'm still doing research just to be sure. Initially I'd intended to buy some sort of Ich-fighting product that contains malachite green after doing a decent bit of research on it, most of which indicated that it should be shrimp-safe so I'd be good if I ever needed to use it again once shrimp were actually introduced (though I should note I'm aware shrimp can't get Ich, I'm more wondering in case the tetras could get Ich again, or something else that responds to similar medication). I ended up not being able to find any MG-containing products without either having to travel quite far or wait multiple days for delivery (which I was worried could lead the Ich to be fatal), and ended up picking up 'Top Fin Ick Remedy', a product that contains gentian violet which is a triarylmethane dye like malachite green. The bottle has two slightly differently worded warnings about its use with invertebrates ("not recommended for" and "not safe for" respectively), but when I'd been researching malachite green, I'd also heard of products that contain MG but not any other ingredients that would be harmful to inverts still being branded with warnings that they could be harmful, just as a "just-in-case" since the manufacturer didn't test it on any inverts, and I'm wondering if maybe it could be a similar situation here. I'm having a very very hard time finding information about gentian violet's use in fishkeeping at all though, it seems currently extremely uncommon. What I will say though is that I'm on day 2 of treating my tetras with it, and the bladder snails seem just fine -- in fact today I noticed what looked to be a bladder snail that appeared to be newly hatched (because of its size) that I hadn't seen before that was zipping around the tank without issue. But obviously, shrimp are not snails, and bladder snails are also notoriously hardy little guys, so what I'm seeing right now could easily be totally inapplicable to cherry shrimp. It might even be inapplicable to other species of snails, for all I know. Has anyone else here ever used anything that contains gentian violet in a tank that actually does contain shrimp? Were they okay, or should I make sure to not use it once shrimp are added?
×
×
  • Create New...