Jump to content

Sjn5188 New shrimp setup.

sjn5188

By sjn5188
in Shrimp Tank Setup

 Share

Recommended Posts

sjn5188 Shrimp Enthusiast

sjn5188

Posted
  • Author
Posted

So now it was time to start the plumbing for the tanks, each divided section will have its own intake and out take. I used 25mm pipe then a stainless strainer for the intake and 19mm for the return pipe then reduced to 13mm for the outlet. The bottom half of the bulk head actually sits between the tank and the board so all I have to do is just screw the top half of the bulkhead into each half.

shrimpoutlet3_zpsef5f714b.jpgshrimpoutlet2_zps263c6590.jpgshrimpoutlet_zps76bf6c61.jpg

Link to comment
Share on other sites
sjn5188 Shrimp Enthusiast

sjn5188

Posted
  • Author
Posted

After the bulk heads I added 25mm elbows or tee pieces, depending on their position than connected them all together and ran one 25mm return to the sump.

shrimppipe4_zps212dde98.jpgshrimppipe2_zpsc6c89fa1.jpg

Link to comment
Share on other sites
sjn5188 Shrimp Enthusiast

sjn5188

Posted
  • Author
Posted

I had a problem with the strainers sitting too low in the tank which caused the water to only come up about 40mm from the top. I couldn't raise them because of the lids and I wanted to raise the water levels in the tanks. So to fix the [roblem I cut a piece of pvc pipe that fitted over the strainers and sat them ontop. This raised the level of the water without even having to glue the pipe in place.

shrimppipe3_zps8b9c8760.jpg

Link to comment
Share on other sites
BlueBolts Shrimp Guru

BlueBolts

Posted
Posted

Great work, coming along very quickly...is there a diff, or adv/disadv or having the overflow on the side/back of the tank, rather then the bottom?

Link to comment
Share on other sites
Trav80 Shrimp Breeder

Trav80

Posted
Posted

Great question Marcus, I'm wondering the same thing. After speaking with a couple of people the main issue I have heard is that the side or rear mounted bulkhead may block easier, but I'm willing to hear more from other people that have been there and done that.

Link to comment
Share on other sites
sjn5188 Shrimp Enthusiast

sjn5188

Posted
  • Author
Posted
Great work' date=' coming along very quickly...is there a diff, or adv/disadv or having the overflow on the side/back of the tank, rather then the bottom?[/quote']Yep thats right with the side mount overflow you only have water going into about half the diameter of the bulkhead, but with a bottom mount you have water that can flow around the total area of the bulkhead making it drain more efficiently. both ways have there pro's and cons. Side mount you loose space at the back or side of the tank due to plumbing. but with bottom mount you dont. but on the other hand you loose space underneath the tank with bottom mount's and none with side. I have used both and I like both setups. You just need to think about what will work for you in regards to space, looks and flow rates.
Link to comment
Share on other sites
  • 1 month later...
sjn5188 Shrimp Enthusiast

sjn5188

Posted
  • Author
Posted

The tank is now set up and running with shrimp. Just building up my stocks and quality before I start any breeding programs. I hooked up a 5m led strip lighting for the room you can see a one metre strip under the top tank.

20130208_172344_zps1e269ee7.jpg

some pics of my shrimp. Big thanks to Dean for helping me out with some new shrimps to build my stocks up.

20130208_172322_zpsed4ffbbb.jpg20130208_172311_zpsbb20c868.jpg20130208_172305_zpsad75a39d.jpg

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Join Our Community!

    Register today, ask questions and share your shrimp and fish tank experiences with us!

  • Must Read SKF Articles

    Shrimp Disease and Treatment
    Tibee, Taitbee, Pinto, Mischling, F1, F2

  • Tropical Fish Forum
    Discus Breeding Guide
    Discus Disease and Treatment Guide

  • Posts

    • beanbag
      Shrimp molting before eggs are hatched

      By beanbag · Posted

      That shrimp itself survived the molt just fine, but left about half dozen eggs still in the shell. I haven't measured KH in a really long time, but assume it is zero since I don't have any rocks besides a few small pieces of lava rock.  Maybe you have unwanted rocks in your tank?  My tank is the "long" style which I really like because I have a HMF on one end, and a pump outlet spout that shoots water all the way to the other end.  I have no idea how many shimp it can support because I don't really understand waste management in a tank.  Shrimp poop eventually turns into mulm, but then what?
    • sdlTBfanUK
      Hydra

      By sdlTBfanUK · Posted

      As at time of this post the SL Aqua is available from this UK website, https://gbeeshrimp.co.uk/product/z1/
    • sdlTBfanUK
      Hydra & Planaria shrimp safe removal.

      By sdlTBfanUK · Posted

      Just in case someone may be looking for the SL Aqua it is available from this UK website at time of this post, https://gbeeshrimp.co.uk/product/z1/  
    • sdlTBfanUK
      Shrimp molting before eggs are hatched

      By sdlTBfanUK · Posted

      Thats a great photo, beautiful blue bolt, I hope it survived the molt without dropping the eggs! I think I can just about see some black dots (eyes) on the central egg but can't be 100% sure. I used to (and plan to again) do weekly water change of 10-15% but if you do too large or quick (not drip in new water) that would likely trigger a molt. What KH are they in, my new setup is sitting at (and refusing to budge) KH 3 and PH 7.5 so I may have to settle for neocaridina shrimp this time as opposed to the caridina I want, though not looking/deciding just yet, give the tank a bit more of a run in! Tap water here starts at kH 14, tds 320, when filtered goes to KH 0 and PH 6 but when put in the tank keeps going to KH3 and PH 7.5 despite 3 x 50% water changes???? You may be at 'maximum capacity' with only 20L tank especially if the tank is a cube type rather than shallow type?
    • beanbag
      Shrimp molting before eggs are hatched

      By beanbag · Posted

      Right now this tank only has blue bolts and golden bee (red bolts?).  The eggs start off all brown, but at the end, I notice that some are kind of a clear pink-ish color.  So I don't know if that is the egg color of dud or golden bee.  Picture of shrimp only about half hour before molting. The water is always RO + remineralizer, so it should be ok. The tank seems to still be on a "good streak" ever since I started the regimen of weekly water change, monthly gravel vac and plant trim.  The point being to keep the amount of waste low and removing moss / floating plants so that the nitrates go towards growing algae.  At one point, I had three berried females, but only netted about half dozen babies by the end, due to this early molting problem.  There might be about 30-40 shrimp total in 5 gallons, but still very few full-sized adults.
×
×
  • Create New...