Jump to content

My DIY Shrimp tanks


plecofan09

Recommended Posts

Ok guys, think its time i put up my shrimp tank build , i have been putting this off for a long time.

Basically in my house the missus took up all the space to make sure i didnt have any room for a big fish tank.

But there was a little 2ft space where i could sneak in a 2 ft tank in :D.

i didnt have a 2ft tank , but a good friend of mine had some 8mm glass so we made a 2ft tank 18"deep 16" high.

i also had a 50cm tank lying around so, now thinking of making a stand to fit both tanks.

I had some aquasoil lying around so though of making 2 planted tanks and try to impress the missus:D.

SO the plan was to build a nice stainless steel stand.

ok so here are the pics

post-24-139909858998_thumb.jpgpost-523-139909847704_thumb.jpgpost-523-139909847705_thumb.jpg

Cutting up the 40mm S/S box and welding them up

After i finished welding , the stand then looked like this

post-80-139909847708_thumb.jpgpost-80-139909847712_thumb.jpg

i will upload more pics later

post-514-139909858556_thumb.jpg

post-514-139909858561_thumb.jpg

post-514-139909858568_thumb.jpg

post-514-139909858573_thumb.jpg

post-514-139909858578_thumb.jpg

post-514-139909858583_thumb.jpg

Link to comment
Share on other sites

Nice work on the staino stand man, I've had a few friends wanting ss stands but once you mention the extra cost mild always gets the nod.haha

Link to comment
Share on other sites

Nice work on the staino stand man' date=' I've had a few friends wanting ss stands but once you mention the extra cost mild always gets the nod.haha[/quote']Yeah S/S Does cost a bit more, but i like the look of it.yeah Bailey let me put some more pics up.
Link to comment
Share on other sites

Found some ply at work , Scotty(work mate) at work said i should of stained it darker :sorrow: , but the price was right FREE!:cool-new:

[ATTACH=CONFIG]1526[/ATTACH]

Link to comment
Share on other sites

Woweee....love the SS Stand....hope you're gonna get the SS lilly pipes to match ? +1....love more pics and progress....

Link to comment
Share on other sites

sweet looking stand mate and great DIY skills there.

where did you get the XL bucket of chuba chumps lol i want it :)

Link to comment
Share on other sites

I think the stand looks fantastic! Can imagine it fitting in really well with all the modern stainless steel appliances floating around.

Link to comment
Share on other sites

Woweee....love the SS Stand....hope you're gonna get the SS lilly pipes to match ? +1....love more pics and progress....
No SS pipes as i have no room for a canister filter ' date=' but i did make up some S/S intake pipes and use a sponge as a filter , will take a pic if i am bother to take it out of the tanks in the garage.
sweet looking stand mate and great DIY skills there.where did you get the XL bucket of chuba chumps lol i want it :)
Thans Dean , yeah took a long time eating all the chuba chopsok the next step was to work out a co2 system, as i have never tried making one before , so i purchased 2 bubble counters with oneway check valves and 2 glass difusers.A good mate of mine gave a a dupa 1.5lt co2 bottle and i happen to have a co2 reg at home.i found an 240vt soleniod at work and put a plug on it.Measured the bottle and made a stand for it as ididnt have much space where i was puting the tank.Now i had to somehow put all the together and make it work.So i came up with this.post-24-139909847844_thumb.jpg[ATTACH=CONFIG]1600[/ATTACH][ATTACH=CONFIG]1601[/ATTACH]i tested it out before and it worked a treat could easily control the bubbles from fast to really slow consistiently.was really happy until the next day a ran out of co2 , i had just refilled it that day.Must be a leak some where!:mad:So i refilled it again , but this time got some soapy water and started spraying and sure enough found the leak pressure infeed on the soleniod sealed it up and sweet as all fixed :smiley_simmons:

post-514-139909847396_thumb.jpg

post-514-139909847399_thumb.jpg

post-514-139909847404_thumb.jpg

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Join Our Community!

    Register today, ask questions and share your shrimp and fish tank experiences with us!

  • Must Read SKF Articles

  • Posts

    • sdlTBfanUK
      Thats a great photo, beautiful blue bolt, I hope it survived the molt without dropping the eggs! I think I can just about see some black dots (eyes) on the central egg but can't be 100% sure. I used to (and plan to again) do weekly water change of 10-15% but if you do too large or quick (not drip in new water) that would likely trigger a molt. What KH are they in, my new setup is sitting at (and refusing to budge) KH 3 and PH 7.5 so I may have to settle for neocaridina shrimp this time as opposed to the caridina I want, though not looking/deciding just yet, give the tank a bit more of a run in! Tap water here starts at kH 14, tds 320, when filtered goes to KH 0 and PH 6 but when put in the tank keeps going to KH3 and PH 7.5 despite 3 x 50% water changes???? You may be at 'maximum capacity' with only 20L tank especially if the tank is a cube type rather than shallow type?
    • beanbag
      Right now this tank only has blue bolts and golden bee (red bolts?).  The eggs start off all brown, but at the end, I notice that some are kind of a clear pink-ish color.  So I don't know if that is the egg color of dud or golden bee.  Picture of shrimp only about half hour before molting. The water is always RO + remineralizer, so it should be ok. The tank seems to still be on a "good streak" ever since I started the regimen of weekly water change, monthly gravel vac and plant trim.  The point being to keep the amount of waste low and removing moss / floating plants so that the nitrates go towards growing algae.  At one point, I had three berried females, but only netted about half dozen babies by the end, due to this early molting problem.  There might be about 30-40 shrimp total in 5 gallons, but still very few full-sized adults.
    • ngoomie
      Alright, I've done a bit more research on gentian violet's cancer-causing potential but I haven't yet done research on malachite green's to compare. But from reading the California propositon 65 document about GV (North Americans incl. some Canadians will recognize this as the law that causes some products they buy to be labelled with "known to the state of California to cause cancer", including the exact product I bought) it seems that the risk of cancer is related to internal use, either injection or ingestion. Speaking of ingestion, I think GV bans mainly relate to its use in treating fish/shrimp/etc. which are intended for human consumption, because of the above. And in countries where GV isn't banned for this purpose, it does seem to get used on various species of shrimp without causing any issue for the shrimp themselves (at least enough so for shrimp farming purposes). See the following: In February, the FDA Began Rejecting Imported Shrimp for Gentian Violet and Chloramphenicol (2022 article by Southern Shrimp Alliance) FDA Starts New Calendar Year by Refusing Antibiotic-Contaminated Shrimp from Three BAP-Certified Indian Processors and Adding a BAP-Certified Vietnamese Processor to Import Alert (2024 article by Southern Shrimp Alliance) Southern Shrimp Alliance and some other organizations have tons of other articles in this vein, but I'd be here for a while and would end up writing an absolutely massive post if I were to link every instance I found of articles mentioning shrimp shipments with gentian violet and/or leucogentian violet registering as contaminants. That being said, I know shrimp farmed for consumption and dwarf shrimp are often somewhat distantly related (in fact, the one time a shrimp's species name is listed that I can see, it's the prawn sp. Macrobrachium rosenbergii, who at best occupies the same infraorder as Neocaridina davidi but nothing nearer), but this at least gives a slightly better way of guessing whether it will be safe for aquarium dwarf shrimp or not than my bladder snail anecdote from the OP.
    • sdlTBfanUK
      I would hazard a guess that perhaps those eggs were unfertilized and thereby unviable? Did the eggs change colour, usually yellow to grey as the yolks used up, or any eyes in the eggs. Is your water ok, using RO remineralised and the parameters in range, as I have heard others say that if the water isn't good it can 'force' a molt? How is it going overall, do you have a good size colony in the tank, you may have reached 'maximum occupancy' as a tank can only support so many occupants.
    • beanbag
      Hello folks,  The current problem I am having is that my Taiwan bee shrimp are molting before all their eggs have hatched.  Often the shrimp keep the eggs for 40+ days.  During that time, they lose about half or so, either due to dropping or duds or whatever.  Shortly before molting they look to have about a dozen left, and then they molt with about half a dozen eggs still on the shell.  Then the other shirmp will come and eat the shell.  These last few times, I have been getting around 0-3 surviving babies per batch.  I figure I can make the eggs hatch faster by raising the water temperature more (currently around 68F, which is already a few degrees higher than I used to keep it) or make the shrimp grow slower by feeding them less (protein).  Currently I feed Shrimp King complete every other day, and also a small dab of Shrimp Fit alternating days.  Maybe I can start alternating with more vegetable food like mulberry?  or just decrease the amount of food?
×
×
  • Create New...