Jump to content
sdlTBfanUK

TAP WATER-Taiwan Bee-UK-(zerowater)

Recommended Posts

kms

I just did a test on the company water, using the drinks machine, I get 003, when testing the tap water I get 076

Share this post


Link to post
Share on other sites
sdlTBfanUK

You should get over 200L then!

I'm not too sure what you mean about the 003 company water/drinking machine. The water after filtering will be 000 but you have to put it into a clean and dry container from the filter. If you have used a container that held tap water first then the little water that was still in the container may give you small reading, if that makes sense? So don't use a jug to pour the water into the filter and then pour the water back into that jug without drying that jug first??

Simon

Share this post


Link to post
Share on other sites
kms

I didn't use the zerowater, I just took a reading from water of our drinking machines, it contains a RO, and also taken the reading from a tap, in both case, the water was in a ordinary ceramic cup.

  • Like 1

Share this post


Link to post
Share on other sites
sdlTBfanUK
1 minute ago, kms said:

I didn't use the zerowater, I just took a reading from water of our drinking machines, it contains a RO, and also taken the reading from a tap, in both case, the water was in a ordinary ceramic cup.

OK, that makes more sense.

Simon

  • Thanks 1

Share this post


Link to post
Share on other sites
kms

When you use the zerowater, do you keep the dispenser filled up, or only put water through the filter when in need. I see the filter will start to wear off if you keep the dispenser fill with water.

Share this post


Link to post
Share on other sites
sdlTBfanUK

I have always filtered the water through the jug and then it goes into another container like a bucket (where it may sit for a few days) to be carried so I haven't had water sitting in it. I am not aware whether leaving water in the jug will reduce the life of the filter or not?? I only got the small jug so it only does 1L at a time anyway!

Simon

  • Thanks 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • greysmithy
      By greysmithy
      Hello guys,
      I am curios how a cross-breed would look like between the galaxy pinto and the TB.
      Does anyone here have a picture of the cross-breed? I would love to see how they look.
      I have looked every  were but can't find anything about them.
       
      Kind regards,
      Greysmithy
       
    • Karoluks
      By Karoluks
      Hello,
      Feeling that i have enough experiance to start with taiwan bee colony. Think about new setup for 20-25 taiwan bees.
      What mix with KK`s you guys prefer/offering?
      Now i`m thinking KK + R Rubies, maybe some pintos. Looking forward your ideas :)
    • Shrimp Farm
      By Shrimp Farm
      Hello guys.
      I'd like to share some of my Pinto mix. Hope that U like them. Plis tell me aswell should I start as a part of my chanel english version :)
       
    • hihat
      By hihat
      I got some nice specimen from my mix-aquarium with TB's, pinto's, taitibees etc, etc, The first 2 photos (I think) must be a mix from a pinto zebra and a kingkong, The red one is probably a red tiger and the same father? I've got 2 of the  blacks and about 10 of the red ones, I have put them apart from the rest and see what the next genereation will be. Sorry for the quality of the photo's, they're just from my iPhone, the macrolens I ordered hasn't arrived yet :-(
      Greetings from the Netherlands
       



    • cipas
      By cipas
      Hey guys,
      Does anyone breed blue bolts from mischlings ? I've searched for a guide but didn't find one, read a lot about crossbreeding and soon I want to start a project to produce my own blue bolts.
      I need your advices on this.
      Thank you! 


  • Must Read SKF Articles

  • Register today, ask questions and share your shrimp and fish tank experiences with us!

    Join Our Community!

  • Posts

    • sdlTBfanUK
      Sorry to hear that putting your shrimps with the betta didn't go well. My first betta couldn't have shrimps either as he would go after them. My current betta is ok though, he gets very close and watches them but nothing else? It would be best to have a filter if you can get one small enough, and if it is adjustable have it on low flow because it is a small tank, the shrimps are fine in flowing slow water,! Are you planning to keep them in this tank long-term or is this tank temporary until you decide where to go next with them? It is possible that some may die from injuries/stress/shock etc, but hopefully they will be ok. Simon
    • FancyBubbles
      On Saturday I wanted 8 ghost shrimp for my betta (he's in a 12 gallon). Mostly for extra cleaner, while also expecting the my betta trying to eat them. After one night, he ate out the eyeballs of 3 shrimp while the remaining 5 seemed to be attacked but not too damaging. Currently they're in a 2.5 gallon tank, no filter, gravel as substrate, 1 moss ball, 2 plastic plants, and a small castle for hiding. For food I put one algae wafer (in tank right now) and plan to put pieces of lettuce or cucumber after a couple of days. My question is, do ghost shrimp need filter? I currently have 5 of them in the 2.5 gallon tank. If they do I'm planning on to get a certain sponge filter that's safe for shrimp and small enough to not cause too much current.
    • sdlTBfanUK
      Although losing the last killie must have been upsetting, it does now give you a clean working space for getting the parameters sorted and then you can look forward to getting some replacement killie - I love killie, even more than Betta but it is a bit too involved for me so I have avoided it so far! If your guppies are anything like mine (endlers), fin and tail marks will happen a lot and clear up almost as quickly, they are far too curious/nosey and go into every gap, under moss pads, squeeze behind the filters etc and so mine I have put down to them having just gone somewhere that they have got a small tear or caught on something - behind a filter or too close to a mesh pad etc? Simon
    • sdlTBfanUK
      Thanks for the heads up! I left the tank a month without shrimps even though they 'say' you can safely use  with shrimps immediately. I'm not all that happy with it in all honesty, I would use the JBL pro scape again in future as it just isn't going as well this time and although the plants are showing a bit of growth it all looks a bit drab and brown compared to Bertie (the betta) tank which is so lush and green and gets WOW from most visitors. The JBL required 50% water changes twice a week for the first 2 weeks but that extra work was well worth it for the better end result! Simon
    • Crabclaw
      Thx blue ridge for the advice, currently my problem is with the tds and hardness of the tank. The endler guppy no longer has a problem with her tail, and sadly the rocket killie has passed away. All of the other fish look fine, and I think the reason my killies have had it tough is due to the hardness being way too much for them. As there doesn’t seem to be a disease with them, my main focus is to get the hardness down before I lose my last 2 😢. 
×