Recently decided to invest in an RODI unit to improve the quality of the water in my shrimp tanks and reduce the margin for any catastrophic deaths. However, sadly my LFS doesn't seem to carry anymore SS Bee Shrimp GH+ minerals. The owner does however have the fish version for soft-water environments and he claims that there isnt a difference. The dosage amount seems similar between the two as well. Does anyone have any experience with using it with shrimp?
The packaging looks like this in case anyone was wondering!
Thanks in advance!!
I am new to keeping shrimp and was hoping someone can help me sort through some issue with the water parameters of my tank. The tank is a 4.6 gallon cube, that runs between 72 - 74 (22.22 - 23.33) degrees, 0 ammonia, 0 nitrates and 0 nitrites. It has been cycled and running since December 2015 but about a month back converted to a shrimp tank (removed the fish, did a 100% water change and added sponge over filter). Current inhabitants are a nerite snail and 1 RCS. I initially had 3 RCS, but lost two. I believe this was due to them trying to molt as they both had white lines on their back, but were fine the day before (one after 7 days and another after 12 days). I also have some java jerns, java moss, dwarf sags, crypt wendetti, and some floaters.
Current water parameters:
My PH is also low (6 something if I recall but can measure this again if needed). I am using tap water that I add prime to that is then place in a rubbermaid with a powerhead until I need to do top offs / water changes. So far all I have done is top off on the shrimp tank. My plan is to pick up some Salty Shrimp and add that to the tap water to raise GH and KH. I believe I should be shooting for a GH between 6-8 and KH of 2-5, with a TDS between 80 and 200. I also plan to add some iodine twice a week to try and address the molting issue.
Does this seem reasonable? Any additional changes I should be making or consider? Once the water parameters are in order, I would like to add some additional RCS to the tank.
Hi everyone, I have spent some time searching (unsuccessfully!) for any threads set up to address how to naturally and chemically treat the more important water parameters. Obviously I'm not talking about temp, but the PH, TDS, KH and GH levels are the ones I'm most interested in. Now I'm country based so the only water I've got access to is R/W and bore (perfectly drinkable from the pump itself, no brackishness) which I have used for 4 of my 6 tanks (tropical and a few lower grade cherries). But I want to better hone in the water condition as best I can so any tricks to raise lower the above parameters naturally or if need be chemically. Or if anyone knows/finds a link, anything will be appreciated.
Had put this in the pinned "Shrimps 101" but will try to delete it as it's probably better as a separate post.
Being rural makes water choice difficult and some of the values I've tested are way out, hence why I'm seeking advice.
Hey SKF peoples,
I'm just mixing up my RO water with a combination of GH+ and GH/KH+ to keep tiger shrimps in. And I thought I'd share my experience, I gradually added the minerals and measured pH along the way and I thought I'd share the results.
I note that the pH may change overnight after letting stand but I have been running a pump in the water to mix it well and aerate it so I doubt there will actually be any measurable shift.
As you can see by the results, the GH/KH+ pushed up the pH a LOT! Does anyone else have this experience? I have achieved my desired water parameters in terms of ppm and GH/KH however the pH is unreal.. and this is not the first time this has happened to me either. However t is the first time I have taken the effort to document the fact.
I'm planning on experimenting with adding a very shallow layer of the cal aqua labs black earth premium and monitoring the pH over the course of days.. expecting it to slowly drop...
Any input is 100% welcome!
love n peace
PS the initial drop in pH after adding the first lot of GH+ I understand can be explained (as I have read elsewhere) that when attempting to measure the pH of RO water using a pH meter the device can not accurately produce any result due to the lack of ions/conductivity in the water.
27/05/2016 EC meter HM TDS-3 pH meter pH APIkit KH GH At time of water mixing EC0 ppm0 fresh RO 6.6 after adding 50ppm GH+ 6.3 after adding 30ppm GH/KH 7 after adding 25ppm GH/KH 7.5 after adding 45ppm GH/KH EC300 8.3 after adding 17ppm GH/KH EC333 ppm175 8.3 7.8 3 8
just wondering what kind of TDS increases people find in their shrimp tanks on a weekly or monthly basis or whatever?
i'm just trying to get a general feel for things, any input will be greatly appreciated :-)
if you could also share i think it would be helpful to also know what size tank, how heavily stocked it is and feeding frequency..
thanks in advance,
love n peace