This is my first tank.
It is a Fluval Flex 9. I have a plan to make sure no shrimp get into the filter compartment I think will work - knitting mesh on the wall, large pore sponge filling up the intake chamber. I am also planning to keep the water level about an inch below the top of the wall leading to the compartment. As for flow, the current version seems to have a pretty docile pump doing something like 60 gph, and it's not exactly wreaking havoc on my plants, so I'm hoping it'll be fine.
I've included a picture of the current setup.
PLANTS: By the time I have shrimp, I expect the surface to be about 75% covered with salvinia and dwarf water lettuce, which are growing quite quickly. On the ground I have some Marimo moss balls, crypt parva, microsword, and Monte Carlo. They are all doing fine and I am not expecting rapid growth. Everything is stable after initial die off of the plants. I am not planning to use ferts, as several of the suppliers I contacted suggested that shrimp did better in un-dosed tanks. Should I add or remove anything?
STONE: that's Ohko Stone in my tank. The gravel is Seachem Flourite.
WATER: at the moment, it'll be tap water, but my cycle seems to have really messed with my parameters. Out of the tap, I'm seeing pH 7.4, Gh 7, Kh 3, but I have seen all of those stats take a nose dive over the last few weeks as I cycled the tank. That's one of the big questions I have to get answered before adding shrimp. I am debating RO, but would like to run with tap. I have a 29 gallon that has been quite stable, albeit with fish only. We'll see if, now that I have cycled the tank, I can get things stable in 8 gallons of water.
No heater. House is routinely at 70 degrees and the tank is literally 10 feet from the thermostat.
Your advice will be appreciated. Here's my pic.