Jump to content

Awesome shelves


fishmosy

Recommended Posts

So as noted in the "flimsy shelves review",

I was having trouble with the set-up sitting on a flimsy set of shelves. Last weekend I swapped over to the "Rack It" shelves from Bunnings - the thickest steel version which comes in black (which I used) or galvanized. I am super happy with this set-up and still kicking myself that I didn't use it to begin with. Its 1200 long BETWEEN the uprights, and 400 mm wide. All the shelves are fully adjustable to any height and you can have as many or as few shelves as you like without paying extra because all the pieces for the stand come separately. I went with four shelves.

The set-up:

Sorry for the blurry pics, I forgot to switch the camera from macro mode :giving-up:

P1050613.thumb.JPG.510cd9f5dca218aed4fa8

While setting up I stood in the center of one of the horizontal beams and it barely flexed. I lay down on the shelves and there was no movement.

P1050621.thumb.JPG.44cf1b9a6b27b1f0698d7

 

Only one minor issue/change:

To get the bottom horizontal beam to sit on the bottom, you have to trim the bracket on the two ends of the two horizontal beams (and paint the bare metal to stop corrosion). This gives you an extra 50mm between the bottom shelf and the shelf above. I used an angle grinder to make the cuts and I had some paint left over from painting the mdf shelves (which you should also do otherwise they will swell if they get wet, and they will get wet being around tanks! :aha-!:) which took about 20 mins total including dragging the angle grinder out of the cupboard and fitting a new blade. Cutting time was only 2mins for all four cuts. I think an extra 50mm is worth 20 mins of extra set-up time.

 

Usual bracket

P1050612-P50.thumb.jpg.58e2e59d10caa47c5

Trimmed bracket

P1050611-P50.thumb.jpg.32565216595f282ce

 

P1050613.thumb.JPG.510cd9f5dca218aed4fa8

P1050621.thumb.JPG.44cf1b9a6b27b1f0698d7

P1050612-P50.thumb.jpg.58e2e59d10caa47c5

P1050611-P50.thumb.jpg.32565216595f282ce

Edited by fishmosy
  • Like 4
Link to comment
Share on other sites

Very nice Fishmosy, they were the ones I was talking about as well. The rack looks really good fully assembled. The extra side bracing is really good and dosen't take away from the overall look.

It's gonna look really good when the tanks are set up. Looking forward to seeing photos of the entire setup when you have finished. 

  • Like 1
Link to comment
Share on other sites

  • 2 months later...

@fishmosy how is this holding up a couple of months later? Care to share price as well?

will grab a picture ASAP as soon as I get my camera back from a friend! I'm extremely happy with it and it looks superb. I've added more and more tanks with space to spare for two more tanks I'm getting shortly, and its still solid as a rock with no bowing (well at least as far as I can tell). I should have brought this rack from the start and not cheaped out.

Old saying - Buy cheap, pay twice. 

  • Like 1
Link to comment
Share on other sites

will grab a picture ASAP as soon as I get my camera back from a friend! I'm extremely happy with it and it looks superb. I've added more and more tanks with space to spare for two more tanks I'm getting shortly, and its still solid as a rock with no bowing (well at least as far as I can tell). I should have brought this rack from the start and not cheaped out.

Old saying - Buy cheap, pay twice. 

what size tanks u got on it?

Link to comment
Share on other sites

As promised, here is the stand today. I've whited out one tank as its a special project.

stand_fixed.thumb.JPG.83c1b30f97bf2d60df

The sizes of the tanks from top to bottom (and left to right) are:

4ft wide *1 high * 1.5 deep - holds L333 colony and rummynose tetras. Currently building an LED light for this tank.

AquaOne 32 Ecostyle - currently a temporary home for my Caridina cf. confusa.

Whited out tank: 2ft wide, 1.5 wide, 1.5 deep - classified

Aqua One 1ft cube - new setup for my Bloody Mary variant of Caridina davidi

No-name glass tank - cull tank holding cherry variants, some Aus. natives, natives, mosses and a few other bits and pieces. Will be retired once I purchase some new tanks.

Plastic tanks - temporary housing for moss and/or shrimp as required

Bottom tank - 3ft wide * 1ft high * 1.5 ft deep. New set-up for my confusa.

 

The plan is to purchase four new tanks (1.5 ft wide * 1 high * 1 deep) and put them 'end on' on the shelves - two on the second shelf down, one next to the cube, one next to the 3 ft. I have another 2 ft, (same size as 'classified' tank) which is currently (...................................redacted........................................................) but will be returning to the right hand side of the third shelf down (where the plastic tanks are). This should give me plenty of tanks to set up a dedicated tank for the Malanda, a choc cherry tank and a dedicated tank for KK, as well as a spare for culls and mosses ect.

 

 

what size tanks u got on it?

  • Like 5
Link to comment
Share on other sites

hmmmm must be cooking up shrimp crack

[emoji337] .. starts dialling 000...

Link to comment
Share on other sites

We should make a poll on what we all think is in there :) lol 

my vote is saluwasi :) was leaning towards baubalti 

Link to comment
Share on other sites

Heres a clue- Pics from the tank have already been posted on the forum, but only in its initial form during set-up. 

Link to comment
Share on other sites

Interesting that you are using 18 inch deep tanks on the 400 wide rack. Do you find any overhang doing this? I thought about this for the rack I am setting up but was worried the 1-2cm overhang would cause issues in the long run? Would make it easier to find 18 inch tanks rather than 16-17".

Have you got a photo of the tank edges? (Would like to see if it sits flat or with a bit of overhang.

Edited by s1l3nt
Link to comment
Share on other sites

Interesting that you are using 18 inch deep tanks on the 400 wide rack. Do you find any overhang doing this? I thought about this for the rack I am setting up but was worried the 1-2cm overhang would cause issues in the long run? Would make it easier to find 18 inch tanks rather than 16-17".

Have you got a photo of the tank edges? (Would like to see if it sits flat or with a bit of overhang.

there will be around 1-2cm of overhang which I will have towards the back of the rack. The front of the tanks will sit flush with the front of the shelves.  I use rubber foam underlays under all my tanks so there is absolutely no issue in doing it. In fact, you can have a large overhang on just about any tank. A prime example would be the "Edge" series of aquariums. The important thing is that the weight of the tank is spread evenly over the area it is resting on. 

Link to comment
Share on other sites

My guess on the mystery tank is a Bucephalandra tank.

You've certainly built a great multi-purpose rack.

Link to comment
Share on other sites

Thanks for the info fishmosy, that puts me at ease a little bit and might end up using my 2x18x18 that is in storage after all... Haha.

Out of curiosity, any chance you know what the rubber foam is called? Going to head to clark rubber in an hour or so (hopefully you actually see this before then haha).

Link to comment
Share on other sites

Sorry cant remember whats its called. I know its a 'seconds' material that costs about $50 for a sheet 19mm thick. It'll probably take 1.5 sheets to do everything I want but thats only because I wrapped the four foot on every side except the front and top. 

Link to comment
Share on other sites

Thanks for the info :) Ended up grabbing standard tank foam to go under the tanks. 10mm thick sheets. Looking forward to your progression shots :)

Link to comment
Share on other sites

  • 2 months later...

Congrats with the comp i love your work they both look very "realistic" and the shrimps look spectacular too :-)

anyway i wanted to to say thanks for posting your experience - is the rack still holding up well for you?

i was hoping you (and others using this or similar systems) could share some wisdom with me please !

im investigating setting up a rackit system myself but im thinking about two options.

i want to fit in 1x4ft and 8x 2ft tanks (plus i have another 2 1/2 and a 3ft tank i might want to accommodate in future.

option one is using the 1,2m x 600mm  shelves so that i can fit one tank in the middle and 2 at either end perpendicular (longways) to squeeze in 3 tanks per leve

other option is i may have enough space to fit in the 1.8metre rack in the new place i'll (hopefully) - based on your experience do you think  there would be any risk in having the 1.8m long system full of tanks?

thanks in advance

love n peace

will

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Join Our Community!

    Register today, ask questions and share your shrimp and fish tank experiences with us!

  • Must Read SKF Articles

  • Posts

    • ngoomie
      Alright, I've done a bit more research on gentian violet's cancer-causing potential but I haven't yet done research on malachite green's to compare. But from reading the California propositon 65 document about GV (North Americans incl. some Canadians will recognize this as the law that causes some products they buy to be labelled with "known to the state of California to cause cancer", including the exact product I bought) it seems that the risk of cancer is related to internal use, either injection or ingestion. Speaking of ingestion, I think GV bans mainly relate to its use in treating fish/shrimp/etc. which are intended for human consumption, because of the above. And in countries where GV isn't banned for this purpose, it does seem to get used on various species of shrimp without causing any issue for the shrimp themselves (at least enough so for shrimp farming purposes). See the following: In February, the FDA Began Rejecting Imported Shrimp for Gentian Violet and Chloramphenicol (2022 article by Southern Shrimp Alliance) FDA Starts New Calendar Year by Refusing Antibiotic-Contaminated Shrimp from Three BAP-Certified Indian Processors and Adding a BAP-Certified Vietnamese Processor to Import Alert (2024 article by Southern Shrimp Alliance) Southern Shrimp Alliance and some other organizations have tons of other articles in this vein, but I'd be here for a while and would end up writing an absolutely massive post if I were to link every instance I found of articles mentioning shrimp shipments with gentian violet and/or leucogentian violet registering as contaminants. That being said, I know shrimp farmed for consumption and dwarf shrimp are often somewhat distantly related (in fact, the one time a shrimp's species name is listed that I can see, it's the prawn sp. Macrobrachium rosenbergii, who at best occupies the same infraorder as Neocaridina davidi but nothing nearer), but this at least gives a slightly better way of guessing whether it will be safe for aquarium dwarf shrimp or not than my bladder snail anecdote from the OP.
    • sdlTBfanUK
      I would hazard a guess that perhaps those eggs were unfertilized and thereby unviable? Did the eggs change colour, usually yellow to grey as the yolks used up, or any eyes in the eggs. Is your water ok, using RO remineralised and the parameters in range, as I have heard others say that if the water isn't good it can 'force' a molt? How is it going overall, do you have a good size colony in the tank, you may have reached 'maximum occupancy' as a tank can only support so many occupants.
    • beanbag
      Hello folks,  The current problem I am having is that my Taiwan bee shrimp are molting before all their eggs have hatched.  Often the shrimp keep the eggs for 40+ days.  During that time, they lose about half or so, either due to dropping or duds or whatever.  Shortly before molting they look to have about a dozen left, and then they molt with about half a dozen eggs still on the shell.  Then the other shirmp will come and eat the shell.  These last few times, I have been getting around 0-3 surviving babies per batch.  I figure I can make the eggs hatch faster by raising the water temperature more (currently around 68F, which is already a few degrees higher than I used to keep it) or make the shrimp grow slower by feeding them less (protein).  Currently I feed Shrimp King complete every other day, and also a small dab of Shrimp Fit alternating days.  Maybe I can start alternating with more vegetable food like mulberry?  or just decrease the amount of food?
    • ngoomie
      Yeah, cancer risk was a thing I'd seen mentioned a lot when looking into gentian violet briefly. I kinda just figured it might only be as bad as the cancer risk of malachite green as well, but maybe I should look into it more. I've been doing a pretty good job of not getting it on my skin and also avoiding dunking my unprotected hands into the tank water while treating my fish at least, though. Maybe I'll just not use it once I'm done this course of medication anyways, because I know a store I can sometimes get to that's pretty distant carries both malachite green and methylene blue, and in pretty large quantities.
    • jayc
      Can't help you with Gentian Violet, sorry. It is banned in Australia violet for potential toxicity, and even possible cancer risks. I thought it was banned in Canada as well. At least, you now know why there isn't much info on gentian violet medication and it's use. But keep an eye on the snails after a week. If it affects the snails, it might not kill them immediately. So keep checking for up to a week. Much safer options out there. No point risking your own life over unsafe products.
×
×
  • Create New...