Jump to content

Benebachi Bee Max


mst_mugen

Recommended Posts

Hey all,

 

Just a quick question. How do you guys go about dosing Bee Max during your weekly dosing regime?

 

I find Bee Max to be small pieces clumped together as oppose to a fine powder. So when I dose I always get pieces stuck around my inlet, floating on the surface of the tank and floating around inside the tank.

 

I have also tried mixing the Bee Max first in a small container with tank water before dosing it into the thank. Unfortunately, the same thing happens.

 

How do you guys get around this? Is the Bee Max meant to be a fine powder or small clumps?

 

Thanks! :)

Link to comment
Share on other sites

Thank you for the post - it was a very informative thread

 

What exactly did you want to bring my attention to? The shrimp eat the clumps of Bee Max? Besides that, not too sure if the thread you posted actually answers my question.

Link to comment
Share on other sites

Any fine powder will clump when added to water. If you are really concerned, you can add the powder and some tank water to a blender, and blend on high for a minute or two. We use this method at work regularly for fine algae powders and pastes, but I'm not sure how practical it will be for you given you probably wont be using very much powder.

Link to comment
Share on other sites

Hello mugen,

I also put some tank water in a cup and put the bee max in and mix it up with a spoon. I then let it sit for 30 mins or so. I'll give it another stir then slowly add to. The tank.

I would say about 99% of it sinks down and doesn't clump. There are still some bits that float. I hope this helps

Link to comment
Share on other sites

Many thanks for your responses guys!

 

I guess my main problem (maybe) is that my Bee Max isn't a fine powder straight from the packet (i.e. the consistency of the content varies in size and texture). There seems to be larger pieces which aren't clumped up powder. It is these larger pieces that float around in the tank and on the surface - the powder falls straight to the bottom of the tank.

 

Disciple: I will try letting the Bee Max set for longer before I add it to the tank - hopefully that reduces the amount of large particles I get floating around in the tank and on the surface. Thanks.

Link to comment
Share on other sites

I always add it to some tank water first, let it soak & then suck it up with a turkey baster, then squirt it to the bottom of the tank, this way I get minimal floating bits.

A mortar & pestle sounds like a good idea too. :thumbsu:

Link to comment
Share on other sites

You might need to get a cheap mortar and pestle and grind it up

 

I always add it to some tank water first, let it soak & then suck it up with a turkey baster, then squirt it to the bottom of the tank, this way I get minimal floating bits.

A mortar & pestle sounds like a good idea too. :thumbsu:

 

Thanks for the suggestions guys... looks like I have some shopping to do LOL

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Join Our Community!

    Register today, ask questions and share your shrimp and fish tank experiences with us!

  • Must Read SKF Articles

  • Posts

    • sdlTBfanUK
      https://www.youtube.com/watch?v=58BrDSEY8KE  
    • beanbag
      One interesting thing he mentioned was "Bacteria pressure", which I guess just means number of bacteria around.  Yet I see all these other videos from shrimpkeepers bragging about how much bacteria their filtering system holds. Also interesting is no mention of using anti-biotics to treat bacterial infection.  I think that has fallen out of favor recently.
    • sdlTBfanUK
    • sdlTBfanUK
      It has been a few weeks now and I have done a couple of large water changes. I tested the water parameters this morning, GH6 and KH2, TDS 140 and PH 7.5. Obviously the PH is off but there isn't anything in the tank that should cause the PH to rise to this figure so I will just run the tank for another month with 10% weekly water changes (probably just with RO water) and see where we are at that point. The RO water tests at PH6, and the KH and GH in the tank could come down as they are at the upper limits for Caridina shrimps! There are only about 10 very small snails in there at this point, but they seem to be doing well enough.
    • sdlTBfanUK
      I believe these to be very rare in Australia so you may even consider making it a longer term plan and produce your own by starting with the best CRS you can get as that is where the pure lines started! Depends how patient and interested in the project you are, but would save money as well? If I recall correctly it takes from 8 generations of selective breeding? They sell them at micro aquatic shop but do not ship to Western Australia, but that means they are available in Australia. https://microaquaticshop.com.au/products/pure-red-line-grade-ss-shrimp Good luck and just maybe smeone on here may point you in the right direction or be able to supply you with some.
×
×
  • Create New...