Jump to content

Bio pro canister


ineke

Recommended Posts

  • HOF Member

Has anyone used the bio pro canisters with uv lights? I am looking for a canister to run on my 200 litre tank and unfortunately don't have the budget for a high end canister. I have sent an email to one of our sponsors but until I get an answer I am just looking at a 1200lph canister. The bio pro has a 12 month warranty and seems to have good specs but its not a brand I know anything about.

Link to comment
Share on other sites

Instead of that one for that price I would go with the sunsun (also has like 3-4 other names) reviews are good, especially for that price range. Look on you tube for reviews.

Link to comment
Share on other sites

Unless you're in a rush(which I know is a silly question, lol) you might want to wait for one of Ben's "Deal of the day" specials, last time he had Eheim canisters up I think he did 2215's for $119 & 2217's for $149. :encouragement:

Link to comment
Share on other sites

  • HOF Member

I need to have it up and running/cycled before we go away in July and I thought adding a UV light might help. I will read the specs on the ones you just mentioned plus I am still waiting for an answer from AOA about recommended sizes and prices- hopefully I will get a reply soon:encouragement:

Link to comment
Share on other sites

  • HOF Member

Just checked the LPH and if I get a chiller that runs at 1200 LPH then neither of these canisters are big enough. the 2217 is rated at 1000 LPH. Please correct me if i'm wrong as I don't want to buy the wrong canister now and end up having to get another one when I finally get the chiller. The tank holds 210 litres empty so about 190-200 litres with substrate etc. I really would like a fluval G 3 but that's out of my budget- damn budgets!!!!.

Link to comment
Share on other sites

You can always have a lower LPH than the recommended for a chiller, increases the contact time & effectiveness. :D

Also, BB is selling his extra G3 at the moment, so maybe hit him up about it. :encouragement:

Link to comment
Share on other sites

  • HOF Member

Thanks Squiggs that helps as I was getting a bit confused there for a bit - I know thats not hard for me!

Link to comment
Share on other sites

  • HOF Member

Also' date=' BB is selling his extra G3 at the moment, so maybe hit him up about it. :encouragement:[/quote']

I have sent him a PM thanks but I expect it will still be a bit much they are not cheap filter.

Link to comment
Share on other sites

Unless you're in a rush(which I know is a silly question' date=' lol) you might want to wait for one of Ben's "Deal of the day" specials, last time he had Eheim canisters up I think he did 2215's for $119 & 2217's for $149. :encouragement:[/quote']

Wow!! Did they include taps and media?

Link to comment
Share on other sites

Just checked the LPH and if I get a chiller that runs at 1200 LPH then neither of these canisters are big enough. the 2217 is rated at 1000 LPH. Please correct me if i'm wrong as I don't want to buy the wrong canister now and end up having to get another one when I finally get the chiller. The tank holds 210 litres empty so about 190-200 litres with substrate etc. I really would like a fluval G 3 but that's out of my budget- damn budgets!!!!.

G3 quite small media amount compared to 2217. And the flow rate is only 700lph. A 2217 with a 18w UV light cost less than a G3 I think. Could be wrong though.

Link to comment
Share on other sites

Wow!! Did they include taps and media?

Not sure, whatever comes in the normal box for the Eheims. :encouragement:

Link to comment
Share on other sites

  • HOF Member
G3 quite small media amount compared to 2217. And the flow rate is only 700lph. A 2217 with a 18w UV light cost less than a G3 I think. Could be wrong though.

thanks Shrimpstan I better have another read of the specs -it may have been the G4 that was recommended to me- told you I'm easily confused :)

Link to comment
Share on other sites

  • HOF Member

OK there is no G4 so the G3 is rated for my tank but it was probably the G6 that was recommended -I need to speak to Eshrimp- but that is way out of my price range. Back to checking out some others!

Link to comment
Share on other sites

For the price you are looking at cant go past the sunsun many many good reviews...best for its price. If you put good porous filter media in it then it will do as good a job as any other filter.

Link to comment
Share on other sites

  • HOF Member

I've been looking for it Chi but can't seem to find any actually for sale unless under different name. will try again.

Link to comment
Share on other sites

yeah they go under different names depending on country...sunsun, pro aqua, aqua top, grech, etc......

Link to comment
Share on other sites

  • HOF Member

Thanks Chi you helped me pick out a filter with everything I wanted including a UV light within my budget. Your help is very much appreciated.

Link to comment
Share on other sites

I would love a good high end canister or ten but having said that I use the Pro Aqua ones, there are some other equivalent ones... You can get 1000LPH for under $100 and I mines still running after 3 years.

Link to comment
Share on other sites

No probs ineke, glad to help. The most important aspects of a filter is the flow lph, the amount of good bacteria (media) it can house, that the water flows through the proper media, mechanical-(chemical if required)-biological not just have the water flow in the top and pumped back out from the top of canister...as long as the filter can do this and with the proper filter media then you're good to go.

Link to comment
Share on other sites

  • HOF Member
I would love a good high end canister or ten but having said that I use the Pro Aqua ones' date=' there are some other equivalent ones... You can get 1000LPH for under $100 and I mines still running after 3 years.[/quote']

thanks for that. I have just ordered the Pro Aqua 1500 LPH. With UV light . Glad to hear you are happy with yours . It is nice to be able to get the high end canisters but sometimes money just doesn't go that far.

Link to comment
Share on other sites

No worries, I have the 1500lph one too. I am going to buy one or two of the 2000lph ones for my main planted tank once its ready.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Join Our Community!

    Register today, ask questions and share your shrimp and fish tank experiences with us!

  • Must Read SKF Articles

  • Posts

    • sdlTBfanUK
      Thats a great photo, beautiful blue bolt, I hope it survived the molt without dropping the eggs! I think I can just about see some black dots (eyes) on the central egg but can't be 100% sure. I used to (and plan to again) do weekly water change of 10-15% but if you do too large or quick (not drip in new water) that would likely trigger a molt. What KH are they in, my new setup is sitting at (and refusing to budge) KH 3 and PH 7.5 so I may have to settle for neocaridina shrimp this time as opposed to the caridina I want, though not looking/deciding just yet, give the tank a bit more of a run in! Tap water here starts at kH 14, tds 320, when filtered goes to KH 0 and PH 6 but when put in the tank keeps going to KH3 and PH 7.5 despite 3 x 50% water changes???? You may be at 'maximum capacity' with only 20L tank especially if the tank is a cube type rather than shallow type?
    • beanbag
      Right now this tank only has blue bolts and golden bee (red bolts?).  The eggs start off all brown, but at the end, I notice that some are kind of a clear pink-ish color.  So I don't know if that is the egg color of dud or golden bee.  Picture of shrimp only about half hour before molting. The water is always RO + remineralizer, so it should be ok. The tank seems to still be on a "good streak" ever since I started the regimen of weekly water change, monthly gravel vac and plant trim.  The point being to keep the amount of waste low and removing moss / floating plants so that the nitrates go towards growing algae.  At one point, I had three berried females, but only netted about half dozen babies by the end, due to this early molting problem.  There might be about 30-40 shrimp total in 5 gallons, but still very few full-sized adults.
    • ngoomie
      Alright, I've done a bit more research on gentian violet's cancer-causing potential but I haven't yet done research on malachite green's to compare. But from reading the California propositon 65 document about GV (North Americans incl. some Canadians will recognize this as the law that causes some products they buy to be labelled with "known to the state of California to cause cancer", including the exact product I bought) it seems that the risk of cancer is related to internal use, either injection or ingestion. Speaking of ingestion, I think GV bans mainly relate to its use in treating fish/shrimp/etc. which are intended for human consumption, because of the above. And in countries where GV isn't banned for this purpose, it does seem to get used on various species of shrimp without causing any issue for the shrimp themselves (at least enough so for shrimp farming purposes). See the following: In February, the FDA Began Rejecting Imported Shrimp for Gentian Violet and Chloramphenicol (2022 article by Southern Shrimp Alliance) FDA Starts New Calendar Year by Refusing Antibiotic-Contaminated Shrimp from Three BAP-Certified Indian Processors and Adding a BAP-Certified Vietnamese Processor to Import Alert (2024 article by Southern Shrimp Alliance) Southern Shrimp Alliance and some other organizations have tons of other articles in this vein, but I'd be here for a while and would end up writing an absolutely massive post if I were to link every instance I found of articles mentioning shrimp shipments with gentian violet and/or leucogentian violet registering as contaminants. That being said, I know shrimp farmed for consumption and dwarf shrimp are often somewhat distantly related (in fact, the one time a shrimp's species name is listed that I can see, it's the prawn sp. Macrobrachium rosenbergii, who at best occupies the same infraorder as Neocaridina davidi but nothing nearer), but this at least gives a slightly better way of guessing whether it will be safe for aquarium dwarf shrimp or not than my bladder snail anecdote from the OP.
    • sdlTBfanUK
      I would hazard a guess that perhaps those eggs were unfertilized and thereby unviable? Did the eggs change colour, usually yellow to grey as the yolks used up, or any eyes in the eggs. Is your water ok, using RO remineralised and the parameters in range, as I have heard others say that if the water isn't good it can 'force' a molt? How is it going overall, do you have a good size colony in the tank, you may have reached 'maximum occupancy' as a tank can only support so many occupants.
    • beanbag
      Hello folks,  The current problem I am having is that my Taiwan bee shrimp are molting before all their eggs have hatched.  Often the shrimp keep the eggs for 40+ days.  During that time, they lose about half or so, either due to dropping or duds or whatever.  Shortly before molting they look to have about a dozen left, and then they molt with about half a dozen eggs still on the shell.  Then the other shirmp will come and eat the shell.  These last few times, I have been getting around 0-3 surviving babies per batch.  I figure I can make the eggs hatch faster by raising the water temperature more (currently around 68F, which is already a few degrees higher than I used to keep it) or make the shrimp grow slower by feeding them less (protein).  Currently I feed Shrimp King complete every other day, and also a small dab of Shrimp Fit alternating days.  Maybe I can start alternating with more vegetable food like mulberry?  or just decrease the amount of food?
×
×
  • Create New...