Jump to content

Newb here.


Clutchology

Recommended Posts

I initially started off with a yabby tank a year ago, but got sick of them killing each other. Started looking into shrimps recently and just got hooked since.

However that seems to be the start of my frustration. My 70L tank isn't completely cycled, but did reuse the previous filter media with yabbies.

My stats are

pH 7.7

kH 7

gH 11

ammonia 0-0.25ppm

nitrite 0ppm

nitrate 5ppm

phosphate 5ppm (was >10ppm before I inserted phosphate removal pads)

temp 25c with Eheim heater

java moss, java fern, 2 ambulia and a live rock. ~3 hrs of light a day.

Leaf zone fert once a week.

Started off with 11 shrimps, 6 died over the course of the month, mostly smaller/male shrimps. To complicate things I found 2 dragonfly larvae which I removed yesterday, and also 2 snail like bugs on my rock I also removed yesterday.

The 5 shrimps left are very inactive, and don't get excited with food anymore.

ive been trying water changes to be more frequent 20-30% every 3 days but nothing has changed. Is it still because of my high phosphates? Anything else I can look at?

Link to comment
Share on other sites

Welcome to SKF. Presume the shrimps you're referring to are cherry shrimps? Although PH, KH & GH is all within the acceptable WP, I'd lowered them, and check your TDS. Good to also know your tap WP.

Link to comment
Share on other sites

Welcome clutch!! Ask lots of questions and post plenty of pics where you can!!

Link to comment
Share on other sites

Welcome to the forum, definitely the best place to be to learn about shrimp, always someone here only too willing to answer any questions & we don't believe in dumb questions here, so ask away! I'd have to agree with BB, your WP(water parameters) look acceptable for cherries & definitely have a look at your TDS(total dissolved solids), you'll need to invest a couple of dollars to get a TDS pen, they're pretty cheap on eBay, you want it to be lower than about 200ppm. Hope you have as much fun here as wel do! :victorious:

Link to comment
Share on other sites

Thanks for the replies

Tap pH: 7.8

kH 7

GH:12

My TDS meter is en route and should be here early this week.

You guys reckon my phosphate level is acceptable?

Phosphate in tap is 0-0.25

Link to comment
Share on other sites

Hey mate, welcome to SKF. You might need to consider converting to RO (Reverse Osmosis) water remineralised using SaltyShrimp (or similar) shrimp minerals. It is more expensive but may give you better success and less frustration in the long run rather than trying to lower pH and high TDS using other methods.

Is the phosphate coming in from the plant fertiliser?

Link to comment
Share on other sites

Oops yes it's cherry red shrimps I'm referring to.

I'm only using API leaf zone as a fertiliser. Doesn't seem to say it has phosphates. LFS also said it should be safe to use.

I also read that phosphate and nitrates are inversely related such that a low nitrates usually means high phosphate. Does it mean I don't have enough shrimps in there to produce nitrates creating an imbalanced water parameters?

Though I'm quite hesitant to put in more shrimps till the existing ones appear healthier.

Link to comment
Share on other sites

API leaf zone only contain iron and potash, no nitrogen or phosphorus (NPK).

You mention you have java moss, java fern and a live rock.

Java Fern and moss does not need much, if any ferts, in a shrimp tank.

And what is a live rock?

I know what it is in a Marine tank. But not in a fresh water tank for cherry shrimps.

This could be your source of problems, if the rock is unsuitable for a shrimp tank.

A high phosphate could be from too much decaying matter or too much food.

What are you feeding your shrimps? Try some fresh food like leaves.

Link to comment
Share on other sites

I assumed a suitable rock that I can put into the aquarium was a live rock? sorry guess i was wrong (newb lol). It was just purchased from my LFS to hook my java fern onto.

I usually just feed 2 pellets of crab cuisine every 2nd night normally, which they were actively eating initially. I tried blanched kale later on but they didn't even touch it. Now they only eat 1 pellet and it takes them over 3-4 hours to finish.

How do i check if my problem is coming from the rock? As i did see 2 snail-like parasites hanging onto it..

Link to comment
Share on other sites

It seems that RO is the way to go unless I want to have to play around with peat or indian almond leaves.

This hobby is just getting more and more expensive ;(

Link to comment
Share on other sites

I see. It's not a "live rock" then. It's just a rock.

Might be helpful if you can find out what type of rock it is from your LFS.

Alternatively you could do the vinegar test on it to see if it is reactive.

If it takes them 3-4 hours to finish one pellet of food, then hopefully you are cutting back to 1 pellet as well. Especially until your beneficial bacteria numbers increase.

As BlueBolts has mentioned, it's a good idea to try lowering your KH & GH.

Your tap water parameters doesn't help the situation, as it seems to be coming out at those high readings.

Your ammonia source could very likely be from the tap water as well. Chloramine used in municipal water is made up of Chlorine + Ammonia. What are you using as a water conditioner/dechlorinator ?

RO water plus remineralising products like Salty Shrimp or MOSURA Mineral Plus Ultra really is the best option.

Alternatively collect rainwater and remineralising with Salty Shrimp or MOSURA Mineral Plus Ultra.

Link to comment
Share on other sites

The ammonia level measures exactly the same in my tap water and in the aquarium both are 0-0.25ppm. I'm currently using API quick start which says it limits ammonia and contains nitrifying bacteria and API stress coat+ which removes chlorine. I put both into the water I use to do WCs and not the directly into the aquarium.

I'll read up on the vinegar test with the rock.

Appreciate all the replies by the way.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Join Our Community!

    Register today, ask questions and share your shrimp and fish tank experiences with us!

  • Must Read SKF Articles

  • Posts

    • sdlTBfanUK
      Time for another update! The PH this morning is 6 and KH 0-1 (you can't measure zero obviously). I plan to check everything tomorrow and then a water change on satuday. At the moment the TDS is 190 which should drop to 170 after a water change and then 150ish after the following/next weeks water change. Last time I checked GH it was 6, but again I will do ALL the tests tomorrow. I had to resort to using a PH/KH- product (AQUACID) to get to where these parameters are now but as the water I use has PH6, GH0 and KH0 I assume/hope I won't need to use that from here on, but will see if the parameters stay stable for the next week and have a PH alert disc in the tank which should indicate any significant change. I don't like using these sort of products as a general rule and wouldn't if there were any shrimps in situ and that product has raised the TDS at about .5TDS per drop. I may well order some blue bolts towards the end of next week (the road to the house will be closed for a month from 3rd June so it is next week or wait another 6 weeks) and see how that goes. I plan to drip acclimate them overnight this time so as to not rush that as it shouldn't get cold indoors overnight anyway this time of year. This all depends on the tank parameters staying stable for the next week (aside from the mentioned TDS adjustments with the water changes), though the GH  may drop a tiny bit with using just RO to reduce the TDS but that is fine, and even could be a bonus. I did manage to find some nice floating plant that I had before (good old ebay), and will try and get a photo of that at some point to attach, Azolla red I think it is called? Anyway, keeping my fingers crossed for now but all appears to be going well at this point! Snails seem to be doing well at least.   
    • beanbag
      That shrimp itself survived the molt just fine, but left about half dozen eggs still in the shell. I haven't measured KH in a really long time, but assume it is zero since I don't have any rocks besides a few small pieces of lava rock.  Maybe you have unwanted rocks in your tank?  My tank is the "long" style which I really like because I have a HMF on one end, and a pump outlet spout that shoots water all the way to the other end.  I have no idea how many shimp it can support because I don't really understand waste management in a tank.  Shrimp poop eventually turns into mulm, but then what?
    • sdlTBfanUK
      As at time of this post the SL Aqua is available from this UK website, https://gbeeshrimp.co.uk/product/z1/
    • sdlTBfanUK
      Just in case someone may be looking for the SL Aqua it is available from this UK website at time of this post, https://gbeeshrimp.co.uk/product/z1/  
    • sdlTBfanUK
      Thats a great photo, beautiful blue bolt, I hope it survived the molt without dropping the eggs! I think I can just about see some black dots (eyes) on the central egg but can't be 100% sure. I used to (and plan to again) do weekly water change of 10-15% but if you do too large or quick (not drip in new water) that would likely trigger a molt. What KH are they in, my new setup is sitting at (and refusing to budge) KH 3 and PH 7.5 so I may have to settle for neocaridina shrimp this time as opposed to the caridina I want, though not looking/deciding just yet, give the tank a bit more of a run in! Tap water here starts at kH 14, tds 320, when filtered goes to KH 0 and PH 6 but when put in the tank keeps going to KH3 and PH 7.5 despite 3 x 50% water changes???? You may be at 'maximum capacity' with only 20L tank especially if the tank is a cube type rather than shallow type?
×
×
  • Create New...