Jump to content

Low kh and high gh??


Ronskitz

Recommended Posts

My params are:

kh 6

gh 25

ph 8

amm 0

nitri 0

nitra 10-15 ppm

temp 23

I tested the water coz my little guys where hiding a lot so i wondered why. I have just started using ro water with salty shrimp to remineralize am i doing something wrong cheers

Ron

Link to comment
Share on other sites

Woah!! Is that in dGH or ppm, what test kit are you using? What shrimp are you keeping? For cherries you want a GH 4-14 & KH 0-10 & for crystals you want GH 4-6 & KH 0-2. Are you able to test your TDS? You might be over mineralizing the water with the SaltyShrimp but I can't be certain without knowing the TDS :dejection:

edit: I just re-read your post & I'm guessing with the ph that high you have cherries, might want to bring that down to around 7.2 - 7.4 as well.

Link to comment
Share on other sites

Yeah iv been working on my ph down aswell but struggling :( im using api test kit and it (painstakingly) took 25 drops. Iv just realised iv gotta convert it haha still learning this test. But its still extremely high

Link to comment
Share on other sites

Yes, it does. Over mineralising with Salty Shrimp will raise GH an KH.

Some straight RO water every water change should reduce it slowly.

Link to comment
Share on other sites

Yes it would & it has, before you started adding minerals both GH & KH should have been zero. Adding minerals has raised them both & it is normal for the GH to be higher than the KH but not to that degree. I have a feeling that your KH is what is keeping your PH so high as well.

The API test kits are great cause 1 drop = 1 degree of hardness, i.e. 1drop =1dGH of both GH & KH, there's no need to convert it to ppm.

There are a few ways to reduce your hardness, like peat moss, driftwood & IAL, but I would do water changes with pure RO water to dilute the levels down to where you want it. :encouragement:

Link to comment
Share on other sites

  • 1 month later...

Ok guys iv managed to get params right now one last additional question iv got a 10 litre water container that i buy my ro in can i put salty shrimp staight into the container? The reason i ask is i have been told the it slowly depletes over time? Coz it would be a hell of a lot easier that way haha

Link to comment
Share on other sites

I store my RO water in air tight drums & mix it up just before I do a waterchange. :victorious:

Link to comment
Share on other sites

Hi squig Yeah thats what i have been donig but it would be heaps easier if i could do it while in storage

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Join Our Community!

    Register today, ask questions and share your shrimp and fish tank experiences with us!

  • Must Read SKF Articles

  • Posts

    • sdlTBfanUK
      https://www.youtube.com/watch?v=58BrDSEY8KE  
    • beanbag
      One interesting thing he mentioned was "Bacteria pressure", which I guess just means number of bacteria around.  Yet I see all these other videos from shrimpkeepers bragging about how much bacteria their filtering system holds. Also interesting is no mention of using anti-biotics to treat bacterial infection.  I think that has fallen out of favor recently.
    • sdlTBfanUK
    • sdlTBfanUK
      It has been a few weeks now and I have done a couple of large water changes. I tested the water parameters this morning, GH6 and KH2, TDS 140 and PH 7.5. Obviously the PH is off but there isn't anything in the tank that should cause the PH to rise to this figure so I will just run the tank for another month with 10% weekly water changes (probably just with RO water) and see where we are at that point. The RO water tests at PH6, and the KH and GH in the tank could come down as they are at the upper limits for Caridina shrimps! There are only about 10 very small snails in there at this point, but they seem to be doing well enough.
    • sdlTBfanUK
      I believe these to be very rare in Australia so you may even consider making it a longer term plan and produce your own by starting with the best CRS you can get as that is where the pure lines started! Depends how patient and interested in the project you are, but would save money as well? If I recall correctly it takes from 8 generations of selective breeding? They sell them at micro aquatic shop but do not ship to Western Australia, but that means they are available in Australia. https://microaquaticshop.com.au/products/pure-red-line-grade-ss-shrimp Good luck and just maybe smeone on here may point you in the right direction or be able to supply you with some.
×
×
  • Create New...