Jump to content

striving 4 PRL


Recommended Posts

So here is the story so far, blah blah blah.

After keeping and breeding shrimps for about one years now, i've decide to just keep and breed Crs. Yes I am striving 4 PRL. I just can't go past a deep solid red and white of these shrimps.

My project will be very simple. I will have one selective breeding tank and one display tank (not going to stop them from breeding in here off course).

This will be my display tank.

6FDA46C9-FDB8-47B9-8253-15114DE88D87-4501-000005C660CCFD58.jpg6E892A96-2E45-4374-9D14-791451CC4BD8-4501-000005C67180A84C.jpg

I also have some native shrimps in this tank as well, include DAS, DRNS and glass shrimps as well as a few yellows.

Here is my selective breeding tank, (not much of a tank) but it is doing it job.

BEDB932B-1A4C-4200-A9F2-521447C37185-3837-000004BF85DA4CCB.jpg

As you can see there is 3 sections to the tank. Smallest section will contain one 1 sss male to a few sss/white female. Second Section will contain one SSS male and a few selective SS and A/S female. The largest section will contain all the solids colour Crs A grade female with SS or above female.

My aim with the selective breeding tank is to only breed SS and above male with selected female. Hence I will try to only have A grade female only and all male in this tank will be SS and above.

Hope all that make sense. Please don't hesitate to give me feedback. Negative or positive, all is welcome.

Anythings else that I've miss, please ask.

Cheers

Link to comment
Share on other sites

My understanding of PRL is that there are no Golden (or Snowwhite?) genes only CRS .... so you need to do crosses with Golden Bees to establish your breeding stock does not carry these genes.

I am only parroting what I have read and have no experience of this myself!

Cheers

Greg

Link to comment
Share on other sites

PRL are nice, there is already some nice stock from pure lines here. I have some, they're great.

Link to comment
Share on other sites

My understanding of PRL is that there are no Golden (or Snowwhite?) genes only CRS .... so you need to do crosses with Golden Bees to establish your breeding stock does not carry these genes.

I am only parroting what I have read and have no experience of this myself!

Cheers

Greg

Thank you for the head up. I'm working on it.

Link to comment
Share on other sites

Fantastic....the more people focus in achieving amazing quality shrimps the better. I've seen a Benibachi PRL overseas, and it was truly amazing !!!! Still expensive at AUD$800 in Thailand, so quality still cost lots of $$$....be great to start a thread of the best quality stock we all have...perhaps once I get me 1st photography lesson on Saturday, I'll post some pics !

Link to comment
Share on other sites

PRL are nice' date=' there is already some nice stock from pure lines here. I have some, they're great.[/quote']

Very nice Matt, love to see pic if you don't mind.

Any chance you can point me to where you sources these PRL? Please pm me the detail.

Thank you

Link to comment
Share on other sites

Fantastic....the more people focus in achieving amazing quality shrimps the better. I've seen a Benibachi PRL overseas' date=' and it was truly amazing !!!! Still expensive at AUD$800 in Thailand, so quality still cost lots of $$$....be great to start a thread of the best quality stock we all have...perhaps once I get me 1st photography lesson on Saturday, I'll post some pics ![/quote']

Since I love all shrimps and because resources are limited i have to choice but to just concentrate on one like. I really like the Crs from the start, hence I've decide to just concentrate on purely Crs.

:)

Link to comment
Share on other sites

I've clear out most of mosses and leave in this section ready for some of my sss Crs.

AEBCF351-A241-4DBB-A3F4-5DBED0AF5B75-5588-0000067A2C69108A.jpg

This making viewing of the shrimp easy.

Link to comment
Share on other sites

Good luck Kev :)

I hope you have success with making 'PRL' and can share with us photos and shrimps :cheerful:

Thank you mate, I'll try to take pic of all the shrimps I'll be putting into this section.

Link to comment
Share on other sites

good luck with this project mate, will be very interesting to see how it turns out.

but as was mentioned if you are mixing gold or white with the crs then it wont be PRL.

there is a great article here about starting a PRL program.

http://www.silaneshrimp.com/

Link to comment
Share on other sites

nice, i like what you have done with the moss wall, will look great once it grows out!

Link to comment
Share on other sites

nice' date=' i like what you have done with the moss wall, will look great once it grows out![/quote']

Thank you mate.

Added a few shrimps this evening. Sorry they are not the best shoot (iPhone), but you get the idea.

78E16C33-7EA3-4FFC-AE6D-9DEBBD61AC6B-6957-000007E6136D417D.jpg78A0E7A8-C055-435C-BDF6-31DE452B7540-6957-000007E6183FF7DF.jpg758E9BDA-3799-4EB5-96BC-34DA812B995C-6957-000007E61D337153.jpg

Cheers.

Link to comment
Share on other sites

I think those shrimp will cause you to lose your PRL hopes Kev, correct Me if I'm wrong, but arent the mosura type patterns achieved by mixing golden with CRS to achieve SSS faster? If you want prl you need to keep your tank free of this genetic impurity. I'll get into that silane article when I get home to further my knowledge.

Link to comment
Share on other sites

Mosura definitely has the SW/GB gene...best to buy from a reputable breeder that has F2/3+, with assurance they havent been X with SW/GB, loo for PRL characteristics (i.e. red legs, strong/deep colouring...), and not worry about pattern (i.e. SSS....), and start your PRL project on the right foot ....

Link to comment
Share on other sites

Dammmmmm it!!!!!!

I've already spend all my free saving on all these SSS. What option you guys think I should do now?

Do I try to sources Crs that don't carry gold/sw gene or do I continues to breed my existing stock and putting all the nice deep Crs separate for PRL breed only.

Keeping on mind I'm finding it really hard to sources really nice deep red and white Crs with red legs.

Does anyone have any they are willing to part with? Please pm me.

Link to comment
Share on other sites

Don't worry Kev. Just breed the SW/GB gene out of your current stock. Remember patience is the key to shrimp keeping. Might take a couple of years but it's worth it.

Link to comment
Share on other sites

Just added a background to my Crs only tank. I'm hoping to use this tank to keep Crs only.

29380CE2-64CF-4CFC-9104-573C0E334F0D-2254-000002B51DC42E89.jpg

Mean while in the breeding tank I've add this SSS Crs.

43DCACE3-6A5F-4EA1-B94C-A418108C7610-2254-000002B528348AED.jpgFFB24069-8794-43A0-8FBC-62248A517A6E-2254-000002B52318B48F.jpg

With a few generation down the track I aam hoping to get deep colour red and white.

Link to comment
Share on other sites

don't worry too much kev, the sss are still amazing colours and it's not like you can't go for line breeding the mosura pattern crs with white legs ;) another amazing type of shrimp! like bluebolts said, just work on the others that you have. cause pure lines are all about line breeding the stocks that you have. keep us updated

Link to comment
Share on other sites

don't worry too much kev' date=' the sss are still amazing colours and it's not like you can't go for line breeding the mosura pattern crs with white legs ;) another amazing type of shrimp! like bluebolts said, just work on the others that you have. cause pure lines are all about line breeding the stocks that you have. keep us updated[/quote']

Will do Gbang.

I'm in the process of selling all my CBS ATM to just concentrate on crs :)

Link to comment
Share on other sites

I've sold most of my CBS and only a few higher grade left.

Woke up to this

40D0DAA9-6AB7-47D8-A758-B9FD0ACD8C67-355-000000839FD034B5.jpg

Finger cross I can get some nice solid colour Crs out of these.

I've manage to select a few very nice solid colour Crs for the project. Will upload the pic once I have taken better pic.

Link to comment
Share on other sites

yeah that is awesome, i wish my high grades would get breeding ;)

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Join Our Community!

    Register today, ask questions and share your shrimp and fish tank experiences with us!

  • Must Read SKF Articles

  • Posts

    • sdlTBfanUK
      Time for another update! The PH this morning is 6 and KH 0-1 (you can't measure zero obviously). I plan to check everything tomorrow and then a water change on satuday. At the moment the TDS is 190 which should drop to 170 after a water change and then 150ish after the following/next weeks water change. Last time I checked GH it was 6, but again I will do ALL the tests tomorrow. I had to resort to using a PH/KH- product (AQUACID) to get to where these parameters are now but as the water I use has PH6, GH0 and KH0 I assume/hope I won't need to use that from here on, but will see if the parameters stay stable for the next week and have a PH alert disc in the tank which should indicate any significant change. I don't like using these sort of products as a general rule and wouldn't if there were any shrimps in situ and that product has raised the TDS at about .5TDS per drop. I may well order some blue bolts towards the end of next week (the road to the house will be closed for a month from 3rd June so it is next week or wait another 6 weeks) and see how that goes. I plan to drip acclimate them overnight this time so as to not rush that as it shouldn't get cold indoors overnight anyway this time of year. This all depends on the tank parameters staying stable for the next week (aside from the mentioned TDS adjustments with the water changes), though the GH  may drop a tiny bit with using just RO to reduce the TDS but that is fine, and even could be a bonus. I did manage to find some nice floating plant that I had before (good old ebay), and will try and get a photo of that at some point to attach, Azolla red I think it is called? Anyway, keeping my fingers crossed for now but all appears to be going well at this point! Snails seem to be doing well at least.   
    • beanbag
      That shrimp itself survived the molt just fine, but left about half dozen eggs still in the shell. I haven't measured KH in a really long time, but assume it is zero since I don't have any rocks besides a few small pieces of lava rock.  Maybe you have unwanted rocks in your tank?  My tank is the "long" style which I really like because I have a HMF on one end, and a pump outlet spout that shoots water all the way to the other end.  I have no idea how many shimp it can support because I don't really understand waste management in a tank.  Shrimp poop eventually turns into mulm, but then what?
    • sdlTBfanUK
      As at time of this post the SL Aqua is available from this UK website, https://gbeeshrimp.co.uk/product/z1/
    • sdlTBfanUK
      Just in case someone may be looking for the SL Aqua it is available from this UK website at time of this post, https://gbeeshrimp.co.uk/product/z1/  
    • sdlTBfanUK
      Thats a great photo, beautiful blue bolt, I hope it survived the molt without dropping the eggs! I think I can just about see some black dots (eyes) on the central egg but can't be 100% sure. I used to (and plan to again) do weekly water change of 10-15% but if you do too large or quick (not drip in new water) that would likely trigger a molt. What KH are they in, my new setup is sitting at (and refusing to budge) KH 3 and PH 7.5 so I may have to settle for neocaridina shrimp this time as opposed to the caridina I want, though not looking/deciding just yet, give the tank a bit more of a run in! Tap water here starts at kH 14, tds 320, when filtered goes to KH 0 and PH 6 but when put in the tank keeps going to KH3 and PH 7.5 despite 3 x 50% water changes???? You may be at 'maximum capacity' with only 20L tank especially if the tank is a cube type rather than shallow type?
×
×
  • Create New...