Jump to content

New products, suggestions.


sajica

Recommended Posts

Just out of curiosity. I'd thought I'd ask a few of you online shoppers some of the stuff that you're looking for at the moment.

I'm currently searching for a DECENT thermostat unit to run with my cooling fans...

I've come across this particular one.

http://www.amazingamazon.com.au/eco-tech-dimming-reptile-thermostat.html

I also came across these external filters

[ATTACH=CONFIG]1870[/ATTACH]

http://www.exo-terra.com/en/products/turtle_filter_fx-200.php

And these moss balls

[ATTACH=CONFIG]1869[/ATTACH]

http://www.exo-terra.com/en/products/moss_ball.php

So there's 2 points to this thread.. What kind of thermostat do you suggest I use to turn off at a predetermined point for my cooling fans. Assuming the one I showed you feel is adequate. IS it something you'd be interested in buying off the AOS online store or any of the above products?

For those interested I can get prices/ rough prices if you like or arrange a group buy. I'm not sure what I've gotten myself into?

Chris.

post-538-139909859028_thumb.jpg

post-538-139909859031_thumb.jpg

Link to comment
Share on other sites

I personally have considered these thermostats and timer combos, the only reason I have never jumped on them was that it would be redundant to use them with chillers, but if your cooling with fans I think these would be a must have. Plus for me anything with blue led displays attracts me like a moth to fire lol.

Those canister filters I know are suppose to be really good, a friend has one and he loves it.

Link to comment
Share on other sites

I personally have considered these thermostats and timer combos' date=' the only reason I have never jumped on them was that it would be redundant to use them with chillers, but if your cooling with fans I think these would be a must have. Plus for me anything with blue led displays attracts me like a moth to fire lol.Those canister filters I know are suppose to be really good, a friend has one and he loves it.[/quote']I'm a sucker for blue light up things... Throw a blue LED on something and I'm sold :) I was noticing the other day with my fans on during the dsay I could have a temperature of around 25/26 degrees during the day. If I leave the fans on night, that temp could drop to 22 degrees. Granted there are natural temperature fluctuations in nature during the day, I thought I'd try to rule that out and kind of automate my system a little more.I'm not sure how much they will be as they're a "Hagen" branded product, so expect them to be more dear than any of the whoflungdung/ Yumcha Chinese versions on ebay. There may also be rebadged Exo Terra ones for aquariums. I'll have a look later today if I can on pricing. Hagen has a great habit of rebading their products, they have their Fluval internal filters labeled as turtle filters..No one interested in the moss balls?
Link to comment
Share on other sites

I had a look at the catalogue price for the cannisters. Comparing them to SIMILAR models on ebay. You can get them ordered and delivered for LESS than the purchase price of the Exoterra unit.

Out of curiosity, what ball park would you be happy/ feel comfortable paying?

Link to comment
Share on other sites

Just out of curiosity. I'd thought I'd ask a few of you online shoppers some of the stuff that you're looking for at the moment.

Hi there Chris

I am looking @ Eheim 2213 & 2215 for a 30x30x35 cm cube...Which one would be sufficent and whether to go for the bio-filter (upgrade) and what price roughly r they...Cheers CJ

Link to comment
Share on other sites

I can't recall the price, but the 2213 will be more than enough for that size. I'm not sure what bio filter upgrade you're refering to, as they come setup with media (Efimech, blue sponge, Efisubstrat, white filter pad and carbon pad)

I'll get you a price tomorrow when I'm at work :)

Link to comment
Share on other sites

I can't recall the price' date=' but the 2213 will be more than enough for that size. I'm not sure what bio filter upgrade you're refering to, as they come setup with media (Efimech, blue sponge, Efisubstrat, white filter pad and carbon pad)

I'll get you a price tomorrow when I'm at work :)[/quote']

Thanks Chris...With the Eheim canisters there are 2213, 2215 & 2217 classic (normal) ... & the 2213,2215 & 2217 with bio-media...CJ

Link to comment
Share on other sites

The 2213 is $174. I've only heard of them being empty (parallel imported) or with media (legit import)

Chris/ sajica :)

Link to comment
Share on other sites

Yeah the moss balls look good & I'd definitely be interested in the temp sensor/switch, what sort of price would they be? :D

Link to comment
Share on other sites

The thermostat would be around $90 but if there was enough interest I could get that price down for a group buy

Link to comment
Share on other sites

Sounds good guys... I've tried to order 2 for myself from the local warehouse (In Perth) but they only had 1 in stock. I will play around with it, try it out and give my feedback on them. Apparently I may get it next Friday (with some of our other stock that is being freighted over). I personally won't order or stock anything that I think is crap, unless a customer wants it. I find it hard to sell a product from a moral point of view and personal point of view if it's something I wouldn't use myself or a product that I feel is landfill fodder.

I was hoping to give those thermostats a good play this weekend considering the incoming heatwave. Oh well

Thermostats

x1 Bluebolts

x1 Squiggle

Link to comment
Share on other sites

I have a thermostat unit I got from Hong Kong through an eBay seller.

$18 with free delivery.

http://www.ebay.com.au/itm/170876858550?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649

It runs my chiller and heater, my chiller is a little old and doesn't read the water temp very accurately. With this unit I put the temp sensor inside the tank. It can be calibrated easily to allow for accurate temp monitoring and you can set the threshold manually. Mine is set to allow .5 degrees fluctuation either way.

It is set at 26.5 degrees and the chiller cut in at 27 degrees, the heater cuts in a 26 degrees.

Link to comment
Share on other sites

I saw them, but it didn't look like they had all the cables you needed to plug and play. Someone was selling one all wired up by a sparky, but I was hoping for an off the shelf type unit.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Join Our Community!

    Register today, ask questions and share your shrimp and fish tank experiences with us!

  • Must Read SKF Articles

  • Posts

    • sdlTBfanUK
      Time for another update! The PH this morning is 6 and KH 0-1 (you can't measure zero obviously). I plan to check everything tomorrow and then a water change on satuday. At the moment the TDS is 190 which should drop to 170 after a water change and then 150ish after the following/next weeks water change. Last time I checked GH it was 6, but again I will do ALL the tests tomorrow. I had to resort to using a PH/KH- product (AQUACID) to get to where these parameters are now but as the water I use has PH6, GH0 and KH0 I assume/hope I won't need to use that from here on, but will see if the parameters stay stable for the next week and have a PH alert disc in the tank which should indicate any significant change. I don't like using these sort of products as a general rule and wouldn't if there were any shrimps in situ and that product has raised the TDS at about .5TDS per drop. I may well order some blue bolts towards the end of next week (the road to the house will be closed for a month from 3rd June so it is next week or wait another 6 weeks) and see how that goes. I plan to drip acclimate them overnight this time so as to not rush that as it shouldn't get cold indoors overnight anyway this time of year. This all depends on the tank parameters staying stable for the next week (aside from the mentioned TDS adjustments with the water changes), though the GH  may drop a tiny bit with using just RO to reduce the TDS but that is fine, and even could be a bonus. I did manage to find some nice floating plant that I had before (good old ebay), and will try and get a photo of that at some point to attach, Azolla red I think it is called? Anyway, keeping my fingers crossed for now but all appears to be going well at this point! Snails seem to be doing well at least.   
    • beanbag
      That shrimp itself survived the molt just fine, but left about half dozen eggs still in the shell. I haven't measured KH in a really long time, but assume it is zero since I don't have any rocks besides a few small pieces of lava rock.  Maybe you have unwanted rocks in your tank?  My tank is the "long" style which I really like because I have a HMF on one end, and a pump outlet spout that shoots water all the way to the other end.  I have no idea how many shimp it can support because I don't really understand waste management in a tank.  Shrimp poop eventually turns into mulm, but then what?
    • sdlTBfanUK
      As at time of this post the SL Aqua is available from this UK website, https://gbeeshrimp.co.uk/product/z1/
    • sdlTBfanUK
      Just in case someone may be looking for the SL Aqua it is available from this UK website at time of this post, https://gbeeshrimp.co.uk/product/z1/  
    • sdlTBfanUK
      Thats a great photo, beautiful blue bolt, I hope it survived the molt without dropping the eggs! I think I can just about see some black dots (eyes) on the central egg but can't be 100% sure. I used to (and plan to again) do weekly water change of 10-15% but if you do too large or quick (not drip in new water) that would likely trigger a molt. What KH are they in, my new setup is sitting at (and refusing to budge) KH 3 and PH 7.5 so I may have to settle for neocaridina shrimp this time as opposed to the caridina I want, though not looking/deciding just yet, give the tank a bit more of a run in! Tap water here starts at kH 14, tds 320, when filtered goes to KH 0 and PH 6 but when put in the tank keeps going to KH3 and PH 7.5 despite 3 x 50% water changes???? You may be at 'maximum capacity' with only 20L tank especially if the tank is a cube type rather than shallow type?
×
×
  • Create New...