Jump to content

Shrimp rack.


sjn5188

Recommended Posts

Hey im thinking about building a new shrimp rack i have done a quick drawing of the setup its 3 five foot tanks in total and a sump underneath. each tank will be divided into 5 sections. I'm going to either have each section drilled at the back or just one out at one end and allow water to pass through each divider. will also have sponges in each section and a 2000lhr pump running it. Your thoughts would be appreciated

shrimprack.png

Link to comment
Share on other sites

After running 2 5 footers on top of one another with a sump for a while now I have some possible things to think about.

If you have any issues with one of the tanks it is too hard to isolate it with only one stand pipe, I think you would be better drilling them all.

I seem to get weird flow patterns and some severe dead spots where crap builds up because of the flow through the dividers so I prefer a spray bar in each.

Also a 2000Lph pump may be a bit on the low side, by the time you account for the total head loss you could be looking at <1000 depending on how you plumb it.

Also by the time you add lights or whatever 15 cm is pretty small and I found it difficult to work sometimes with the 20+cm I have on mine. Especially if you put driftwood or anything in there.

Can't wait to see pics of this once its set up though. Its going to be amazing.

Link to comment
Share on other sites

I would like more space but my room is really low so thats maxed out as it is, so i guess i will have to deal with it. :(

Yeah i guess drilling all sections would be better. I was going to put an intake in each section no matter what. Its just in the dreaming/planning stages, getting prices on things first before its a go.

Link to comment
Share on other sites

Also by the time you add lights or whatever 15 cm is pretty small and I found it difficult to work sometimes with the 20+cm I have on mine. Especially if you put driftwood or anything in there.

Too true, the more space the better.15cm is definitely too small.

Link to comment
Share on other sites

I would like more space but my room is really low so thats maxed out as it is' date=' so i guess i will have to deal with it. :(

Yeah i guess drilling all sections would be better. I was going to put an intake in each section no matter what. Its just in the dreaming/planning stages, getting prices on things first before its a go.[/quote']

All good, ask as many questions as you can, I kinda wished I did before I set up my first rack as it isn't as good as I would like now.

Do you really need 15 sections running all the same water parameters? What about just using 2 5' tanks?

Link to comment
Share on other sites

Thanks for the drawing/sketch sjn5188....a overflow/spray bar on each tank is always a must for me..... It allows you to segregate each tank, by just turning off the outflow, dropping the water level just below the overflow, thus enabling only the air filter to work, or a separate cannister/overhang filter etc...to take over. In my breeding setup, I have a spare filter for emergencies to do just that.

Depending on your selective breeding plans, 15 divisions is a lot...but with the different variations of shrimps, it's never enough I guess. Having part of the tanks having the ability of having a different system would be great. Especially of this is the only breeding setup...if you have another, then that's ok....

The planning is as much fun as the build....but never as exciting as when the system is cycled, and the shrimps go in !

Link to comment
Share on other sites

Im also planning a similar thing, is it better to have 2 pumps in the sump one going into each tank or can the lines in 1 pump be divided to push water into each tank?

Link to comment
Share on other sites

Im also planning a similar thing' date=' is it better to have 2 pumps in the sump one going into each tank or can the lines in 1 pump be divided to push water into each tank?[/quote']

You can do both options. I'm going with one big pump and running a line up to the top tank across and down and across to the second tank with a tee piece and valve running into each section every section will have in in line and an out aswell. So if i wanted too I could seperate a section off from the rest.

Link to comment
Share on other sites

I use two pumps for my four tank rack . One pump runs from the sump through my cooler, The other is a pond pump that pumps water from the sump through a jabsco upright filter, to the top tank with branches coming from the main line to each tank carrying water to each tank through a submerged spray bar. Each tank is drilled and I have an overflow connected to a return line running opposite to the up line. I have filter material in the sump and it is also home to all my cherry culls.These pics might give you an idea.post-206-139909858503_thumb.jpgpost-206-139909858506_thumb.jpgpost-206-139909847267_thumb.jpg

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Join Our Community!

    Register today, ask questions and share your shrimp and fish tank experiences with us!

  • Must Read SKF Articles

  • Posts

    • ngoomie
      Alright, I've done a bit more research on gentian violet's cancer-causing potential but I haven't yet done research on malachite green's to compare. But from reading the California propositon 65 document about GV (North Americans incl. some Canadians will recognize this as the law that causes some products they buy to be labelled with "known to the state of California to cause cancer", including the exact product I bought) it seems that the risk of cancer is related to internal use, either injection or ingestion. Speaking of ingestion, I think GV bans mainly relate to its use in treating fish/shrimp/etc. which are intended for human consumption, because of the above. And in countries where GV isn't banned for this purpose, it does seem to get used on various species of shrimp without causing any issue for the shrimp themselves (at least enough so for shrimp farming purposes). See the following: In February, the FDA Began Rejecting Imported Shrimp for Gentian Violet and Chloramphenicol (2022 article by Southern Shrimp Alliance) FDA Starts New Calendar Year by Refusing Antibiotic-Contaminated Shrimp from Three BAP-Certified Indian Processors and Adding a BAP-Certified Vietnamese Processor to Import Alert (2024 article by Southern Shrimp Alliance) Southern Shrimp Alliance and some other organizations have tons of other articles in this vein, but I'd be here for a while and would end up writing an absolutely massive post if I were to link every instance I found of articles mentioning shrimp shipments with gentian violet and/or leucogentian violet registering as contaminants. That being said, I know shrimp farmed for consumption and dwarf shrimp are often somewhat distantly related (in fact, the one time a shrimp's species name is listed that I can see, it's the prawn sp. Macrobrachium rosenbergii, who at best occupies the same infraorder as Neocaridina davidi but nothing nearer), but this at least gives a slightly better way of guessing whether it will be safe for aquarium dwarf shrimp or not than my bladder snail anecdote from the OP.
    • sdlTBfanUK
      I would hazard a guess that perhaps those eggs were unfertilized and thereby unviable? Did the eggs change colour, usually yellow to grey as the yolks used up, or any eyes in the eggs. Is your water ok, using RO remineralised and the parameters in range, as I have heard others say that if the water isn't good it can 'force' a molt? How is it going overall, do you have a good size colony in the tank, you may have reached 'maximum occupancy' as a tank can only support so many occupants.
    • beanbag
      Hello folks,  The current problem I am having is that my Taiwan bee shrimp are molting before all their eggs have hatched.  Often the shrimp keep the eggs for 40+ days.  During that time, they lose about half or so, either due to dropping or duds or whatever.  Shortly before molting they look to have about a dozen left, and then they molt with about half a dozen eggs still on the shell.  Then the other shirmp will come and eat the shell.  These last few times, I have been getting around 0-3 surviving babies per batch.  I figure I can make the eggs hatch faster by raising the water temperature more (currently around 68F, which is already a few degrees higher than I used to keep it) or make the shrimp grow slower by feeding them less (protein).  Currently I feed Shrimp King complete every other day, and also a small dab of Shrimp Fit alternating days.  Maybe I can start alternating with more vegetable food like mulberry?  or just decrease the amount of food?
    • ngoomie
      Yeah, cancer risk was a thing I'd seen mentioned a lot when looking into gentian violet briefly. I kinda just figured it might only be as bad as the cancer risk of malachite green as well, but maybe I should look into it more. I've been doing a pretty good job of not getting it on my skin and also avoiding dunking my unprotected hands into the tank water while treating my fish at least, though. Maybe I'll just not use it once I'm done this course of medication anyways, because I know a store I can sometimes get to that's pretty distant carries both malachite green and methylene blue, and in pretty large quantities.
    • jayc
      Can't help you with Gentian Violet, sorry. It is banned in Australia violet for potential toxicity, and even possible cancer risks. I thought it was banned in Canada as well. At least, you now know why there isn't much info on gentian violet medication and it's use. But keep an eye on the snails after a week. If it affects the snails, it might not kill them immediately. So keep checking for up to a week. Much safer options out there. No point risking your own life over unsafe products.
×
×
  • Create New...