Jump to content

Low light foreground plant suggestions


NoGi

Recommended Posts

Hey guys,

 

My tank is looking fairly bare so need to get some foreground plants in there. Any suggestions with low maintenance low light plants that would be suitable?

 

cheers,

Nogi

Link to comment
Share on other sites

From the top of my head there's not many low light foreground plants. You'd be better going with some mosses tied to slate or tubes.

Link to comment
Share on other sites

Could try crypts, like cryptocorne parva. Theres also the micro sword plants, but cant remember their names.

Link to comment
Share on other sites

That's a tough choice. Most plants in low light will just grow taller to get closer to the light source.

 

I'll say Pennywort (Hydrocotyle tripartita), but only because I am looking for a submersed grown specimen for my tank.

I'm using it to simulate a forest of trees in my nano scape.

The delicate stems look like tree trunks, and the clover like leaves give it a feel of a canopy.

Link to comment
Share on other sites

How about Crypt Parva

 

I was thinking using some in the my next tank.

Link to comment
Share on other sites

Bucephalandra. Some variants grow pretty short. In addition, if you plant them into substrate, they grow at least 4 times faster than tie to rock/wood.

 

Recently, I slowly convert all my CO2 injected tanks into low light tank. I am using just Anubias and Buce for all the scaping.

  • Like 1
Link to comment
Share on other sites

Below is a photo of a JRB shrimp tank I revamped a few weeks back. It was using only Anubias Petite and various types of Bucephalandra.

 

DSCF5288-FIXED.jpg

  • Like 2
Link to comment
Share on other sites

Above suggestions all have merit, but it depends what "low light" means. What I consider a low light tank would certainly not grow Hydrocotyle tripartita and the small chain sword Echinodorus tenellus (I think moved to a different genus now?) wouldn't do very well either. The other "chain swords" aren't really that small. The various Crypts are your best bet IMO. The "petite" forms of Anubias barteri var nana are slow but good too. Bucephalandras might be good but I have very little experience with them. 

Link to comment
Share on other sites

That's such a nice picture Shrimpy Daddy. I actually have a high light setup with lots of 3W Cree LEDs but I've turned a bunch off as it was too much light.

 

wired-682x1024.jpg

Link to comment
Share on other sites

That's such a nice picture Shrimpy Daddy. I actually have a high light setup with lots of 3W Cree LEDs but I've turned a bunch off as it was too much light.

 

wired-682x1024.jpg

 

 

Thanks for the compliment. :D

 

You are using a DIY LED? Cool! But that's a lot of LEDs for freshwater. I believe it will be extremely glaring when all of them are on. 

 

What I will suggest you is to connect a variable high frequency PWM in between the power source. In this way, you could adjust the brightness accordingly. You could solder one yourself or you may buy them off-the-shelves. Those off-the-shelves type are those meant for controlling home lighting. However, you need to make sure it is a better one and does not make too much hissing sound (this is usually due to the PWM is using lower frequency). If you have different colour LED, it will be good if you group them into different channel and connect them to different PWM.

 

If you have bright light, there is no way you can grow plant properly. When there is no high nutrient in high light environment, the plant will be burned.

 

The tank in that picture is using LEDs that consists of CREE XPe, CREE XML and Philip Radeon Blue LED. At 4 hours peak period, CREE XPe LED is at 18% duty cycle and CREE XML and Philip Blue LED are at 11% duty cycle.  

Edited by Shrimpy Daddy
Link to comment
Share on other sites

M minuta will grow in low light.

Shrimp daddy what kind of rocks are those?

looks like DRAGON stone

Link to comment
Share on other sites

Below is a photo of a JRB shrimp tank I revamped a few weeks back. It was using only Anubias Petite and various types of Bucephalandra.

 

DSCF5288-FIXED.jpg

Looks good. Will be even better once the buces grow in.

Link to comment
Share on other sites

You are using a DIY LED? Cool! But that's a lot of LEDs for freshwater. I believe it will be extremely glaring when all of them are on. 

 

What I will suggest you is to connect a variable high frequency PWM in between the power source. In this way, you could adjust the brightness accordingly. You could solder one yourself or you may buy them off-the-shelves. Those off-the-shelves type are those meant for controlling home lighting. However, you need to make sure it is a better one and does not make too much hissing sound (this is usually due to the PWM is using lower frequency). If you have different colour LED, it will be good if you group them into different channel and connect them to different PWM.

 

Yeah it's DIY. White CREEs with Red OSRAM LEDs. I used full lights when I was growing Pogos. These days only around half of them are on. I've already got a dimmer of sorts attached to it. It's a day/night module which stimulates sunrise to sunset so peak light output is only for a small percentage of the time. When I get a chance I'll set up a blog system here and migrate my LED build blog over.

Link to comment
Share on other sites

Yeah it's DIY. White CREEs with Red OSRAM LEDs. I used full lights when I was growing Pogos. These days only around half of them are on. I've already got a dimmer of sorts attached to it. It's a day/night module which stimulates sunrise to sunset so peak light output is only for a small percentage of the time. When I get a chance I'll set up a blog system here and migrate my LED build blog over.

 

Sound great. ;)

 

Just a suggestion. Why you swap some for blue LED? It can be used moonlight. :D

Link to comment
Share on other sites

Looks good. Will be even better once the buces grow in.

 

Thanks. I'm still experimenting planting buce in those holes in the rock. Not sure how they will grow into. 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Join Our Community!

    Register today, ask questions and share your shrimp and fish tank experiences with us!

  • Must Read SKF Articles

  • Posts

    • ngoomie
      Alright, I've done a bit more research on gentian violet's cancer-causing potential but I haven't yet done research on malachite green's to compare. But from reading the California propositon 65 document about GV (North Americans incl. some Canadians will recognize this as the law that causes some products they buy to be labelled with "known to the state of California to cause cancer", including the exact product I bought) it seems that the risk of cancer is related to internal use, either injection or ingestion. Speaking of ingestion, I think GV bans mainly relate to its use in treating fish/shrimp/etc. which are intended for human consumption, because of the above. And in countries where GV isn't banned for this purpose, it does seem to get used on various species of shrimp without causing any issue for the shrimp themselves (at least enough so for shrimp farming purposes). See the following: In February, the FDA Began Rejecting Imported Shrimp for Gentian Violet and Chloramphenicol (2022 article by Southern Shrimp Alliance) FDA Starts New Calendar Year by Refusing Antibiotic-Contaminated Shrimp from Three BAP-Certified Indian Processors and Adding a BAP-Certified Vietnamese Processor to Import Alert (2024 article by Southern Shrimp Alliance) Southern Shrimp Alliance and some other organizations have tons of other articles in this vein, but I'd be here for a while and would end up writing an absolutely massive post if I were to link every instance I found of articles mentioning shrimp shipments with gentian violet and/or leucogentian violet registering as contaminants. That being said, I know shrimp farmed for consumption and dwarf shrimp are often somewhat distantly related (in fact, the one time a shrimp's species name is listed that I can see, it's the prawn sp. Macrobrachium rosenbergii, who at best occupies the same infraorder as Neocaridina davidi but nothing nearer), but this at least gives a slightly better way of guessing whether it will be safe for aquarium dwarf shrimp or not than my bladder snail anecdote from the OP.
    • sdlTBfanUK
      I would hazard a guess that perhaps those eggs were unfertilized and thereby unviable? Did the eggs change colour, usually yellow to grey as the yolks used up, or any eyes in the eggs. Is your water ok, using RO remineralised and the parameters in range, as I have heard others say that if the water isn't good it can 'force' a molt? How is it going overall, do you have a good size colony in the tank, you may have reached 'maximum occupancy' as a tank can only support so many occupants.
    • beanbag
      Hello folks,  The current problem I am having is that my Taiwan bee shrimp are molting before all their eggs have hatched.  Often the shrimp keep the eggs for 40+ days.  During that time, they lose about half or so, either due to dropping or duds or whatever.  Shortly before molting they look to have about a dozen left, and then they molt with about half a dozen eggs still on the shell.  Then the other shirmp will come and eat the shell.  These last few times, I have been getting around 0-3 surviving babies per batch.  I figure I can make the eggs hatch faster by raising the water temperature more (currently around 68F, which is already a few degrees higher than I used to keep it) or make the shrimp grow slower by feeding them less (protein).  Currently I feed Shrimp King complete every other day, and also a small dab of Shrimp Fit alternating days.  Maybe I can start alternating with more vegetable food like mulberry?  or just decrease the amount of food?
    • ngoomie
      Yeah, cancer risk was a thing I'd seen mentioned a lot when looking into gentian violet briefly. I kinda just figured it might only be as bad as the cancer risk of malachite green as well, but maybe I should look into it more. I've been doing a pretty good job of not getting it on my skin and also avoiding dunking my unprotected hands into the tank water while treating my fish at least, though. Maybe I'll just not use it once I'm done this course of medication anyways, because I know a store I can sometimes get to that's pretty distant carries both malachite green and methylene blue, and in pretty large quantities.
    • jayc
      Can't help you with Gentian Violet, sorry. It is banned in Australia violet for potential toxicity, and even possible cancer risks. I thought it was banned in Canada as well. At least, you now know why there isn't much info on gentian violet medication and it's use. But keep an eye on the snails after a week. If it affects the snails, it might not kill them immediately. So keep checking for up to a week. Much safer options out there. No point risking your own life over unsafe products.
×
×
  • Create New...