Jump to content

For those looking for Mulberry leaves

ellasfish

By ellasfish
in Equipment & DIY

 Share

Recommended Posts

ellasfish Shrimp Enthusiast

ellasfish

Posted
Posted

I thought I had a lifetime supply of mulberry leaves as my neighbour had a big tree that hang over the fence, until

one morning I heard a lot of chain sawing going... yes they chop down the mulberry tree and all the trees in there backyard.

I told my friend of my despair :hot: to which she quipped "Why don't you buy a dwarf mulberry tree" :D

Since I live in a unit with a sunny balcony that was perfect.

 

So to those that occasional ask Where can I get mulberry leaves this is your answer.

Leaves for Shrimpies, Mulberry pie for me.

post-678-0-87108500-1405654312_thumb.jpg

  • Like 2
Link to comment
Share on other sites
jayc Shrimp Guru

jayc

Posted
Posted

Bought mine from Bunnings.

'Cept it's winter now and all the leaves have fallen off.

Link to comment
Share on other sites
ellasfish Shrimp Enthusiast

ellasfish

Posted
  • Author
Posted

I bought this one in pic a month ago,it had no leaves it was just a stick. Now its got lots of leaves & even mulberries, on my balcony

it gets sun all day. 

Link to comment
Share on other sites
  • HOF Member
ineke Shrimp Guru

ineke

Posted
  • HOF Member
Posted

Mulberry trees are easy to propagate. Just take a cutting and stick in potting mix. If they aren't dwarf trees they can be repotted for about 10 years until they get too big for you then sell them on and stick in some new cuttings. Berries take a few years but leaves start straight away. I have 10 in pots and hope to be able to feed my shrimp from them. They are only a few months old but I got some leaves before it got too cold.

  • Like 2
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Join Our Community!

    Register today, ask questions and share your shrimp and fish tank experiences with us!

  • Must Read SKF Articles

    Shrimp Disease and Treatment
    Tibee, Taitbee, Pinto, Mischling, F1, F2

  • Tropical Fish Forum
    Discus Breeding Guide
    Discus Disease and Treatment Guide

  • Posts

    • sdlTBfanUK
      Finally set up the 30L Shrimp Tank

      By sdlTBfanUK · Posted

      Time for another update! The PH this morning is 6 and KH 0-1 (you can't measure zero obviously). I plan to check everything tomorrow and then a water change on satuday. At the moment the TDS is 190 which should drop to 170 after a water change and then 150ish after the following/next weeks water change. Last time I checked GH it was 6, but again I will do ALL the tests tomorrow. I had to resort to using a PH/KH- product (AQUACID) to get to where these parameters are now but as the water I use has PH6, GH0 and KH0 I assume/hope I won't need to use that from here on, but will see if the parameters stay stable for the next week and have a PH alert disc in the tank which should indicate any significant change. I don't like using these sort of products as a general rule and wouldn't if there were any shrimps in situ and that product has raised the TDS at about .5TDS per drop. I may well order some blue bolts towards the end of next week (the road to the house will be closed for a month from 3rd June so it is next week or wait another 6 weeks) and see how that goes. I plan to drip acclimate them overnight this time so as to not rush that as it shouldn't get cold indoors overnight anyway this time of year. This all depends on the tank parameters staying stable for the next week (aside from the mentioned TDS adjustments with the water changes), though the GH  may drop a tiny bit with using just RO to reduce the TDS but that is fine, and even could be a bonus. I did manage to find some nice floating plant that I had before (good old ebay), and will try and get a photo of that at some point to attach, Azolla red I think it is called? Anyway, keeping my fingers crossed for now but all appears to be going well at this point! Snails seem to be doing well at least.   
    • beanbag
      Shrimp molting before eggs are hatched

      By beanbag · Posted

      That shrimp itself survived the molt just fine, but left about half dozen eggs still in the shell. I haven't measured KH in a really long time, but assume it is zero since I don't have any rocks besides a few small pieces of lava rock.  Maybe you have unwanted rocks in your tank?  My tank is the "long" style which I really like because I have a HMF on one end, and a pump outlet spout that shoots water all the way to the other end.  I have no idea how many shimp it can support because I don't really understand waste management in a tank.  Shrimp poop eventually turns into mulm, but then what?
    • sdlTBfanUK
      Hydra

      By sdlTBfanUK · Posted

      As at time of this post the SL Aqua is available from this UK website, https://gbeeshrimp.co.uk/product/z1/
    • sdlTBfanUK
      Hydra & Planaria shrimp safe removal.

      By sdlTBfanUK · Posted

      Just in case someone may be looking for the SL Aqua it is available from this UK website at time of this post, https://gbeeshrimp.co.uk/product/z1/  
    • sdlTBfanUK
      Shrimp molting before eggs are hatched

      By sdlTBfanUK · Posted

      Thats a great photo, beautiful blue bolt, I hope it survived the molt without dropping the eggs! I think I can just about see some black dots (eyes) on the central egg but can't be 100% sure. I used to (and plan to again) do weekly water change of 10-15% but if you do too large or quick (not drip in new water) that would likely trigger a molt. What KH are they in, my new setup is sitting at (and refusing to budge) KH 3 and PH 7.5 so I may have to settle for neocaridina shrimp this time as opposed to the caridina I want, though not looking/deciding just yet, give the tank a bit more of a run in! Tap water here starts at kH 14, tds 320, when filtered goes to KH 0 and PH 6 but when put in the tank keeps going to KH3 and PH 7.5 despite 3 x 50% water changes???? You may be at 'maximum capacity' with only 20L tank especially if the tank is a cube type rather than shallow type?
×
×
  • Create New...