Jump to content

How do you wash your hands?


blindfisherman

Recommended Posts

How does everyone make their hands shrimp safe?

I work in a wood yard handling treated timber which has been coated in copper chrome arsonate (lovely sounding compound) And have pretty much resorted to not touching anything...

Adjusting suction cups with a pair of tweezers is becoming a pita.

Any chippies or the like out there? How do you clean your hands?

Also as a smoker how do other smokers deal with it? Im always paranoid about putting my hands in the tanks after a ciggy.

Link to comment
Share on other sites

I gave the ciggies away a few years back so i dont have to worry about that.

I normally wash my hands with soap to get contaminates off then re-wash/rise them really well with just water. I guess you could use vinegar and then rinse well?

Link to comment
Share on other sites

Yeah I wash with soap at work but the only soap that cleans off all the crap is pretty nasty smelling stuff itself.

Link to comment
Share on other sites

Look for a new job. Clearly this job is getting in the way of your main objective in life.......shrimp.

Link to comment
Share on other sites

Unfortunately without my job I deffo wouldnt be able to afford to study in sydney and probably wouldn't have shrimp...

I know I gotta quit the ciggies... that will happen eventually...

Link to comment
Share on other sites

I know I gotta quit the ciggies... that will happen eventually...

I hear that buddy, lol :victorious:

Link to comment
Share on other sites

I don't wash, don't need to :P

I got a 100+ pairs of these

Can prob trade some if anyone wants

post-1108-139909853314_thumb.jpg

post-2957-139909851395_thumb.jpg

Link to comment
Share on other sites

OMFG neosin.... where do I source a pallet of these?

I got as far as thinking about gloves... full arm gloves never even crossed my mind though...

Link to comment
Share on other sites

How much for an ArmDom lol?

This just gave me stitches laughing...

Link to comment
Share on other sites

I don't wash' date=' don't need to :P

I got a 100+ pairs of these

Can prob trade some if anyone wants

post-1108-139909853314_thumb.jpg

If a doctor walked in with that bad boy on i'd be running for the hills.

Link to comment
Share on other sites

I don't wash' date=' don't need to :P

I got a 100+ pairs of these

Can prob trade some if anyone wants

post-1108-139909853314_thumb.jpg

if they are for medical use be careful as they will have a steriliser or a anti bacterial residue on them

Link to comment
Share on other sites

They look kinda like full length versions of the gloves I used to use for fibreglassing.

I think they were just straight plastic without the additives. But as you have mentioned garry I will be careful...

Probably just going to stick to my extra long equipment to keep my hands out.... ahh well by the end of it I should have the control/ precision with the tweezers to catch flies ninja style...

Link to comment
Share on other sites

if they are for medical use be careful as they will have a steriliser or a anti bacterial residue on them

I thought medical gloves were radiation sterilized?

Link to comment
Share on other sites

If a doctor walked in with that bad boy on i'd be running for the hills.

First thing doctor would say " could you please stand up and touch your toes"

Link to comment
Share on other sites

I'm not sure
Haha' date=' me either! I thought it was radiation and not chemicals, and i hope so because i've been using sterile gloves for feeding because i've been covered in silicone, paint and putty the last week. Not sure if they're all the same either.
First thing doctor would say " could you please stand up and touch your toes"
Oooooh, do not want. Had to touch my toes for an army medical once, so VERY glad it didn't end the way i'm thinking it could've now.
Link to comment
Share on other sites

Probably just going to stick to my extra long equipment to keep my hands out.... /QUOTE]

1stly seeing that armdom made me laugh, then the above got me in stitches....lol

Link to comment
Share on other sites

They look kinda like full length versions of the gloves I used to use for fibreglassing.

I think they were just straight plastic without the additives. But as you have mentioned garry I will be careful...

Probably just going to stick to my extra long equipment to keep my hands out.... ahh well by the end of it I should have the control/ precision with the tweezers to catch flies ninja style...

Ahhhhsoooooo Mr Miagi

Link to comment
Share on other sites

I think for OH&S issues most sterile gloves will be radiated (otherwise the chemicals would leech into people who have to wear them constantly.

I work in a medical research facility and there are soooo many different types of gloves that have been treated in different ways. If i had to pick one to use for shrimp i would be going for catering/food grade. Also be very careful to not use powdered gloves. IMO the ones that are being used above are not medical as they would fit much more snugly, perhaps they are vet gloves.

Link to comment
Share on other sites

  • HOF Member

Pretty sure they are vet gloves for pregnancy testing cows and horses and unblocking constipated faeces a load of crap really:encouragement: sure as hell would run if a doctor asked me to open up wide if he had them on:sour:

Link to comment
Share on other sites

How does everyone make their hands shrimp safe?

I work in a wood yard handling treated timber which has been coated in copper chrome arsonate (lovely sounding compound) And have pretty much resorted to not touching anything...

Adjusting suction cups with a pair of tweezers is becoming a pita.

Any chippies or the like out there? How do you clean your hands?

Also as a smoker how do other smokers deal with it? Im always paranoid about putting my hands in the tanks after a ciggy.

Why don't you were gloves at work when handling the treated timber.

Smoking.....easy, smoke with one hand, put the other hand in the tank. Lol

Link to comment
Share on other sites

Why don't you were gloves at work when handling the treated timber.

Smoking.....easy' date=' smoke with one hand, put the other hand in the tank. Lol[/quote']

I refuse to wear gloves when working with machines... seen too many horror stories from gloves getting caught and sucking the hand in too.

I have been taught how to smoke by a quadraplegic without touching the smoke so I might have to resort to that when I wanna play with the shrimp.

Link to comment
Share on other sites

Ok you didn't say you were working with machines, I had a cousin-in-law killed that way. If you are working with a machine you don't need to handle the logs then.

I would suggest a surgeon type scrub of your hands when you get home and a pretty thorough rinse in straight water.

How does your friend smoke then, lol?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Join Our Community!

    Register today, ask questions and share your shrimp and fish tank experiences with us!

  • Must Read SKF Articles

  • Posts

    • sdlTBfanUK
      Thats a great photo, beautiful blue bolt, I hope it survived the molt without dropping the eggs! I think I can just about see some black dots (eyes) on the central egg but can't be 100% sure. I used to (and plan to again) do weekly water change of 10-15% but if you do too large or quick (not drip in new water) that would likely trigger a molt. What KH are they in, my new setup is sitting at (and refusing to budge) KH 3 and PH 7.5 so I may have to settle for neocaridina shrimp this time as opposed to the caridina I want, though not looking/deciding just yet, give the tank a bit more of a run in! Tap water here starts at kH 14, tds 320, when filtered goes to KH 0 and PH 6 but when put in the tank keeps going to KH3 and PH 7.5 despite 3 x 50% water changes???? You may be at 'maximum capacity' with only 20L tank especially if the tank is a cube type rather than shallow type?
    • beanbag
      Right now this tank only has blue bolts and golden bee (red bolts?).  The eggs start off all brown, but at the end, I notice that some are kind of a clear pink-ish color.  So I don't know if that is the egg color of dud or golden bee.  Picture of shrimp only about half hour before molting. The water is always RO + remineralizer, so it should be ok. The tank seems to still be on a "good streak" ever since I started the regimen of weekly water change, monthly gravel vac and plant trim.  The point being to keep the amount of waste low and removing moss / floating plants so that the nitrates go towards growing algae.  At one point, I had three berried females, but only netted about half dozen babies by the end, due to this early molting problem.  There might be about 30-40 shrimp total in 5 gallons, but still very few full-sized adults.
    • ngoomie
      Alright, I've done a bit more research on gentian violet's cancer-causing potential but I haven't yet done research on malachite green's to compare. But from reading the California propositon 65 document about GV (North Americans incl. some Canadians will recognize this as the law that causes some products they buy to be labelled with "known to the state of California to cause cancer", including the exact product I bought) it seems that the risk of cancer is related to internal use, either injection or ingestion. Speaking of ingestion, I think GV bans mainly relate to its use in treating fish/shrimp/etc. which are intended for human consumption, because of the above. And in countries where GV isn't banned for this purpose, it does seem to get used on various species of shrimp without causing any issue for the shrimp themselves (at least enough so for shrimp farming purposes). See the following: In February, the FDA Began Rejecting Imported Shrimp for Gentian Violet and Chloramphenicol (2022 article by Southern Shrimp Alliance) FDA Starts New Calendar Year by Refusing Antibiotic-Contaminated Shrimp from Three BAP-Certified Indian Processors and Adding a BAP-Certified Vietnamese Processor to Import Alert (2024 article by Southern Shrimp Alliance) Southern Shrimp Alliance and some other organizations have tons of other articles in this vein, but I'd be here for a while and would end up writing an absolutely massive post if I were to link every instance I found of articles mentioning shrimp shipments with gentian violet and/or leucogentian violet registering as contaminants. That being said, I know shrimp farmed for consumption and dwarf shrimp are often somewhat distantly related (in fact, the one time a shrimp's species name is listed that I can see, it's the prawn sp. Macrobrachium rosenbergii, who at best occupies the same infraorder as Neocaridina davidi but nothing nearer), but this at least gives a slightly better way of guessing whether it will be safe for aquarium dwarf shrimp or not than my bladder snail anecdote from the OP.
    • sdlTBfanUK
      I would hazard a guess that perhaps those eggs were unfertilized and thereby unviable? Did the eggs change colour, usually yellow to grey as the yolks used up, or any eyes in the eggs. Is your water ok, using RO remineralised and the parameters in range, as I have heard others say that if the water isn't good it can 'force' a molt? How is it going overall, do you have a good size colony in the tank, you may have reached 'maximum occupancy' as a tank can only support so many occupants.
    • beanbag
      Hello folks,  The current problem I am having is that my Taiwan bee shrimp are molting before all their eggs have hatched.  Often the shrimp keep the eggs for 40+ days.  During that time, they lose about half or so, either due to dropping or duds or whatever.  Shortly before molting they look to have about a dozen left, and then they molt with about half a dozen eggs still on the shell.  Then the other shirmp will come and eat the shell.  These last few times, I have been getting around 0-3 surviving babies per batch.  I figure I can make the eggs hatch faster by raising the water temperature more (currently around 68F, which is already a few degrees higher than I used to keep it) or make the shrimp grow slower by feeding them less (protein).  Currently I feed Shrimp King complete every other day, and also a small dab of Shrimp Fit alternating days.  Maybe I can start alternating with more vegetable food like mulberry?  or just decrease the amount of food?
×
×
  • Create New...