Jump to content

strong light for mini tank


jrc693

Recommended Posts

I have a tank im going to start up to test out EI method, anyway its probably around 5 litres max, does anyone know any good and strong miniture lamps or lights that could be used for this setup?

Thanks!

Link to comment
Share on other sites

There's an Eheim LED spot that's pretty sweet, they aren't very cheap, about $140 :encouragement:

aqualife-eheim-nano-led-tank-aquarium_zpsc8903963.jpg

Eheim-aqua-led-light_zpsf44d391e.gif

  • Like 1
Link to comment
Share on other sites

  • 4 weeks later...

2 recommendations

1. LED floodlight from **** (6500-7000k purewhite)

2. desklamp + 9w ccfl globe from bunnings.

  • Like 1
Link to comment
Share on other sites

yeh i was looking at those led flood lights!

you have to wire them yourself but,

has anyone got experience wiring them? its not too difficult is it?

Link to comment
Share on other sites

Not at all, putting a plug top on is easy, just remember, brown is active/live, blue is neutral & green & gold is earth. The plug top usually has a letter stamped on each terminal so you know which wire goes where :victorious:

Link to comment
Share on other sites

yeh i was looking at those led flood lights!

you have to wire them yourself but' date='

has anyone got experience wiring them? its not too difficult is it?[/quote']

Easy peasy japanesy but do remember to have power OFF and NOT plugged in before attempting this!

Link to comment
Share on other sites

I purchased 4 from warcom, they came wired with aussie approval and plugs http://www.warcom.com.au/products/40613_ledware_led_flood_light_lamp_240v_10w_1000lm

2 from veco in moorabin, they come with plugs but are a fraction dimmer but the cable is of worse quality, the insulation cracked on me

1 from ****, same quality as the veco one except it didn't have a plug so I opened it up and used an extension cable with a chopped of end

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Join Our Community!

    Register today, ask questions and share your shrimp and fish tank experiences with us!

  • Must Read SKF Articles

  • Posts

    • sdlTBfanUK
      Time for another update! The PH this morning is 6 and KH 0-1 (you can't measure zero obviously). I plan to check everything tomorrow and then a water change on satuday. At the moment the TDS is 190 which should drop to 170 after a water change and then 150ish after the following/next weeks water change. Last time I checked GH it was 6, but again I will do ALL the tests tomorrow. I had to resort to using a PH/KH- product (AQUACID) to get to where these parameters are now but as the water I use has PH6, GH0 and KH0 I assume/hope I won't need to use that from here on, but will see if the parameters stay stable for the next week and have a PH alert disc in the tank which should indicate any significant change. I don't like using these sort of products as a general rule and wouldn't if there were any shrimps in situ and that product has raised the TDS at about .5TDS per drop. I may well order some blue bolts towards the end of next week (the road to the house will be closed for a month from 3rd June so it is next week or wait another 6 weeks) and see how that goes. I plan to drip acclimate them overnight this time so as to not rush that as it shouldn't get cold indoors overnight anyway this time of year. This all depends on the tank parameters staying stable for the next week (aside from the mentioned TDS adjustments with the water changes), though the GH  may drop a tiny bit with using just RO to reduce the TDS but that is fine, and even could be a bonus. I did manage to find some nice floating plant that I had before (good old ebay), and will try and get a photo of that at some point to attach, Azolla red I think it is called? Anyway, keeping my fingers crossed for now but all appears to be going well at this point! Snails seem to be doing well at least.   
    • beanbag
      That shrimp itself survived the molt just fine, but left about half dozen eggs still in the shell. I haven't measured KH in a really long time, but assume it is zero since I don't have any rocks besides a few small pieces of lava rock.  Maybe you have unwanted rocks in your tank?  My tank is the "long" style which I really like because I have a HMF on one end, and a pump outlet spout that shoots water all the way to the other end.  I have no idea how many shimp it can support because I don't really understand waste management in a tank.  Shrimp poop eventually turns into mulm, but then what?
    • sdlTBfanUK
      As at time of this post the SL Aqua is available from this UK website, https://gbeeshrimp.co.uk/product/z1/
    • sdlTBfanUK
      Just in case someone may be looking for the SL Aqua it is available from this UK website at time of this post, https://gbeeshrimp.co.uk/product/z1/  
    • sdlTBfanUK
      Thats a great photo, beautiful blue bolt, I hope it survived the molt without dropping the eggs! I think I can just about see some black dots (eyes) on the central egg but can't be 100% sure. I used to (and plan to again) do weekly water change of 10-15% but if you do too large or quick (not drip in new water) that would likely trigger a molt. What KH are they in, my new setup is sitting at (and refusing to budge) KH 3 and PH 7.5 so I may have to settle for neocaridina shrimp this time as opposed to the caridina I want, though not looking/deciding just yet, give the tank a bit more of a run in! Tap water here starts at kH 14, tds 320, when filtered goes to KH 0 and PH 6 but when put in the tank keeps going to KH3 and PH 7.5 despite 3 x 50% water changes???? You may be at 'maximum capacity' with only 20L tank especially if the tank is a cube type rather than shallow type?
×
×
  • Create New...