Jump to content

Combined sump/rack design help


Foxpuppet

Recommended Posts

Ok here goes, for my new tank project I plan to cut down on existing tanks and breeding racks by combining a rack into the sump. I've got a 1500x600x600 planted display tank to filter ,heat/cool & look pretty by removing unnecessary system components like heaters etc by putting them away under the cabinet.

Rack will be for shrimp breeding, namely CRS,CBS and TB varieties and CPD spawning.

I've already got a 1500L x360d x40h tank divided by glass into 5 equal 300mm sections with stainless steel mesh flow through ports so the tank could run off one single filter system.

My idea is to turn bays 1 & 5 into the inlet/media/filter & return pump/heater sections, and then divide the 3 remaining bays in half (150mm wide) with removable Perspex dividers with stainless mesh flow through ports. These dividers will sit about 20mm into an aqua soil substrate so water will also be able to flow under them through soil.

There will also be a eheim 2217 looping in and out of the sump to run a chiller through so I get the extra filtration of that too.

Sump will have a drilled emergency drain that goes under house out to garden.

I would also like to have an R/O ATO incorporated somehow.

Here are some sketches, please excuse the roughness.

6a88f670e476f8cf1c9d5ab2000f271c.jpg excuse 380 dimension, should read 360mm

e94d916134d10bb288beff5be0df74dc.jpg

Sent from my iPad using Tapatalk

  • Like 2
Link to comment
Share on other sites

Here's a shot of the tank to become the sump.

beea02da1d2f593b44c82e878f8bba0e.jpg

39097f7daa85ea8219ba9cb1b0829df1.jpg

Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

Nice work, did you make it yourself?

Thats also a decent size hole in the dividers. Should be good for water flow. That's the issue I have with 3 small circular holes and ended up needing otto filters in both sides.

Link to comment
Share on other sites

Nice work, did you make it yourself?

Thats also a decent size hole in the dividers. Should be good for water flow. That's the issue I have with 3 small circular holes and ended up needing otto filters in both sides.

Nah I didn't make I, I got lucky Nd picked it up from a shrimper getting out of the hobby. Tank and 1500mm LED for $300.

It's almost a shame to modify it as its already a nice setup, but should suit my needs perfectly..... Well almost!

Sent from my iPad using Tapatalk

Link to comment
Share on other sites

Wow that is a awesome pick up.

I am really interested to see how it goes when you have it up and running.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Join Our Community!

    Register today, ask questions and share your shrimp and fish tank experiences with us!

  • Must Read SKF Articles

  • Posts

    • ngoomie
      Alright, I've done a bit more research on gentian violet's cancer-causing potential but I haven't yet done research on malachite green's to compare. But from reading the California propositon 65 document about GV (North Americans incl. some Canadians will recognize this as the law that causes some products they buy to be labelled with "known to the state of California to cause cancer", including the exact product I bought) it seems that the risk of cancer is related to internal use, either injection or ingestion. Speaking of ingestion, I think GV bans mainly relate to its use in treating fish/shrimp/etc. which are intended for human consumption, because of the above. And in countries where GV isn't banned for this purpose, it does seem to get used on various species of shrimp without causing any issue for the shrimp themselves (at least enough so for shrimp farming purposes). See the following: In February, the FDA Began Rejecting Imported Shrimp for Gentian Violet and Chloramphenicol (2022 article by Southern Shrimp Alliance) FDA Starts New Calendar Year by Refusing Antibiotic-Contaminated Shrimp from Three BAP-Certified Indian Processors and Adding a BAP-Certified Vietnamese Processor to Import Alert (2024 article by Southern Shrimp Alliance) Southern Shrimp Alliance and some other organizations have tons of other articles in this vein, but I'd be here for a while and would end up writing an absolutely massive post if I were to link every instance I found of articles mentioning shrimp shipments with gentian violet and/or leucogentian violet registering as contaminants. That being said, I know shrimp farmed for consumption and dwarf shrimp are often somewhat distantly related (in fact, the one time a shrimp's species name is listed that I can see, it's the prawn sp. Macrobrachium rosenbergii, who at best occupies the same infraorder as Neocaridina davidi but nothing nearer), but this at least gives a slightly better way of guessing whether it will be safe for aquarium dwarf shrimp or not than my bladder snail anecdote from the OP.
    • sdlTBfanUK
      I would hazard a guess that perhaps those eggs were unfertilized and thereby unviable? Did the eggs change colour, usually yellow to grey as the yolks used up, or any eyes in the eggs. Is your water ok, using RO remineralised and the parameters in range, as I have heard others say that if the water isn't good it can 'force' a molt? How is it going overall, do you have a good size colony in the tank, you may have reached 'maximum occupancy' as a tank can only support so many occupants.
    • beanbag
      Hello folks,  The current problem I am having is that my Taiwan bee shrimp are molting before all their eggs have hatched.  Often the shrimp keep the eggs for 40+ days.  During that time, they lose about half or so, either due to dropping or duds or whatever.  Shortly before molting they look to have about a dozen left, and then they molt with about half a dozen eggs still on the shell.  Then the other shirmp will come and eat the shell.  These last few times, I have been getting around 0-3 surviving babies per batch.  I figure I can make the eggs hatch faster by raising the water temperature more (currently around 68F, which is already a few degrees higher than I used to keep it) or make the shrimp grow slower by feeding them less (protein).  Currently I feed Shrimp King complete every other day, and also a small dab of Shrimp Fit alternating days.  Maybe I can start alternating with more vegetable food like mulberry?  or just decrease the amount of food?
    • ngoomie
      Yeah, cancer risk was a thing I'd seen mentioned a lot when looking into gentian violet briefly. I kinda just figured it might only be as bad as the cancer risk of malachite green as well, but maybe I should look into it more. I've been doing a pretty good job of not getting it on my skin and also avoiding dunking my unprotected hands into the tank water while treating my fish at least, though. Maybe I'll just not use it once I'm done this course of medication anyways, because I know a store I can sometimes get to that's pretty distant carries both malachite green and methylene blue, and in pretty large quantities.
    • jayc
      Can't help you with Gentian Violet, sorry. It is banned in Australia violet for potential toxicity, and even possible cancer risks. I thought it was banned in Canada as well. At least, you now know why there isn't much info on gentian violet medication and it's use. But keep an eye on the snails after a week. If it affects the snails, it might not kill them immediately. So keep checking for up to a week. Much safer options out there. No point risking your own life over unsafe products.
×
×
  • Create New...