Clicky

Jump to content
edishrimp

SaltyShrimp Bee Shrimp GH+ vs Softwater GH+

Recommended Posts

edishrimp

Hey guys!

Recently decided to invest in an RODI unit to improve the quality of the water in my shrimp tanks and reduce the margin for any catastrophic deaths. However, sadly my LFS doesn't seem to carry anymore SS Bee Shrimp GH+ minerals. The owner does however have the fish version for soft-water environments and he claims that there isnt a difference. The dosage amount seems similar between the two as well. Does anyone have any experience with using it with shrimp?

 Image result for salty shrimp gh+The packaging looks like this in case anyone was wondering!

Thanks in advance!!

Share this post


Link to post
Share on other sites
jayc
14 hours ago, edishrimp said:

he claims that there isnt a difference.

Oh please!

How can there be no difference? Why even bother having a separate product in that case?

 

The big difference Softwater GH+ to the Bee Shrimp GH+ is that Softwater GH+ also alters pH, whereas Bee Shrimp GH+ does not.

That is a big difference.

We always say, "Don't use pH Down to reduce your pH in the tank" or "don't use chemicals to reduce pH". Well, this is what Softwater GH+ does. It increases TDS but has chemicals to reduce pH.

 

 

If you can't find SS GH+ , Do It Yourself.

Have you not read my DIY remineralising thread? The ingredients are all there for you to make it yourself.

Edited by jayc

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • jba6511
      By jba6511
      I am new to keeping shrimp and was hoping someone can help me sort through some issue with the water parameters of my tank. The tank is a 4.6 gallon cube, that runs between 72 - 74 (22.22 - 23.33) degrees, 0 ammonia, 0 nitrates and 0 nitrites. It has been cycled and running since December 2015 but about a month back converted to a shrimp tank (removed the fish, did a 100% water change and added sponge over filter). Current inhabitants are a nerite snail and 1 RCS.   I initially had 3 RCS, but lost two. I believe this was due to them trying to molt as they both had white lines on their back, but were fine the day before (one after 7 days and another after 12 days). I also have some java jerns, java moss, dwarf sags, crypt wendetti, and some floaters.
      Current water parameters:
      TDS: 166ppm
      GH: 1.7
      KH: 0
      My PH is also low (6 something if I recall but can measure this again if needed). I am using tap water that I add prime to that is then place in a rubbermaid with a powerhead until I need to do top offs / water changes.  So far all I have done is top off on the shrimp tank. My plan is to pick up some Salty Shrimp and add that to the tap water to raise GH and KH. I believe I should be shooting for a GH between 6-8 and KH of 2-5, with a TDS between 80 and 200. I also plan to add some iodine twice a week to try and address the molting issue.
      Does this seem reasonable? Any additional changes I should be making or consider? Once the water parameters are in order, I would like to add some additional RCS to the tank.
       
       
    • puddlejumper388
      By puddlejumper388
      Hi everyone, I have spent some time searching (unsuccessfully!) for any threads set up to address how to naturally and chemically treat the more important water parameters. Obviously I'm not talking about temp, but the PH, TDS, KH and GH levels are the ones I'm most interested in. Now I'm country based so the only water I've got access to is R/W and bore (perfectly drinkable from the pump itself, no brackishness) which I have used for 4 of my 6 tanks (tropical and a few lower grade cherries). But I want to better hone in the water condition as best I can so any tricks to raise lower the above parameters naturally or if need be chemically. Or if anyone knows/finds a link, anything will be appreciated.
      Had put this in the pinned "Shrimps 101" but will try to delete it as it's probably better as a separate post.
      Being rural makes water choice difficult and some of the values I've tested are way out, hence why I'm seeking advice.
      Cheers all.
       
    • revolutionhope
      By revolutionhope
      Hey SKF peoples,
      I'm just mixing up my RO water with a combination of GH+ and GH/KH+ to keep tiger shrimps in. And I thought I'd share my experience, I gradually added the minerals and measured pH along the way and I thought I'd share the results.
      I note that the pH may change overnight after letting stand but I have been running a pump in the water to mix it well and aerate it so I doubt there will actually be any measurable shift.
      As you can see by the results, the GH/KH+ pushed up the pH a LOT! Does anyone else have this experience? I have achieved my desired water parameters in terms of ppm and GH/KH however the pH is unreal.. and this is not the first time this has happened to me either. However t is the first time I have taken the effort to document the fact.
      I'm planning on experimenting with adding a very shallow layer of the cal aqua labs black earth premium and monitoring the pH over the course of days.. expecting it to slowly drop...
      Any input is 100% welcome!
      love n peace
      will
      PS the initial drop in pH after adding the first lot of GH+ I understand can be explained (as I have read elsewhere) that when attempting to measure the pH of RO water using a pH meter the device can not accurately produce any result due to the lack of ions/conductivity in the water.
      27/05/2016 EC meter  HM  TDS-3 pH meter pH APIkit      KH        GH At time of water mixing EC0  ppm0         fresh RO     6.6       after adding 50ppm GH+     6.3       after adding 30ppm GH/KH     7       after adding 25ppm GH/KH     7.5       after adding 45ppm GH/KH EC300   8.3       after adding 17ppm GH/KH EC333  ppm175 8.3 7.8 3 8
    • larrymull
      By larrymull
      Hi guys,
      My GH has been around 8 for the last few weeks, a month. I have brought my TDS down from 205 to 175 and I am still seeing the GH at 8, numerous water changes have happened with RO water etc.
      All other parameters are in check.
      Any thoughts how I can get the GH down (besides the obvious water changes)? I haven't seen many moults either.
      Cheers.


  • Register today, ask questions and share your shrimp and fish tank experiences with us!

    Join Our Community!

  • Posts

    • jayc
      Newer A/C units now have auto on/off features. Maybe it's time for an upgrade @Zoidburg 😁 The things we do for our shrimp!
    • jayc
      @Zoidburg, happy to do that for you. Moved.
    • Zoidburg
      @jayc Would it help at all to move this thread to General Questions/Discussions? Still looking for ideas on what these guys may be.
    • pastu
      I really enjoy cycling a tank from zero. Find fascínating the invisible process seemingly Out of the blue , where ammonia  rises, leaching from the substrate ( always use Ada amazonia or help shrimp substratos) then ammonia turns into nitrite and those two dissapear and you are left with nitrate, al i had to do  was wait, i also use seachem matrix or pondguru,s ultimate and that ends Taking Care of nitrate too.
    • Zoidburg
      I think it might help to understand what water parameters you already have and what substrate.
      As far as the bird mineral blocks go? They should, in theory, be okay, however I'd be concerned about the metal that's in many of them. The metal that's meant to be tied to the bird cages. Wouldn't personally use it, because if extra calcium was required, I'd just add it from a remineralizer or get some form of calcium in another form to add to the tank.
×