Clicky

Jump to content
Brooohm

Newly started tank running into problems

Recommended Posts

Brooohm

Hello. I have a rather new aquarium set up. Its 20 litres (5-6 gallons). I cycled it for a couple of weeks, and tested the nitrates (0.05). I then did a 50% water change and bought 10 rcs, and 6 neon tetras. It all went fine, i may have overfed a bit in the beginning, but made sure to do a 20% water change every twice a week, to compliment that. 2 first weeks went fine, but then i noticed a dead shrimp. I pulled it out, did a water change, and didnt give it much thought. About 3-4 days later, and i just found a dead neon. I might suspect i have lost more shrimp, since i couldnt see them all today, but i dont know for sure. I was just wondering, is it normal to lose a couple of fish the first month of a new tank, or should i be worried? The water temperature is around 24C (75 Fahrenheit), and they dont give any signs of struggle.

Thanks in advance

Share this post


Link to post
Share on other sites
jayc

It's not a very big tank and the sudden load in additional food, fish and shrimps might not be enough for the beneficial bacteria to cope with the added ammonia. 

Share this post


Link to post
Share on other sites
Brooohm

So if i just make sure to not overfeed, it should be fine? I have become observative about the amount of food im feeding, also since i only have about 6 tetras as actual fish.

Share this post


Link to post
Share on other sites
jayc
8 hours ago, Brooohm said:

So if i just make sure to not overfeed, it should be fine?

That would help  reduce one source of ammonia. But really, what you need is for the tank to mature, and that can only happen with time. Unfortunately there might be more deaths until the tank matures.

Edited by jayc

Share this post


Link to post
Share on other sites
Brooohm

Thankfully it´s not the most expensive fish I have in the tank. Im down to 5 tetras, but the shrimp seem to be happy, and I think I might have seen 1 or 2 berried, not really 100% sure since im still quite inexperienced. Would frequent water changes limit risks? (2 times a week). Thanks btw, the help is really appreciated. 

Share this post


Link to post
Share on other sites
jessaweeshrimp

It depends in your water quality. Do you know its parameters? TDS and GH and KH and pH are good to know.

You can add liquid Beneficial Bacteria to help process the Ammonia and Nitrite 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • TheKeeper
      By TheKeeper
      So I currently have a 6 gallon planted tank that has been set up and running for 3 weeks. Im about to purchase my red cherry shrimp to put in this tank. There is plenty of algae in the tank for them to eat, so food should be fine for the beginning correct? Plus it is heavily planted meaning there is plenty of organic matter to be consumed at all times, so they shouldn't really need to be fed ever? Also i see that drip acclimation is best for getting them used to there new home. If i did this till the tank is half empty for provided them with as close conditions as possible without emptying the tank. Am i good to just refill the tank afterward or from now on when i do water changes do they all need to be dripped in? Also is it true that adding calcium to the tank is beneficial for the shrimp to molt?
      Im a pretty experienced fish keeper, just haven't ever had with shrimp so I dont want to kill all these expensive shrimps due to lack on knowledge. Any more knowledge or advice that can be given to me is high encouraged, even if it seems simple. 
      Some specs of the tank, tanks does have a filter, that has small openings that could suck up baby shrimp. Its a small filter and has algae growth on the openings so it really does reduce the flow a bit, where i dont see it becoming a  huge issue. The tank is co2 injected, but thats pretty nailed down so nuking them with co2 is highly unlikely. The tank has a soil bottom capped with coarse sand. The vast majority of the bottom of the tank is carpeted with plants but they still have a way to go. There is no lid on the top of the tank. The tank does have some natural river stones in it with the brown algae growth on them. And a lot of the plants have the white "bugger" algae growing on them or around them. The tank receives about 10 hours of light a day. I know i put a lot of un-important information here, but maybe a pro will see a problem here and be able to inform me so I can correct it. Thanks for your time and consideration in advance!!!!
      Regards
      -The Keeper
    • TheKeeper
      By TheKeeper
      Ive done alot of research but let me explain my set up for you. I have a 6 gal tank that is approx 12 inch tall. It is a fertilized and currently has a DIY co2 on it, i did this by taking a 2 liter bottle and adding sugar and yeast, it is connected to a special co2 bubble (whatever they are called). The tank also has high lighting and is completely planted carpeted and bigger plants. Im about to be adding in my cherry shrimp and know that gassing them with co2 is possible at night. And im wanting to avoid this of course. Yet i dont want to spend alot of money upgrading my co2 system. The co2 bubblier is only 8-9 inchs from the water line. The majority of the bubbles reach the surface meaning not all the co2 is dissolving or there are other gasses present. Im wondering if I can get away with this co2 delivery system. Or what simple upgrades could be made so that it doesn't run at night? from what i understand it would be at night i would gas the shrimp? Also I do a 50% water change 1 if not 2 times a week. 
       
      Options ive thought of-
      1. Instead of a 2 liter bottle maybe like a 12 oz bottle, scale back the yeast and sugar so there is less co2 being produced
      2. Releasing the pressure in the DIY bubblier before bed. so it would take maybe 4-6 hour for the pressure to build up again and start bubbling 
      3. Upgrading system (Dont want to do this really, but i though of it)
    • jessaweeshrimp
      By jessaweeshrimp
      I am setting up a new tank and currently have a 36" 12 gallon, a 30 gallon long, a 20 high, a 10 gallon and a 29 gallon. I am now setting up a 75 gallon. I am using a Submersible and a HOB and a UG with Power heads.
      My question revolves around running the Powerheads in reverse and feeding them with CO2 from a Citric/Baking soda set up. Will the CO2 hurt the plants being delivered to the roots first for maximum diffusion? I do use Seachem Excel in my tanks trying to give the plants the edge over the algae. 
      I have also used the H2O2 and CO2 punch technique successfully but haven't chatted too much about ferts and CO2. Does anyone see any concerns with my plan?
       
    • Dimos
      By Dimos
      Hi everyone,
      recently most of my shrimp started dying and I cannot understand the reason. I moved the tank in a place where there is no direct sunlight and I monitor the temperature several times a day which stays constant around 78-79 degrees. I also check the water parameters and everything is as it should! Could it be that I didn't do very frequent water changes?
      I am a little disappointed and I don't know if I will get more shrimp in the future. I have the red cherries and they are supposed to be from the strongest kind of shrimp.
      Thanks,
      Dimos
    • gk2v
      By gk2v
      Im keen on trying tabs rather than the liquid forms of plant ferts and want to know if anyone has had success with a particular one/brand in shrimp specific tanks?
      From what i can gather the doses are about the same for example with flourish but i have no idea if its better or worse for the shrimp?
      And if i go the tabs or stick versions how much copper is too much? All fertilisers seem to have a very tiny amount like 0.001% but it would be less accurate in tab form due to the fixed size of the tab etc  http://www.seachem.com/Products/product_pages/FlourishTabs.html
      Any info would be great


×