Hi I'm an animal enthusiast with many frogs snakes and arachnids but it's my first attempt at caring for cherry shrimp..i researched with my girlfriend quite a bit and already set up a planted tank in a nano 2.6gallon aquarium. It will be cycling and until then I just wanted some feedback on how it looks and what y'all think about it? Thankyou ~
I am trying to prepare my aquarium for shrimp -- in particular Riffle Shrimp.
After reading that these are escape experts I was momentarily put off the idea because I was aware of definite escape routes that they could easily crawl along and out through. But I'd quickly pushed that reluctance aside to focus on a solution. There has to be one. SKF forum members surely have one.
Escape routes in my set up are: specifically the filter inlet and outlet, along with light attachment clips and wave-maker power cord.
I first thought of perspex cut to fit, but that would be near impossible to fit perfectly and I suspect they only need 2-3 mm to squeeze through? I figured something that was flexible/moldable would be more suitable. I was thinking maybe some fine stainless wire mesh that's used for moss attachment? But that's probably a bit expensive for the size of the pieces i'd need? Or flywire? Or perhaps some security door screen, but i'd be worried about paint leeching into the water as that stuff may likely rust with time?
Anyone have any ideas? I couldn't find a thread/topic when I searched of 'shrimp escaping'. I'm pretty sure someone here has a simple solution. What do you do to stop your shrimp escaping?
Apologies to Admin: I originally thought to add this to my thread on Riffles as I thought it was appropriate under the topic of planning a tank set up for them, but I was unable to add a further photo to illustrate what I'm trying to find a solution for (I'd reached the image upload limit). I figure this topic fits under 'Shrimp Health & Care'. Please move or delete or edit as you see fit. Thank you.
I have been a long time lurker on this forum and have learnt a lot from past and present members who have contributed to this forum. Thank you.
This is my first 'real' post and I hope this would help anyone who might be considering building a rack themselves. As requested by @Disciple, hope this helps you too.
Just a bit of background on my experience. My only previous build attempt was for a stand and sump for a 4x2x2. It was my first build dabbling with staining wood and using silicon for sump baffles, etc. As you can see from the photos below, they are pretty amateurish but I am happy for how it turned out as a first attempt. Next step is to fit some doors to it.
The stand was built following this video by King of DIY. https://www.youtube.com/watch?v=jN4Y9AYuwcQ
Anyway, this gives you an idea of the level of experience I have before I embark on my ambitious attempt to build a rack.
Below are some photos of my 4x2x2, sump and stand build, and some of its inhabitants. Sorry they are not shrimp related and not of great quality taken using my phone.
Stand and sump
Filled up and planted.
Display tank front view.
Display tank side view.
With background in place and tank inhabitants added consisting of altum flora discus, german blue rams, panda corydoras, cardinal tetras, otocinclus, red cherry shrimps, darwin algae shrimps and darwin red nose shrimps.
Altum flora discus.
German blue rams with their fry.
I have browsed many build threads including some from here and have built on my ideas collectively from different sources. The specific post from @BlueBolts here: http://shrimpkeepersforum.com/forum/topic/1415-breeding-rack-no2/ has inspired me greatly and I would like to acknowledge that.
I followed the DIY rack build as outlined here: http://shrimpkeepersforum.com/forum/topic/7063-diy-rack-for-under-50-in-under-2hrs/
The plan, materials, and costs
This rack will be located in the lounge room so it has to be 'display-ish' quality and light from it must not interfere with the TV or be too blinding to people sitting around the lounge room. Also, no unsightly hoses/pipes are to be seen. I managed to convince the Minister for Home Affairs that a canister filter and chiller by definition, is not categorised as hoses or pipes, and would be in no way unsightly. The LED display from the chiller would provide subtle mood lighting, and the gentle humming of the filter and soft soothe whirling of the chiller fan would be therapeutic for lounge surfers, and would also greatly enhance movie watching experience with enriched sound depth and effects.
Hence I received approval to have a canister filter and chiller located next to the rack.
I used 5 x 5.4m long 90x45mm MGP10 untreated structural pine bought and cut to size from Masters for $83.75. I find Masters generally sells timber cheaper than Bunnings. Since I have both of them close to where I live, I selectively buy what I need from where it is cheaper.
The frame is held together by 10-8 x 75mm zinc plated countersunk screws. I bought a box of 250 screws from Bunnings for $27.50.
The rack measures 1390 x 420 x 2200 mm (L x W x H). The plan is to hold 2 x 2'x15"x15" tanks on the top and middle tier each, and a 4'x15"x15" hospital/quarantine/grow out/sump tank on the bottom tier.
Each tank would be insulated by 20mm foam around the sides, back and base as I plan to run both tropical (28-30 degrees C) and chilled (22-24 degrees C) tanks on this rack. Plumbing for air and sump would be hidden within the frame.
Please disregard the mess in the background. Still sorting out stuff in the garage after the move.
Hi I am new with caridinas and I want to make a shrimp rack to keep them.
It would have four shelves and in each one of them would fit an aquarium of 82.5x29.5x15'5 and I want to divide it into two or three or four partitions that water communicate between them somehow but I do not know how to do it. Some suggestions to make the dives so that water is shared among all and that the young can not pass from one to another.
I added an image where you can see how the possible divisions would be interesting to divide it into four partitions but every division is very small and I want them to be communicated to compensate that they are small aquariums and achieve a greater stability of water parameters altogether all of them.
Sorry for my English I tried to do my best because I am from Spain and I am not English speaking.
Greetings and thanks.
Green shrimp I looked at one of my green Neocaridina under the microscope, and I'm trying to determine if all green shrimp are like this... or just mine. Any insight from other green or jade shrimp keepers?