Search the Community
Showing results for tags 'filters'.
So, it's been a long time coming but Rack 2.0 is almost ready to roll. The original eight 40cm cubes were picked up in April this year. Made by Justin at Subscape Aquarium. Each cube came with cover glass and one hole pre-drilled. So I once again went with the Rack-it system from Bunnings. 900mm beams, three 40cm uprights. Also spent my time gathering the plumbing fittings and accessories. Was easier getting small amounts staggered over weeks than at one time. Was easier to stretch the dollars this way. I used 20mm PVC as a return, and then T-pieces with a 20mm Tap attached. 20mm Hose was used from here. As Squiggle has suggested many times, I replaced the mdf shelves suggested with a 18mm Marine Ply. I had the pre-cut at Bunnings as I am rubbish at measuring and cutting. Underneath each shelf I used structural pine 90x35mm pieces cut to length. They slot into the brackets relatively easily (with the help of a rubber mallet) and provide direct support for the tanks, as well as providing a space to attached hooks for lights, hoses, cords, etc. Again, staggered picking up different essentials along the way. Foam (and structural pine) Hoses