Jump to content

Neo Strikes Back


neo-2FX

Recommended Posts

After my first, somewhat successful tank, I decided to do a basic, shrimp dedicated tank. I think I will go with CRS but I'm yet to decide.

Tank - 45cm

Light - Flexi Mini

Substrate - ADA Amazonia Powder

Heater - 50W AquaEl

Filter - Dual Sponge

I'm not convinced with the Dual Sponge, may swap over to a hang on filter. The outflow tends to splash water everywhere with bubbles popping.

Happy with the heating compared with my last experience. Heater set to 23 and it's maintaining that temperature perfectly unlike my original tank with the Jager.

The ADA substrate is great, but lots of air pockets atm which I'm sure will dissipate over the coming days.

Extremely happy with the Flexi Mini, great light. Does anyone know if the part that clips onto the tank can be covered with water? Will it rust?

A few things coming soon:

1. Cholla Wood

2. Some goldvine

3. Mineral balls

4. IAL

5. Java moss

Stay tuned...

DSC04261.JPG

Edited by neo-2FX
  • Like 3
Link to comment
Share on other sites

The ADA substrate is great, but lots of air pockets atm which I'm sure will dissipate over the coming days.

 

Dig your fingers in to the substrate and rake it to get the bubbles out. Otherwise the bubbles will stay there for ageesss.

  • Like 1
Link to comment
Share on other sites

  • HOF Member

I run 2 x double sponges in all my tanks and I'm very happy with them once you get past the fact that you can see them! The babies really love grazing on them and I find they circulate the water quite well without being too strong for the shrimp to swim in. My tanks are 60 litres and you can see the plants swaying in the turbulence .

  • Like 3
Link to comment
Share on other sites

I run 2 x double sponges in all my tanks and I'm very happy with them once you get past the fact that you can see them! The babies really love grazing on them and I find they circulate the water quite well without being too strong for the shrimp to swim in. My tanks are 60 litres and you can see the plants swaying in the turbulence .

Do you have your output from the sponges above the waterline or below @ineke?

Link to comment
Share on other sites

I just did a massive trim of my tank this weekend, I have the cuttings in a bucket currently.  All mosses, all mixed, all yours for free if you want them (disclaimer: the tank has BGA and snails, so would need some bucketing/treatment before using in your tank).

There's a lot of weeping mosses, there might be some rose moss (but not much) and a bit of mini pelia.  PM if you're interested and I can point you towards a picture of my tank so you can see the mosses (didn't want to hijack your thread with my tank pics!)

I also run the double sponges in my 21L tank, usually with the outlet below the waterline.  I have experimented with using an extension tube with holes in it (like a flute) above the water line, but the water pressure wasn't really enough to get the effect I was looking for, and it mostly just dripped out of the first 2 holes :)

  • Like 1
Link to comment
Share on other sites

  • HOF Member

I have mine below the water line and as long as I rinse the sponges about once a month ( in the water I siphon out) the flow remains very good. They are the only filtration in 11 of my 13 tanks including my TB tanks and the water quality has remained excellent .

  • Like 1
Link to comment
Share on other sites

yesterday, setup tank with ada amazonia too

with dual twin sponge, same here, too much bubble on soil surface

mess with it would just make the water cloudy, so i will mess with the water later when i'm doing the water change

 

good luck with yours, i will ignore my tank for 2 month LOL

if u don't like the splash, just cover above the sponge with plastic food wrap

Link to comment
Share on other sites

yesterday, setup tank with ada amazonia too

with dual twin sponge, same here, too much bubble on soil surface

mess with it would just make the water cloudy, so i will mess with the water later when i'm doing the water change

 

good luck with yours, i will ignore my tank for 2 month LOL

if u don't like the splash, just cover above the sponge with plastic food wrap

Too much bubble on soil surface or water surface?

My output is at the water line and produces lots of bubbles which pop and splash water everywhere. I've lowered it now which has helped.

Link to comment
Share on other sites

Interesting so far. Already seeing Nitrites. May be attributed to the fact that I've been putting some water into the tank from my established tank. I'll be measuring parameters on the weekend. And will be squeezing some water from the filter intake on the established tank onto the new one to try kickstarting the cycle.

  • Like 1
Link to comment
Share on other sites

I'm not sure what to think of this. It's only been like 4 days!

df1b2f1a5e9043561a394336285084cd.jpg

All I've been doing is putting some water from established tank to this tank. Those kind of readings took me weeks on the original tank!

  • Like 1
Link to comment
Share on other sites

  • 3 weeks later...

It's going well! Just waiting for Nitrites to drop off. My cycle had stalled because of low pH. Was too busy with work etc. and lost track of it. pH back up now and have put temp to 28 so hopefully the cycle should finish soon.

Link to comment
Share on other sites

Just waiting for some Pogo Helferi and Mini Java Fern now.

Will also be putting some AR Mini in there when it grows, thanks @GotCrabs!

Can't wait to get some of @newbreed's TB's in here! I also swapped to the aPump which I won at auction. It's super quiet, can't even hear it. Thanks again Jamie.

Link to comment
Share on other sites

It's all coming together slowly. A CRS and my remaining Chameleons in there as a test before TB's. Also got some AR Mini and Pogo Stellata.

4ab02e5a930c291fd684e0eec582509f.jpg
Link to comment
Share on other sites

Is that the AR mini I gave ya?

Nope, that's in the main tank. It's only just taking root now so I'm sure it'll grow like crazy in the next couple weeks.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Join Our Community!

    Register today, ask questions and share your shrimp and fish tank experiences with us!

  • Must Read SKF Articles

  • Posts

    • beanbag
      Update to say that after a few gravel vacs, front wall scrub, moss / floating plant trim, that the condition seems to have improved.  My current theory is that it is due to waste / debris management, where "stuff" like that brown mulm accumulates in the substrate and behind the HMF filters.  Maybe some tanks can somehow deal with it, but mine can't.  Also another experienced shrimper suggested that maybe those "shell bugs" don't just live on the shrimps but also in this debris.  Maybe this is the reason some tanks fail due to "old tank syndrome" where all they need is a good gravel vac? Also, I am guessing that plant trim helps too because now more of the nutrients and light go into growing algae instead of more plants? Well anyway for this tank I will try weekly water change and monthly gravel vac / plant trim.  For my next tank, I'm thinking of something like an under-gravel system where this mulm can fall down and I vac it out.
    • sdlTBfanUK
      Good to have an update and good to hear you are getting shrimplets, so hopefully your colony will continue and you may not get to the point where you have to cull some to stop over population. These type of shrimp only live 12 - 18 months so the adult deaths may be natural? If you have the time I would do weekly 25% water changes, adding the new water via a drip system and do some vacuuming clean of the substrate each week, even if only a different bit each week! See if that helps in a few months and if it does then stick with that regime? It should help reduce any build-ups that may be occuring!
    • beanbag
      Hello again, much belated update: The tank still has "cycles" of 1-2 month "good streaks" where everybody seems to be doing well, and then a bad streak where the short antenna problem shows up again, and a shrimp dies once every few days.  I am not sure what causes things to go bad, but usually over the course of a few days I will start to see more shrimp quietly standing on the HMF filter, and so I know something is wrong.  Since I am not "doing anything" besides the regular 1-2 week water changes, I just assume that something bad is building up.  Here's a list of things that I've tried that are supposed to be "can't hurt" but didn't prevent the problem either: Dose every other day with Shrimp Fit (very small dose, and the shrimp seem to like it) Sotching Oxydator Seachem Purigen to keep the nitrates lower Keeping the pH below 5.5 with peat Things that I don't do often, so could possibly "reset" the tank back to a good streak, are gravel vac and plant trim, so maybe time to try those again. One other problem I used to have was that sometimes a shrimp would suddenly stop eating with a full or partially full digestive tract that doesn't clear out, and then the shrimp will die within a few days.  I suspected it was one of the foods in my rotation - Shrimp Nature Infection, which contains a bunch of herbal plant things.  I've had this in my food rotation for a few years now and generally didn't seem to cause problems, but I removed it from the rotation anyway.  I don't have a lot of adult Golden Bees at this point so I can't really tell if it worked or not. Overall the tank is not too bad - during the good streaks occasionally a shrimp will get berried and hatch babies with a 33-50% survival rate.  So while there are fewer adults now, there are also a bunch of babies roaming around.  I guess this tank will stagger on, but I really do need to take the time to start up a new tank.  (or figure out the problem)
    • jayc
      If that is the offspring, then the parents are unlikely to be PRL. I tend to agree with you. There are very few PRLs in Australia. And any that claim to be needs to show proof. PRL genes have to start as PRL. CRS that breed true after x generations doesn't turn it into a PRL. Neither can a Taiwan bee shrimp turn into a PRL despite how ever many generations. I've never seen a PRL with that sort of red colour. I have on Red Wines and Red Shadows - Taiwan bee shrimps. So somewhere down the line one of your shrimp might have been mixed with Taiwan bees and is no longer PRL. It just tanks one shrimp to mess up the genes of a whole colony. 
    • sdlTBfanUK
      Sorry, missed this one somehow! The PRL look fantastic and the odd ones look part PRL and part Red wine/Red shadow in the colour. They are still very beautiful but ideally should be seperated to help keep the PRL clean if you can do that.  Nice clear photos!
×
×
  • Create New...