Jump to content
Sign in to follow this  
neo-2FX

Tank Temperature Help

Recommended Posts

DemonCat
40 minutes ago, jayc said:

Don't forget, pumps from filters will also add a degree or two to the overal temperature.

Thanks for the tip. 

I also set it up without thinking... does it matter if the heater is on the inlet side or outlet side of the filter? 

Its currently sitting next to where the water gets sucked up. I can always change it around if its an issue. I had a look online and it appears it does not really matter but as always come to you guys for help!!

Share this post


Link to post
Share on other sites
jayc
22 minutes ago, DemonCat said:

I also set it up without thinking... does it matter if the heater is on the inlet side or outlet side of the filter? 

Outlet side is usually preferred, as the outlet pushes the heat around the tank and even distributes the heat.

Share this post


Link to post
Share on other sites
FMuscle

I have mine in the sump in the last section with the return pump, same result warm water gets distributed around the tank. I also have a remote temperature sensor connected to a heat/chill controller. the sensor is in the middle of the tank between the return and the inlet so it gets a reading of the average temperature in the tank.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Similar Content

    • revolutionhope
      By revolutionhope
      Greetings good folk of SKF,
      I'm interested to know what people's experiences are with keeping shrimps at higher than normal temperatures?
      My cherry cull tank had to endure temperatures between 28-35 for several days in a row this summer. All remaining berries were dropped at this time but some of them seem to be in good health still, while others have perished. There are a few batches of juvies in there at the moment and as they mature I am just curious whether the survivors were to breed again and then later generations were forced to survive the summer again and the process repeats over the course of a few years etc etc then to what degree might it be possible to breed a cherry shrimp at is "built for aussie conditions"?
      Keeping shrimp cool can be an expensive and/or hobby-killing exercise and in my opinion it would be a great thing for them to comfortably survive temps in the low 30s (or higher).
      I also know that the person i got my CRS from have told me that they had handled 28C safely at least for short periods. The ones that I got from him coped with several afternoons that reached 27 even briefly reaching 28 - and breeding didn't seem to be effected at all. Could anyone guess how much further the envelope may be pushed?
      love n peace
      will
    • revolutionhope
      By revolutionhope
      hey all,
      i'm just hoping to get some quick feedback/advice on what is the ideal temperature to keep bee shrimp aquariums to facilitate optimum health and frequency of bonking and baby survival :-)
      cheers :-)
      love n peace
      will
    • revolutionhope
      By revolutionhope
      Hi all,
      as subject says - i want advice on what are good thermometers and where to get them please :-) the most important thing for me is to get an accurate room/ambient temperature thermometer (actually i want 2 - 1 for either end of my room. advice on a good "in tank" thermometer would be appreciated too but i am on a budget so this is less of a priority.
      thanks :-)
      love n peace
      will
    • Matuva
      By Matuva
      Actually, it's pretty cold here. During the day, temperature is around 23°C, and drops down to 12-14°C during the night.
      In my tanks, temperature swings from 15 to 20°C
      A breeder told me I should not let my temperature swing that way, that I should use heaters to maintain a study temperature with a 1°C max swing.
      What do you think? I thought this should be a good thing to have this gap of several degrees between night and day, same as in nature? Am I wrong?


  • Join Our Community!

    Register today, ask questions and share your shrimp and fish tank experiences with us!

  • Posts

    • sdlTBfanUK
      I would imagine that the crabs will eat dead shrimps, even shrimps eat dead other shrimps, as they are both scavengers. Not sure that they would attack a live shrimp but it is probably best t keep a close eye on what happens before getting any more of either shrimps or crabs for that tank! Simon
    • Grubs
      I think the live shrimp will be fine.  The micro-crabs are delicate creatures taking advantage of a rotting corpse. I'm sure the crabs will enjoy the protein.  Ordinarily I avoid feeding dead livestock to other livestock to prevent transmission of disease or unknown parasites although I will say as a shrimpkeeper the temptation is strong. 😄
    • kms
      Yesterday I put a 3 new shrimps in the tank, and one dead shrimp that was DOA in the bag, nothing happened to the 3 shrimps, but the dead shrimp was swarmed by 3 crabs as food, would you presumed the live shrimps might get attacked soon or later.
    • Lizzy
      Thanks so much for all the info guys. I’m very appreciative!  I’ll update once I get the RO going. Fingers crossed I don’t kill them all 😅 I’m really hoping this will encourage more breeding. In saying that, I have 3 berried as of the last week, which is pretty exciting. 
    • jayc
      No! It's like salt. Does salt go off? Unless moisture and water has got into the container, it should last until the container disintegrates.   Add a bit of Salty Shrimp GH+ into the RO water (go slow), stir it in, until  it reaches 150 TDS. Keep measuring with the TDS meter you are getting. Doesn't have to be exactly 150 as Simon said.    If you have the tools for it and the patience, that is the best way. Or if you are like me, impatient, I add 25% of the new change water back into the tank every 20-30 minutes. So over the span of 2hours or so.
×
×
  • Create New...