Jump to content
Sign in to follow this  
jc12

Fish and Shrimp Rack Build - First Attempt

Recommended Posts

jc12

I have been a long time lurker on this forum and have learnt a lot from past and present members who have contributed to this forum. Thank you.

This is my first 'real' post and I hope this would help anyone who might be considering building a rack themselves. As requested by @Disciple, hope this helps you too.

Just a bit of background on my experience. My only previous build attempt was for a stand and sump for a 4x2x2. It was my first build dabbling with staining wood and using silicon for sump baffles, etc. As you can see from the photos below, they are pretty amateurish but I am happy for how it turned out as a first attempt. Next step is to fit some doors to it.

The stand was built following this video by King of DIY. https://www.youtube.com/watch?v=jN4Y9AYuwcQ

Anyway, this gives you an idea of the level of experience I have before I embark on my ambitious attempt to build a rack.

Below are some photos of my 4x2x2, sump and stand build, and some of its inhabitants. Sorry they are not shrimp related and not of great quality taken using my phone.

 

Stand and sump

i-LTrnt4m-M.jpg

 

Filled up and planted.

i-fZ6d2q9-L.jpg

 

Display tank front view.

i-KcVPvCB-M.jpg

 

Display tank side view.

i-Q3Pt8fW-M.jpg

 

With background in place and tank inhabitants added consisting of altum flora discus, german blue rams, panda corydoras, cardinal tetras, otocinclus, red cherry shrimps, darwin algae shrimps and darwin red nose shrimps.

i-RTpDk7X-M.jpg

 

Altum flora discus.

i-rXFzpHr-L.jpg

 

Panda corydoras.

i-PS4pbTm-L.jpg

 

German blue rams with their fry.

i-Bnrj3Wn-M.jpg

 

I have browsed many build threads including some from here and have built on my ideas collectively from different sources. The specific post from @BlueBolts here: http://shrimpkeepersforum.com/forum/topic/1415-breeding-rack-no2/ has inspired me greatly and I would like to acknowledge that.

I followed the DIY rack build as outlined here: http://shrimpkeepersforum.com/forum/topic/7063-diy-rack-for-under-50-in-under-2hrs/

 

The plan, materials, and costs

This rack will be located in the lounge room so it has to be 'display-ish' quality and light from it must not interfere with the TV or be too blinding to people sitting around the lounge room. Also, no unsightly hoses/pipes are to be seen. I managed to convince the Minister for Home Affairs that a canister filter and chiller by definition, is not categorised as hoses or pipes, and would be in no way unsightly. The LED display from the chiller would provide subtle mood lighting, and the gentle humming of the filter and soft soothe whirling of the chiller fan would be therapeutic for lounge surfers, and would also greatly enhance movie watching experience with enriched sound depth and effects.

Hence I received approval to have a canister filter and chiller located next to the rack.

I used 5 x 5.4m long 90x45mm MGP10 untreated structural pine bought and cut to size from Masters for $83.75. I find Masters generally sells timber cheaper than Bunnings. Since I have both of them close to where I live, I selectively buy what I need from where it is cheaper.

The frame is held together by 10-8 x 75mm zinc plated countersunk screws. I bought a box of 250 screws from Bunnings for $27.50.

The rack measures 1390 x 420 x 2200 mm (L x W x H). The plan is to hold 2 x 2'x15"x15" tanks on the top and middle tier each, and a 4'x15"x15" hospital/quarantine/grow out/sump tank on the bottom tier.

Each tank would be insulated by 20mm foam around the sides, back and base as I plan to run both tropical (28-30 degrees C) and chilled (22-24 degrees C) tanks on this rack. Plumbing for air and sump would be hidden within the frame.

 

Please disregard the mess in the background. Still sorting out stuff in the garage after the move.

From this:

i-nKg3njm-M.jpg

 

To this:

i-gLwKGLN-L.jpg

Edited by jc12
  • Like 5

Share this post


Link to post
Share on other sites
kirrily_ann_hans

that looks awesome I have only spit a 3ft tank ino 3s before but never built my own stand ect

  • Like 1

Share this post


Link to post
Share on other sites
larrymull

Looking forward to this journey @jc12

  • Like 1

Share this post


Link to post
Share on other sites
jc12

My 'allocated' footprint in the lounge for the rack only allows a maximum depth of 450mm. In order to maximise tank size/volume, I would have to drill and sump from the side instead of the back of the tanks.

The first challenge was to find low profile bulkheads to fit within the confines of the 45mm thick frame so I can keep all plumbing enclosed. Since I will be insulating the tanks with 20mm foam and allowing another 10mm clearance, I need to find a bulkhead and tee fitting that does not exceed 75mm long.

 

The bulkheads commonly used for tanks are like this which is too big once you add on a tee fitting to allow to drain to sump.

i-HkCGZJ6-S.jpg

i-fNdwbkR-S.jpg

 

However, Bunnings sell another type of bulkhead that looks like this.

i-XGKr2Vj-S.jpg

 

Coupled with a 25mm barbed x 20mm BSP male threaded tee like this, I get a 20mm bulkhead with a 25mm outlet to sump and all this measures around 65mm. The female thread on the bulkhead also allows me to fit a stainless steel strainer to prevent fish/shrimps from taking a holiday in the sump.

i-QH29krn-S.jpg

 

All images were shamelessly copied from the internet. All credit goes to the original owners of these images.

Edited by jc12
  • Like 3

Share this post


Link to post
Share on other sites
buck

looks like a good start!

the 4x2x2 looks beautiful! :wow:

  • Like 2

Share this post


Link to post
Share on other sites
Disciple

Thanks a lot @jc12 i am already picking up a few ideas.

Looking forward to the updates.

  • Like 1

Share this post


Link to post
Share on other sites
jc12

Thank you all for the kind words.

I decided to use 9mm thick MDF for the exterior of the rack. There would be a couple of openings at the top of the rack to allow moisture/heat to escape so hopefully the MDF would not warp over time. Coupled with an undercoat and a few layers of paint, I hope the MDF would be well and truly sealed.

 

Cutting up the MDF boards to size.

i-hfQQRpZ-M.jpg

 

Fitting them on.

i-NMcw9qQ-L.jpg

 

Couldn't find the type of hinges I wanted so thought I'll give these ones a go. I am thinking of having some aluminium trimmings on the edges as well. Oh well, I'll decide on them after the painting is done.

i-kxxxPJ5-L.jpg

i-vzk3zNR-L.jpg

 

Not only am I gifted in rack building, I am also highly skilled in producing complex engineering drawings that were meticulously drawn to scale. Armed with these drawings, I went to the tank builder who has no issue whatsoever understanding these immensely technical but high quality drawings.

i-6GvHVgV-M.jpg

i-KHjVBjb-M.jpg

 

He got to work right away.

i-B8wJpFG-S.jpg

Edited by jc12
  • Like 2

Share this post


Link to post
Share on other sites
Disciple

Wow Man 

This looks awesome. Good work.

  • Like 1

Share this post


Link to post
Share on other sites
fishmosy

Great work mate. Cant wait to see it all done. 

  • Like 1

Share this post


Link to post
Share on other sites
larrymull

Loving this!

  • Like 1

Share this post


Link to post
Share on other sites
jc12

I think planning and putting ideas down on paper is important and helps minimise errors. I do accept there'll be some 'oops' moments but hopefully with a good plan, such moments could be greatly reduced.

Every trip to Bunnings/Masters was an inspiring scouting trip for items I could potentially use in the build... timber, board, screws, plumbing, etc. I keep an Excel spreadsheet to document materials (including number of screws... haha), costs, dimensions, calculations, and even stocking list. Yes, I am a geek and I love my Excel. Haha. I plan what will be going in those tanks, flora and fauna, right down to the exact quantity... haha. Oh dear... I am getting a new perspective of myself.

Some of the calculations I do include stocking level (species specific) for tank volume, sump volume to allow for overflow in power outages, water level in the tanks so water line would be hidden, dimensions to hide the plumbing and insulating foam, sump media volume, even the baffle height in the sump to accommodate those ridiculously long Eheim Jager heaters (i.e. Pythagoras theorem in 3D) so that if the return pump runs dry, the heater would still be submerged in water to prevent overheating and potentially shattering the glass element.

I am also building up plans for a semi-automated water change solution out of 2 x 200L water drums. This could possibly be for another post when I get to it.

Anyway, ideas started building in my head in May this year. The actual build only started in late June. It has been a slow process trying to juggle between family, full-time work and part-time uni (including those bloody exams).

This is where I am now. An undercoat was applied early this week and the rack is ready to be painted. Tanks have been made and ready for pick up. We are at the end of July. Yes I am slow. Haha.

 

Taken the rack apart to apply an undercoat.

i-n5X5bws-M.jpg

Edited by jc12
  • Like 2

Share this post


Link to post
Share on other sites
larrymull

@jc12 what was the cost of the tanks out of interest?

 

Share this post


Link to post
Share on other sites
jc12

@jc12 what was the cost of the tanks out of interest?

 

PM sent. I didn't think I should openly disclose prices in case it was a special deal only for me. Just wanted to respect the tank builder.

  • Like 1

Share this post


Link to post
Share on other sites
inverted

Looks great so far! How are you getting flow between the partitions?

Share this post


Link to post
Share on other sites
jc12

Looks great so far! How are you getting flow between the partitions?

There is a 1" gap at the base of the dividers and hopefully with a 2-3" substrate depth, the flow would not be too restricted. I would probably also try running multiple intake and return via a canister filter. Each section will also run a sponge filter. It'll be a bit of trial and error as I have never ran a divided tank this way.

Share this post


Link to post
Share on other sites
Foxpuppet

Subscribed!

  • Like 1

Share this post


Link to post
Share on other sites
kizshrimp

Great looking build! I have 2 little racks using those low profile bulkheads, save the day don't they.. 

  • Like 1

Share this post


Link to post
Share on other sites
jc12

I had a kiddies birthday party playing cricket at the park this weekend so didn't get much done. Still I managed to pick up the 2' tanks and made it to Bunnings to buy the paint for the rack. Still waiting on the 4' tank to be made for the bottom tier.

 

Apologies for the photos as it was pretty late at night but I couldn't resist myself. Haha. I just have to see if they all fit on the rack as planned. Very happy. :happy:

i-nWxVzsN-L.jpg

i-DmDCjCh-L.jpg

 

A closer look at the shrimp tank that I hope to house CRS, BB, KK/Panda and RR/WR for selective breeding.

i-HDdZ6Cw-M.jpg

 

Dry fitted the low profile bulkheads to make sure they fit in the drilled holes and that the tee joint fits within the confines of the rack. This is how they look. I'll be sure to use plumbing tape generously to ensure there'll be no leaks when I do the final install.

i-m8PBn87-M.jpg

i-mZBh6JD-L.jpg

 

I am quite happy with how they all came together so far. Just need to try get off work early enough so I could paint the rack in the evenings.

Edited by jc12
  • Like 1

Share this post


Link to post
Share on other sites
jc12

Some plumbing bits have been ordered and is in the post. I find Dural Irrigation to be well priced and free post to boot. What better way to get things done from the comfort of my home in this cold winter weather. :cool:

The base/insulating foam has also been ordered and they are now ready for pick up. I went with Koolfoam Ultra for both aesthetic and superior insulating reasons. It is supposed to be 35% more efficient than white EPS. Hopefully, the grey coloured foam could double up as a tank background as well.

The cold winter weather has not done much to spur me on. It is after all much warmer to sit in front of the computer for our first SKF auction than to work away in the garage. However, @buck's recent post on his rack journal inspired me to get my butt moving again.

Let the painting begin.

I forgot to mention in my earlier post that the undercoat/primer-sealer I have selected was Zinsser Bulls Eye 1-2-3 from Bunnings. This was recommended to me by the staff for my application as It is water based, has low odour and has mould and mildew resistant properties. 950ml cost $26.90 and covers 10m2.

Paint wise, I chose Dulux Aquanamel Vivid White Gloss paint to match the interior trimmings of the house. 1L could cover 16m2 and I bought 2L which cost $67.45 from Bunnings. Since I already have an undercoat, I intend to apply only 1 coat of paint to the frame and double coats for the exterior MDF claddings for a smooth finish.

 

This was the make-shift paint shop. Let's just say the family wasn't impressed the garage was occupied for an indefinite period of time. :grimace:

i-7pn5gvd-M.jpg

i-8SSK8P4-M.jpg

 

I am extremely happy with the paint. It has minimal odour and being water based, cleaning up was extremely easy.

Next step, once the paint is dry, is to move the rack in place and proceed with plumbing.

Mods, I have provided some links and mentioned some businesses which I believe do not compete with our sponsors. However, please remove them if they are not allowed. Just to clarify, I am not affiliated to them in anyway.

Edited by jc12
  • Like 2

Share this post


Link to post
Share on other sites
jc12

During the evenings over the last few days, I painted the base boards for the tanks and installed them on the rack (sorry no photos as I usually paint them after work and was too tired by the time I am done).

The show day holiday in Brisbane yesterday provided a good opportunity to work on the rack. While it was a holiday in Brisbane, it was business as usual in Logan, which suited me perfectly as I could pick up the foam and plumbing bits without taking time off work.

I was so excited when I got home and immediately went about to put things together, hence I forgot to take more photos while I was working on the plumbing.

 

I moved the frame to the lounge and after installing the sump return plumbing to the top and middle tier, I couldn't resist myself and had to install a tank and some foam temporarily just to see how they look together. Sorry for the low quality photos... the tank is on the left on the middle tier. You can also see the painted base board for the 4ft tank on the bottom tier.

i-zTzZ4Nr-L.jpg

 

20mm stainless steel strainer to 25mm drain.

i-K8TQhht-M.jpg

i-gGkRsfN-M.jpg

 

I am planning to run 12 sponge filters from a circuit constructed using 19 mm poly tubes that will be driven by a Resun LP-20  that is placed on top of the frame (top left in the photo below). The LP-20 is placed on a piece of carpet to help further dampen any vibration.

i-kdSVLVQ-L.jpg

 

A closer look this morning... the poly tube that runs across the length of the rack is for air while the other is for sump return via 19mm poly tubes reduced to 13mm inline taps.

i-KJkg3mX-M.jpg

 

This goes to the air pump (not connected yet).

i-TsG7FDC-L.jpg

 

Greatly appreciate any comments or suggestions for improvements. Thank you.

Edited by jc12
  • Like 2

Share this post


Link to post
Share on other sites
fishmosy

Ohhh getting close to having the tanks running now. Exciting.:aha-!:

 

I like the white paint. Always used black myself. 

  • Like 1

Share this post


Link to post
Share on other sites
NoGi

Wow, makes me wish I had room to do this too.

  • Like 1

Share this post


Link to post
Share on other sites
Disciple

Looking Great JC.

Now if I ever convince the wife to let me get a new set up. I'll have to get you to fly over and help me make something similar! lol

  • Like 1

Share this post


Link to post
Share on other sites
buck

Looking great mate! 

  • Like 1

Share this post


Link to post
Share on other sites
jc12

Wow, makes me wish I had room to do this too.

Make room. Sell the car and free up the garage??? :grimace:

Looking Great JC.

Now if I ever convince the wife to let me get a new set up. I'll have to get you to fly over and help me make something similar! lol

I showed my wife the photo of BlueBolt's rack and convinced her I would try my best to make it look that pretty. That was how I got permission and 'acquired' some space in the lounge room. Haha.

Edited by jc12

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Similar Content

    • Crabclaw
      By Crabclaw
      Hey guys, I’m going away for a few weeks and having a neighbour take care of my tank, as they are already gonna be caring for my cat during that period. I’ll be away for 2 and a half weeks, so not a huge amount of time, but the neighbour doesn’t have any experience with fish or shrimp tank maintenance.
      The tank will be fine without a water change during that time as long as I do one before I leave, I know that, but my 2 main problems are feeding and stopping my intake sponge from clogging up.
      For feeding I was considering getting a couple of pill boxes, like the ones that have seperate compartments for each day of the week, so I can set a certain amount for each day, and which foods.
      But for the intake sponge, I’m pretty stumped. My current intake is a sponge filter connected to the intake pipe, but it’s been clogging up once or twice a week due to how fine it is (and how messy my fish are). When it’s clogged, it puts strain on the canister filter’s motor, and that’s not good. I don’t trust her with cleaning it safely, plus I’m only paying her for 5 mins in the morning, and 5 at night. I’ve considered a mesh intake, but it looks like it could hurt a fish if it went past it quickly... plus I can’t check the size of the inside where the pipe could go as the only one I’ve found would have to be posted.
      Are there easy alternatives that I wouldn’t have to mod, or do intake sponges come in courser versions? (I haven’t checked).
       
      Any input would be appreciated!
       
    • Crabclaw
      By Crabclaw
      Hey guys, I’m really wanting to get freshwater crabs, and the only ones I’ve found are A. Lacustris and A. Laevis. I can only put them in a 110 L community tank for now, but may have another option in the future. The tank is stocked with a large school of ember tetras, some rocket killies, some endlers, some tangerine tiger shrimp, and a pair of apistogrammas. Rare aqua advised that A. Lacustris would likely be eaten by the apistos, so the obvious choice would be A. Laevis, because they’re larger... right? But I’m worried that they might predate upon my shrimp, so wanted to hear some advice and opinions from more people with experience keeping these crabs.
      Cheers!
    • Crabclaw
      By Crabclaw
      Hey guys, I’m really wanting to get freshwater crabs, and the only ones I’ve found are A. Lacustris and A. Laevis. I can only put them in a 110 L community tank for now, but may have another option in the future. The tank is stocked with a large school of ember tetras, some rocket killies, some endlers, some tangerine tiger shrimp, and a pair of apistogrammas. Rare aqua advised that A. Lacustris would likely be eaten by the apistos, so the obvious choice would be A. Laevis, because they’re larger... right? But I’m worried that they might predate upon my shrimp, so wanted to hear some advice and opinions from more people with experience keeping these crabs.
      Cheers!
    • bristlenose
      By bristlenose
      Hi, I've kept Red cherry shrimp for at least 3 years. I've never had a problem with them. I used to keep my shrimp in 500l tank but i got careless while buying plants and introduced planaria into my aquarium. I only noticed after the numbers got out of hand and i noticed the shrimp deaths adding up. I moved 200-300 shrimp into a standard 4ft tank planted aquarium and dosed with noplanaria along with melafix to ward off any bacterial infections. There were multiple dozens of shrimp shells all over after being moved. Initially i believed it may have been the planaria/bacterial/constant water changes/stress of new environment(i drip acclimated them for a 5 hours) that was killing them but i haven't changed the water in a 2 months but i still get the occasional death, 1 or 2 every few days. There are decent amounts of cuttlebone in the filter and also in the aquarium itself, and i also feed them the occasional powdered egg shells but i still get molting problems. Adults and also the month olds are dying, no discrimination. They're fed every other day shrimp snow, high protein discus granules and zucchini/pumpkin/spinach/dry seaweed every 3-4 days. I can see many berried females and small shrimp and also babies but i'm still losing shrimp constantly, easily 80+ in total. I don't want to buy a gh/kh test, they have never had any problems with molting in their last aquarium so can't quite understand why they're having problems now in the 150l. I've read so much online but i can't seem to find an answer, i'd sincerely appreciate any advice i can get. Thank you so much if you've managed to read all of this. Please feel free to ask any questions. The photo is from the current setup they're in.
      Previous tank parameters:
      Ammonia: 0 
      nitrite: 0 
      nitrates: 20ppm
      Ph: 8
      substrate: sand 
      Lighting: generic LED lights i got off ebay
      I don't know any other parameters.  cuttlebone in the tank and filter, no ferts, heavily infested with guppy grass. Large colony of bristlenose. 
      New tank parameters:
      ammonia: 0
      Nitrite: 0
      Nitrates:30-40ppm 
      co2: 3-4 bps 
      Ph: 6.5
      Lighting: generic LED lights i got off ebay
      substrate: ada aquasoil
      The new tank is heavily planted and dosed with root tabs and liquid ferts. Cuttlebone in the tank and filter. 6 large pieces of seiryu stone 17kg (i doubt they're authentic so they're some kind of limestone) Shrimp only tank
       

    • Seattleshrimp
      By Seattleshrimp
      Hi ! 
      I live in Seattle where the water is incredibly soft and I have a tap water pH of 6.7, GH of 0-1 and KH 2. My existing tank with plants already has buffered substrate. Would I have better chance of keeping CRS than RCS with my current water parameters ? Or would RCS do okay?    I do have an RO system already, and I could  remineralize my water with salty shrimp KH/GH+. Which would allow my GH and KH parameter to be okay for neocaridinas, but I already have a tank with active substrate. I’m 100% I don’t have space to set up another tank with inert substrate.    Would do you recommend ? What are pH you have successfully kept neocaridinas and have them thriving ?    Thanks ! I appreciate all the help as I am new to the hobby. 


  • Join Our Community!

    Register today, ask questions and share your shrimp and fish tank experiences with us!

  • Posts

    • sdlTBfanUK
      Those are really great photos! I especially like the established tank (last  photo) and the beautiful shrimps. I'm sure the new tank will look just as fabulous once everything grows in! It is so easy to get carried away in this hobby, how many of us have said 'just one more tank'???? I like the idea of a separate REDs tank! I just got 17 mixed red Taiwan bee shrimps this morning, acclimating those while writing this? Simon  
    • ShrimpDesigns
      Following the creation of Taiwan Bee Shrimp Tank Journal #1 (http://www.aquariumlife.com.au/showthread.php/68743-Taiwan-Bee-Shrimp-Tank-Journal), I have decided to set up another tank dedicated to Taiwan Bees. This has however ended my journey in breeding CPD's (http://www.aquariumlife.com.au/showthread.php/66596-Planted-CPD-Breding-Setup?highlight=) Equipment - PetWorx 40l tank as used in the CPD journal - Up Aqua Pro U LED Light 45cm - ADA Amazonia - Co2, yes at the moment but will significantly reduce to a very slow 24/7 bubble count once shrimp are in - Fluval C2 HOB Filter Plants - Staurogyne Repens - Buce - Dwarf Hairgrass - Mini Christmas Moss - Micro or Mini Java Fern which i might remove to make the tank look a little more minimal Shrimp - Will likely grab some culls from my other tank to see how they go with the very low co2 injection - If these go alright will attempt to line breed some really nice shadow pandas or get into wine reds Planting Stage l Approx 1 Week After Planting Potential Inhabitants All from this tank!
    • sdlTBfanUK
      OK, I'll get the shrimps in today and then at the weekend I will take a few pictures! Simon
    • Grubs
      Pic of the tank?
    • sdlTBfanUK
      I added some blue bolt shrimps about 2-3 weeks ago and they seem to be doing well! The stringy algae seems to have cleared, the tank is still a bit drab but I think it is going greener as well. Yesterday I ordered the red shrimps and am just awaiting them to be delivered later today: All going well (fingers crossed) that should be it all done now! I don't see many of the first couple of batches in the tank but I am not convinced the tank was really ready enough which would be my misjudgement, I used a different substrate, and I bought the shrimps from a shop, but I am not sure what the reason was so not prepared to 'blame' anyone else! I MAY consider getting some more from the shop but I have enough really but would like a few red wine (normal grade) or black bee mixed grades so we will see on that? These shrimp (and the blue bolts previously) came/are coming from Shrimp Corner in the UK (they sent me these pictures) which seem to be an enthusiast/business so they come directly from them (breeder) and the previous delivery was well packaged (too bloody well resulting in many swears at the time) and lovely colours and patterns. They seem to be specialising in the higher grades and especially galaxy etc. 2 days ago they won at the European shrimp cup for their red steel so they are definitely enthusiasts and I have received top quality service thus far - probably tempting fate to say this whilst awaiting a delivery, d'oh!  Anyway, big day for me today, woohoo! Simon
×
×
  • Create New...