Report
-
Similar Content
-
By Josh16622
Has anyone successfully made a DIY remineralizer like Jay's one but for sulawesi? I'm interested to know, because if possible I too would want to make my own, but if nobody has experience with it, I'll get the Salty Shrimp mineral for sulawesi.
-
By Patrick Gagnon
I recently put in an order for 12 blue dream and 12 cherry shrimp. The shipping was delayed, Harrisburg PA distribution is terrible. Took over 9 days for them to arrive. 0 DOA. Nice! Anyway I've had them now for I'd say 2 weeks. One already is pregnant! And I recently found a guest staying. I have copepods all over, I heard they are fine. I'm not sure what this is. Looks to have antennas, like a snail or something.
-
By Adam Bomb
Hello everyone!
My area of Michigan (48065) seems to be a black hole for shrimp enthusiasts, and my hope was to uncover folks I can buy shrimp (and hopefully moss) from locally. Since the pandemic has paused all face-to-face meetings for local clubs until further notice, it's been rough (and I can't imagine paying online retail ridiculous prices for shipped shrimp)!
Since we only have the "City" field (for location) on profiles, is there a better way to find local people? I'd love any help you can offer.
-
By Subtlefly
Hi Team,
So here is the list of what has been purchased
900x400x200 PPG starphire glass rimless tank (custom build) 10mm glass
Flat one ONF+ warm white 60 cm pendant light (rated for 17 to 20 gallons - so hopefully can put it high and it will be bright enough! - the 90cm is rated for 40 to 48 gallons)
Eheim ecco 130 filter
Seachem Matrix (for the filter)
DOOA Stream Pipe ARC P-2 (13mm)
DOOA Stream Pipe V-1 (13, H15mm)
ADA power sand advance 2 kg
ADA amazonia fine granules 9L
ADA amazonia II (with extras) 9L
ADA cube garden mat 8mm 900x450 ( will have to trim it)
Seachem flourishm liquid fertiliser
I think other than some tweezers and curved scissors that is it so far.. I will start to post pics when the tank arrives!
Thanks and have a great day
sub
-
By Crabby
Okay, so the title pretty much says it all... One of my berried tts just moulted, and she left the eggs in the moult. What happened, and why?
I'm going to try to save the eggs with some sort of extraction, and I'll be very careful. She was pretty far along. I think I'll use the net over bubbler method. Does anyone have experience with this, and particularly the extraction? I won't do anything until I have some idea to go off.
Thanks in advance.
Crabby
Oh and the moult is under like 2 hours old. Wasn't there when I started watching a movie, was there when I checked back after.
Going off this video:
Hoping the process will be similar.
-
-
Must Read SKF Articles
-
-
Posts
-
-
-
-
By jayc · Posted
Sorry, I'm not in that area. 🙃 I prefer Glass tanks. Acrylic scratches way too easily. Often while cleaning algae off the sides. And once it's built up enough scratches, viewing gets obstructed. Often going with LARGE tanks, you start to fall into custom built stands. So don't be surprised if you cannot find anything suitable. -
By sdlTBfanUK · Posted
The easiest way wouod be to go to an aquarium shop and get a tank with a cabinet made for that tank, as that should be able to support the weight, as water in any large quantity is very heavy. I suspect it would have to be a glass aquarium at that capacity, otherwise the plastic would have to be very thick. It is possible to use a non aquarium specific piece of furniture but as you say it is quite risky, though I did help a friend do that by strengthening a nice decorative piece of furniture they had that they wanted to put a 350L tank on. It has been doing the job for 10 years but also bear in mind water marks, and we had to varnish many coats to make sure water doesn't soak into the wood etc. Its not really worth it in reality, it cost a lot of money to buy all the wood/stuff to strengthen it so was probably no cheaper, and a lot of time doing it. It may be dearer to get a combo tank and stand but much much easier and safer, and only you can know what ones you llike the appearance of? I would start off going to local stores and seeing if they have any you like, and even if not it will give you ideas?
-