Jump to content
Sign in to follow this  
wot_fan

wot_fan's 1st shrimp tank

Recommended Posts

Disciple

I have read that once you can see eyes in the eggs that they will hatch soon.  I have also read that shrimp carry eggs for about 28 days.  When I took the shot she had only been carrying for 14 days.  Not sure what to believe.

 

From my experience once you see the eyes they usually hatch within the week but as you have said it is usually up to 30 days. It should be quite interesting to see when she pops.

 

 

I have to say it feels great.  I can't believe how neat the little guys are.  I spend a good deal of my tank watching time looking for a shrimplet.  I don't often find one, but when I do it always makes me smile :D.

Yeah after a stressful day at work and once I put the kids to bed i'll spend about 30 to 60 mins staring at the shrimp tank. I find it quite relaxing just looking at them swim around lol.

  • Like 1

Share this post


Link to post
Share on other sites
Shrimpy Daddy

 

I have read that once you can see eyes in the eggs that they will hatch soon.  I have also read that shrimp carry eggs for about 28 days.  When I took the shot she had only been carrying for 14 days.  Not sure what to believe.

 

What's your water temperature? 28 days is for 24C water. If it is colder, then it will be longer. And warmer will be faster. My shrimps in 26C tank hatches with 3 weeks. Given said that, different type of shrimps have slightly different incubation period too.

Share this post


Link to post
Share on other sites
wot_fan

What's your water temperature? 28 days is for 24C water. If it is colder, then it will be longer. And warmer will be faster. My shrimps in 26C tank hatches with 3 weeks. Given said that, different type of shrimps have slightly different incubation period too.

My temperature of my tank is 24°C (75°F).

 

From what I have read, many people keep their CRS at 22-24°C.  Is 26°C a better temperature to keep them at?  Or do you only keep Neos at the higher temp?

Share this post


Link to post
Share on other sites
Shrimpy Daddy

"From what I have read, many people keep their CRS at 22-24°C" <--- This is a myth I busted recently. For your case, I will suggest 25C (77F) on your new tank. Don't apply on your existing tank (unless it is just 1 degree difference). Temperature shock will kill shrimp easily. You could consider setting this in your new tank. ;)

  • Like 1

Share this post


Link to post
Share on other sites
wot_fan

"From what I have read, many people keep their CRS at 22-24°C" <--- This is a myth I busted recently. For your case, I will suggest 25C (77F) on your new tank. Don't apply on your existing tank (unless it is just 1 degree difference). Temperature shock will kill shrimp easily. You could consider setting this in your new tank. ;)

Great, thanks.  I don't have a cooler so I will have to rely on fans to cool the new tank.  It will be a lot easier to keep the water at 25°C than 22°C :D.  

 

This SKF thread is one of the places I found CRS temperature info.  You may want to share your thoughts there.  I am sure more people will read them there than here.

 

Thanks again.

Share this post


Link to post
Share on other sites
Shrimpy Daddy

Hmm... Then I will suggest you putting a heater inside to stabilise the temperature. Shrimp dies very easily with temperature fluctuation. This has been proven by myself and my friends. With heater + fan, it will ensure the temperature is stabilised. 

 

If you are planning to use heater, I will suggest you use a reliable thermometer to adjust the temperature setting. Relying on the heater's setting on the knob is a bad idea. It is never accurate.

  • Like 1

Share this post


Link to post
Share on other sites
wot_fan

Hmm... Then I will suggest you putting a heater inside to stabilise the temperature. Shrimp dies very easily with temperature fluctuation. This has been proven by myself and my friends. With heater + fan, it will ensure the temperature is stabilised. 

 

If you are planning to use heater, I will suggest you use a reliable thermometer to adjust the temperature setting. Relying on the heater's setting on the knob is a bad idea. It is never accurate.

I will be duplicating the setup I have for my Rili tank.  I will use an Omron E5CN temperature control (using a SS temp probe) to control both the heater and the fans.  I set it up so the heater comes on 0.5°F below set point and turns off at set point.  The fans come on 0.5°F above set point and turn off at set point.  

 

This winter, the Rili tank was always been between 74.5°F and 75.2°F so the E5CN is controlling the heater as desired.  Once it starts warming up, I will find out if the fans preform as well.

 

Full_Size_Render_2.jpg

Share this post


Link to post
Share on other sites
Shrimpy Daddy

Great setup!!!  :thumbsu:

Share this post


Link to post
Share on other sites
wot_fan

The fan mounting setup that I added last week didn't work as well as I had hoped.  The torque applied by the wire ties caused the thin wood I used to warp and twist.  Basically it wasn't rigid enough.

 

Below are pics of my second attempt.  I used 0.5" square dowels that are hot glued together for the frame.  I also hot glued some craft mesh between the fans to keep my cat from trying to drink from the tank.  Finally I hot glued some rubber feet to the bottom corners so the wood doesn't sit in any water that ends up on the lip of the tank.  Hopefully this attempt will work better than the last.

 

Full_Size_Render_7.jpgFull_Size_Render_5.jpgFull_Size_Render_8.jpg

It sets on top of the lights when I need to access the tank

Full_Size_Render_6.jpg

Share this post


Link to post
Share on other sites
wot_fan

I sat down in front of my tank today and saw one of the coolest things I've seen so far in this aquarium.  The berried female was sitting in the middle of the flame moss in the back right of the tank. She was only carrying about 6 eggs.  Over the next couple of minutes she periodically kicked her legs vigorously and the remaining eggs hatched.  It was over in a few minutes.  Had I sat down just a little later I would have missed it.  

 

I looked around but could only find two shrimplets.  Below is a pic of one of them.  You will have to zoom in to see him.  He is in the center of the pic. Because he is so small and I wasn't able to use my flash the picture isn't very good.  To be honest, I am happy just having any picture of a new born shrimp.

 

It has been 20 days since I first saw that the female had berried.  The eggs hatched much quicker than I expected.

 

IMG_9131.jpg

  • Like 1

Share this post


Link to post
Share on other sites
larrymull

Fantastic congrats, I am still awaiting my first hatching.

Share this post


Link to post
Share on other sites
wot_fan

Fantastic congrats, I am still awaiting my first hatching.

Thank you :D.

 

I managed to get a better shot of one my new shrimplets.  

IMG_9148.jpg

  • Like 1

Share this post


Link to post
Share on other sites
Disciple

Congrats man,

 

I guess when you do start seeing the eyes it does mean they will hatch soon. I have not been lucky enough to see them actually hatch yet. From here on in you are going to see a population boom. Once they start they don't stop lol

 

Happy for you man. Seems like this shrimplet has a nice pattern and colour. Keep it up.

  • Like 1

Share this post


Link to post
Share on other sites
wot_fan

I have almost all good news to report for the last week.  The only bad news is I lost the first female that berried for me.  She was the last sick/discolored shrimp in the tank.  Of the 13 I started with I have 6-7 remaining.

 

On the positive side, at least one of the shrimplets from the female that passed is doing well.  The batch of shrimplets that hatched a week ago are also thriving.  I have no idea how many I have, but I can usually spot 6-8 without looking too hard.  They have become more mobile which also makes it easier to spot them.

 

My remaining female has a full saddle.  I expect her to berry up any day now.  It looks like my colony actually has a shot.

 

So take the above and add it to the fact that I started a CRS tank and you can see that it has been a very good shrimp week for me :D.

 

As always, I want to thank Shrimpy Daddy for advising and educating me.  He has saved me and my shrimp a lot of stress.

 

Here are a couple of my adult shrimp (males I think)

IMG_9273.jpgIMG_9227.jpg

 

Here is the shrimplet from the female that I lost

IMG_9221.jpgIMG_9254.jpg

 

Here are a couple of my 1 week old shrimplets

IMG_9275.jpgIMG_9303.jpg

  • Like 2

Share this post


Link to post
Share on other sites
wot_fan

It has been a month since my last update so I figured it was time for another.  Everything is going good in the tank.  My female has had another batch of shrimplets though it was much smaller than the first batch.  From the first time I saw her berried she was only carrying 8-10 eggs.  She has a nice saddle again so I expect her to be berried in the next week or so.  I am interested to see how many eggs she carries this time.

 

I now have shrimplets ranging from 1 week to almost 2 months.  The tank is much more lively than it has ever been.  

 

IMG_9489.jpg

Here are a couple shots of my favorite adult male

IMG_9460.jpgIMG_9483.jpg

Some of my shrimplets

IMG_9369.jpgIMG_9373.jpgIMG_9428.jpgIMG_9435.jpgIMG_9464.jpgIMG_9478.jpg

  • Like 5

Share this post


Link to post
Share on other sites
Disciple

You are making me feeling like finding some sunkist shrimp I am really starting to like that color! Thanks for sharing.

Share this post


Link to post
Share on other sites
wot_fan

Sorry it has been so long since my last update.  The tank has had its ups and downs in the last few months but I think I have everything on track again.  

The main issue I had was low pH.  For some reason, every time I swapped out the Purigen in the tank for Purigen I had recharged, the pH would drop.  When I started losing shrimp I checked the WP and found the pH was about 5.5.  

I used aragonite to slowly raise the pH.  It has been stable for about 6 weeks at about 6.7.  I lost my remaining adults but many of the juveniles and shrimplets survived.  I would guess there are about 50 shrimp in the tank now.

The good news is the oldest of these are starting to get berried.  Two berried this weekend and there are at least half a dozen more with saddles forming.  My colony should be growing again soon.

Below are few pictures of my shrimp.  Sorry, I forgot to clean the glass before taking them.  Also, I recently fed powdered food so the water may look a little cloudy.

IMG_0481.jpgIMG_0422.jpgIMG_0430.jpgIMG_0445.jpg

Edited by wot_fan
Fixed pictures
  • Like 5

Share this post


Link to post
Share on other sites
Disciple

Great work wot_fan keep it up. Brilliant pictures as always

  • Like 1

Share this post


Link to post
Share on other sites
wot_fan

The tank continues to do well.  Since my last update, several more females have berried and several batches of shrimplets have been born.  They are still too small for me to have any idea of how many are in the tank but everywhere I look I see a few so I think there are a good number in there.

I took some pics yesterday.  Here are the best of them.

IMG_0558.jpgIMG_0552.jpgIMG_0509.jpgIMG_0514.jpgIMG_0548.jpg

Share this post


Link to post
Share on other sites
Disciple

Glad to hear your colony is recovering. The colours are getting better too. Thanks for sharing.

  • Like 1

Share this post


Link to post
Share on other sites
wot_fan

Glad to hear your colony is recovering. The colours are getting better too. Thanks for sharing.

Thanks :).  It is great to see things moving in the right direction.  

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Content

    • ohaple
      By ohaple
      Hello,
      I have recently started working towards keeping shrimp. We keep other terrestrial invertebrates (isopods, mantises, and cockroaches) and thought that shrimp would pose an interesting new challenge.
      With our mantises, we have focused on bioactive vivariums that include a cleanup crew, microfauna, and plants. That isn't the norm for mantises, but it is almost a necessity in the shrimp-keeping hobby from what I have seen. We intend to take the same approach, including heavily planted tanks, shrimp, snails, and possibly some mosquito rasboras if we are able to establish our shrimp well.
      I have some experience with aquariums through helping my dad, who has had several freshwater and saltwater aquariums. That said, shrimp are completely new to us.
      My goal is to establish two shrimp tanks, a 7 gallon and a 1 gallon. I understand that smaller is harder.
      7-Gallon Tank
      Started with the Imagitarium 6.8g rimless tank from Petco. Modified the filter system to include more biomedia and a more powerful water pump. Using Eco-Complete for substrate since it is widely recommended for planted tanks and shrimp look better on dark substrate from what I read. Using Mopani wood as our primary hardscape. We soaked it for several days prior to adding to the tank, but it continues to leech some tannins. We are trying to stay fairly focused on plants, especially in the beginning. No CO2, but we are dosing ferts and Excel. Our plants include: Bacopa as a background plant. S. repens as a mid-ground sort of plant. I plan on letting it create bushes more than creating a carpet. Micro-sword for a foreground carpeting plant. Anubias nana for mid-ground/background. I would like to add a little dwarf water lettuce but haven't yet found a source. Our plants are notably lacking moss, which I read is preferred for shrimp. We may end up adding a little java moss but I am hoping the micro-sword will give them enough surface area to be happy. Once cycled, we will be adding shrimp. We are likely going to get blue velvets, starting with 10-15. Once the shrimp are added, the fish will be moving out. To start out, we are working on cycling the tank. We used some stuff from an established aquarium and added Safestart+ to kickstart the bacteria. Keeping the tank at about 78F with a few Zebra Danios and two mystery snails to keep ammonia going while the bacteria gets established. We are dosing Prime and doing daily water changes to keep the temporary inhabitants happy. It was started about a week and a half ago, and while we aren't seeing ammonia dissipate like we want, it is steadily working. We don't plan to add shrimp until we have 0 Ammonia and 0 Nitrite.
      Here are some photos of the process and where we are now:
      First setup, keeping plants in as we get the hardscape ready

      After setting up wood and the rest of the plants

      1-Gallon Tank
      Started with a one gallon vivarium style container from Michael's Originally planned on it being a no-tech tank, but decided I would be happier with some water movement and filtration. I designed a custom water pump sponge filter. Used Eco-Complete for Substrate Using Malasian driftwood for hardscape. Sticking to fewer plants for this build to stay more organized. Monte carlo planted in substrate for carpet, and a monte carlo mat to cover up the filter. A little bush of s. repens. A small bit of anubias nana. Would like to add a floating plant, but havent been able to source any. Once cycled, I will be adding shrimp. Planning on 5 RCS or orange rili to start. Cycling this tank has been much harder so far. We added some Safestart+, but have not seen any real progress yet. I am keeping two small nerite snails in here to create the ammonia, feeding them since algae hasn't established. This tank will be much more of a custom project for us. I designed and built a 1"x2"x3" large water pump sponge filter to help the water stay a little more clear and give the bacteria some flow to process the ammonia. For the lid, we are also going completely custom, designing an acrylic and wood lid with built in lighting and containment for floating plants. We have a laser cutter and CNC so it is fun to have the lid be a separate design project. My goal with the lights is to have too much light available, and the ability to dim. That way we can grow the plants but turn down to reduce algae problems as needed. This tank will eventually go on my desk at work. Since it is a pretty professional environment, it is important that this tank isn't noisy or technical looking, and is attractive for client meetings in my office. There is a rather small available footprint which is why we went with the 1-gallon, even though it will be more challenging. So far, it looks like we are getting a little nitrite, but its slow going. Doing daily water changes and dosing Prime so we don't kill off the snails.
      Here is the custom filter. The sponge media goes in the acrylic cage, and water is pushed out the grated hole. It fits neatly behind the driftwood and is not visible except from directly in the back. The top is covered in a monte carlo mat to hide it better.


      Here it is set-up and slowly cycling. We are temporarily using a CFL hood for the light to keep the plants going well. It also raises the water temperature to about 75F, not very high for establishing bacteria.


       
      I already received some good advice from @jayc regarding how the temperature needed for Zebra Danios is lower than the recommended temperature to get bacteria growing quickly. I am hopeful that with some patience and careful monitoring, the danios will stay healthy and the bacteria will get going. I have read many articles about fish/fishless cycling and do not plan to change to fishless for this build.
      Any comments or advice appreciated. We are taking it slow, but are getting excited for cycling to complete so we can start adding shrimp.
    • Finley2
      By Finley2
      I have been using UP Aqua Shrimp Sand 1mm size for years with great success. Perfect product for me. However...
      I recently bought some from Tech Den (Australia). It was a larger size, about 2-3mm, and looked a little different.  It came in a vacuum-packed bag, instead of loose in a regular bag.  I figured it's just the larger size that I have heard about, but that it would be basically the same.  Not!  Within 90 days most of it has disintegrated to dust.  Stirring up the substrate produces dense, heavy clouds of 'smoke' - the disintegrated material. It's a disaster.
      Also the water chemistry is not quite the same. OK, but not perfect like before.
      Has anyone else experienced a change in this product, or know whether there is a fake version around?  
      Do any Australians here know where to buy the good 1mm UP Aqua Shrimp Sand, in the ordinary (non-vacuum) bag?
      Thanks.
    • Ishtarduzzie
      By Ishtarduzzie
      Hello SKF readers!
      To save me starting multiple threads and also so I know here to find answers I am doing a journal/question thread.

      If I put this in the wrong spot JayC/mods then feel free to move it or tell me to re-make :D
      Sorry.... this WILL be long probably and I appreciate any time you take to read and answer my questions!
       
      So, on Thursday (edit: tomorrow now according to an email from AU Post) I have a package coming from The Tech Den with a Aquael Shrimp Set Smart 30 and a few other goodies.
      My plans so far are:
               Iron sand (found posts saying shrimp when ok with it).... May need more than the 2kg I initially got...?          An amazing piece of Gold Vine that I found at my local pet store          The light and filter (modified) from the kit with the heater only being used in winter if needed          Filtered water (RO maybe? It is a 2 canister counter top carbon and sediment drinking water filter gifted by my mum a few months ago. Unsure brand etc) with JayC’s DIY remineraliser              IAL and alder cones         Some ceramic hidey holes         API GH/KH and Master kits         TSD pen - Xiaomi Professional TDS Meter from eBay Still need:
                 TDS pen as I forget to check the pet store and Tech Den were out – Recommendations?           Plants           Shrimp – Would like blue dreams and maybe glass shrimp           Fish – Big IF! I am worried about eating all the baby shrimp. Spotted rasbora since they are sooo tiny if any. So, according to the local store the light from the kit is pretty good and I have seen quite a few good things about the filter around YT and such. I was thinking of modifying it like this with a single though: https://youtu.be/I_ckQpO8GBo
      My old 16L (does not fit in spot and wary of using for fish since it housed mice) has been a bit of a dummy test on water temps and for the last week has been in a safe range. None of these have been 40+ days though so I will probably need to air-con or get a cooler for coming into next summer.... or something (nowhere near planned this part since should be cooling off by time cycled).
      So... to break up some questions that relate to the ‘still need’ list:
      -          I was thinking plant wise Anubias nana petite, Java fern narrow (still need to source somewhere to get... not sure local store has anything other than plain) and.... a moss...
      I was hoping for something less stringy than Java moss. It is just so..... wild lol
      Fissiden sp. ‘Vietnam’ and Mini Pellia are calling to me but are slow growers and needs med-high light and I think Co2... filter has a Co2 option if needed.... but NO clue what a 6w, 8000K LED translates to on a nano tank... and I guess that would depend on other planting...
      Also pondering about Peacock and Phoenix? But probably similar problem....
      Maybe I should just wait for if I get a bigger tank.... for anything other than Java lol *sighs*
      -          Sourcing blue dream shrimp! Your trade section does not seem to get many responses lol
      My local has glass shrimp (Australian... soooo Paratya australiensis?) who looked blue tinged at least, cherry red and cherry yello but no source of cherry blue.
      Would appreciate sources to get from Newcastle or Sydney! Gumtree makes me hesitate though I have found people with them up on there. One seems a safer bet but maybe not as easy to get to. A second one has potential and very easy for me to get to for Newcastle (no car).
      -          Now... going with plants that don’t need a planted substrate.... should I still actually go with an actual buffering/planted substrate for bacterial reasons...? Should I add hidden biomedia sock or anything like that since the bacteria won’t really colonise in a thin layer of sand, unlike a planted tank.
       
      Starting to get into the excited but freaking out I am doing something to mess it up bad stage.
      Blue dreams are more expensive than I was wanting to be learning on... but if I get red cherries that would just mean another tank later lol
    • jc12
      By jc12
      I have been a long time lurker on this forum and have learnt a lot from past and present members who have contributed to this forum. Thank you.
      This is my first 'real' post and I hope this would help anyone who might be considering building a rack themselves. As requested by @Disciple, hope this helps you too.
      Just a bit of background on my experience. My only previous build attempt was for a stand and sump for a 4x2x2. It was my first build dabbling with staining wood and using silicon for sump baffles, etc. As you can see from the photos below, they are pretty amateurish but I am happy for how it turned out as a first attempt. Next step is to fit some doors to it.
      The stand was built following this video by King of DIY. https://www.youtube.com/watch?v=jN4Y9AYuwcQ
      Anyway, this gives you an idea of the level of experience I have before I embark on my ambitious attempt to build a rack.
      Below are some photos of my 4x2x2, sump and stand build, and some of its inhabitants. Sorry they are not shrimp related and not of great quality taken using my phone.
       
      Stand and sump

       


      Filled up and planted.

       
      Display tank front view.

       
      Display tank side view.

       
      With background in place and tank inhabitants added consisting of altum flora discus, german blue rams, panda corydoras, cardinal tetras, otocinclus, red cherry shrimps, darwin algae shrimps and darwin red nose shrimps.

       
      Altum flora discus.

       
      Panda corydoras.

       
      German blue rams with their fry.

       
      I have browsed many build threads including some from here and have built on my ideas collectively from different sources. The specific post from @BlueBolts here: http://shrimpkeepersforum.com/forum/topic/1415-breeding-rack-no2/ has inspired me greatly and I would like to acknowledge that.
      I followed the DIY rack build as outlined here: http://shrimpkeepersforum.com/forum/topic/7063-diy-rack-for-under-50-in-under-2hrs/
       
      The plan, materials, and costs
      This rack will be located in the lounge room so it has to be 'display-ish' quality and light from it must not interfere with the TV or be too blinding to people sitting around the lounge room. Also, no unsightly hoses/pipes are to be seen. I managed to convince the Minister for Home Affairs that a canister filter and chiller by definition, is not categorised as hoses or pipes, and would be in no way unsightly. The LED display from the chiller would provide subtle mood lighting, and the gentle humming of the filter and soft soothe whirling of the chiller fan would be therapeutic for lounge surfers, and would also greatly enhance movie watching experience with enriched sound depth and effects.
      Hence I received approval to have a canister filter and chiller located next to the rack.
      I used 5 x 5.4m long 90x45mm MGP10 untreated structural pine bought and cut to size from Masters for $83.75. I find Masters generally sells timber cheaper than Bunnings. Since I have both of them close to where I live, I selectively buy what I need from where it is cheaper.
      The frame is held together by 10-8 x 75mm zinc plated countersunk screws. I bought a box of 250 screws from Bunnings for $27.50.
      The rack measures 1390 x 420 x 2200 mm (L x W x H). The plan is to hold 2 x 2'x15"x15" tanks on the top and middle tier each, and a 4'x15"x15" hospital/quarantine/grow out/sump tank on the bottom tier.
      Each tank would be insulated by 20mm foam around the sides, back and base as I plan to run both tropical (28-30 degrees C) and chilled (22-24 degrees C) tanks on this rack. Plumbing for air and sump would be hidden within the frame.
       
      Please disregard the mess in the background. Still sorting out stuff in the garage after the move.
      From this:

       
      To this:

    • KillieOrCory
      By KillieOrCory
      Hi all,
      As some of you know, my currently my set-up looks like this.
       
      With enormous amount of help and encouragement from my fiancee, we have now got the fishroom to this state.
      It feels awesome walking in there to play with water :o
      Amazingly for me things have not stop improving here! We are in the process of building a new house and getting a purpose build fishroom in it.
      The construction started just before Christmas last year.
       
      In this fishroom I wanted to have some of the things I wished I had or I had done in my current set-up.
      1st Priority: Insulation
      I wanted to be able to keep the room warm in winter and cool in summer with minimal power consumption. Living in Canberra we get cold winters (nights especially) and a week or two of extreme heat every summer.
      We decided to build the the whole structure; house and fishroom, with a relatively new building material suggested to us by our builder. It is a thermal facade system called 'Exsulite' it is manufactured by Dulux.
      It is a system that uses foam, foil, airgaps and various boards. It provides a lot better thermal protection than regular bricks for example.
       
      Between this system and the gyprock regular insulation batts are fitted. The whole house including the fishroom and the garage has insulation batts on the ceiling as well.
      I also decided against a door that opens to outside and windows to minimize heat loss through these.
      2nd Priority: Access to water
      I wanted to make sure I had all that I needed within the room in terms of access to water as well as getting rid of waste water. I decided to have a 42L laundry tub fitted into the room to provide all important 'cleaning' station. I no longer need to take over the laundry or worse the kitchen during certain maintenance of various fishkeeping related items.
       
      I have also got a separate tap installed next to the laundry tub to have my water reservoir line to be permanently connected to this tap. I won't need to connect and disconnect this line unnecessarily in the future.
      A center drain in the middle of the room was also a must.
       
      3rd Priority: Access to power
      As with almost everybody that is in the aquarium hobby, I always found I needed more power points than what is available around the tank/tanks. This always inevitably leads to using of powerboards, but even with using quality ones there is always potential to overload or something to go wrong.
      As much as possible I wanted to avoid using power boards and double adapters in the fishroom, though I know resistance is futile and I might resort to these at some stage.
      To ensure I have access to power where I needed I decided to get 20 quad power points installed in the room! That is 80 power points!!! I had to show photos of my current set-up to the builder and the electrician when their eyebrows were raised when I requested this. They were wondering why I need this much power? :anonymous:
      I am getting the power points put in two lines; one over the other. One line is going to be connected to a wired timer. These power points are for the lights. The second line is ordinary points for various other equipment.
       
      The electrician have put another box and 3 circuits in this room alone!
      4th Priority: Lighting and ventilation
      As already mentioned, will be lighting all my tanks relatively well by fishroom standards. I do not see the point of having a fishroom where you can't see the inhabitants of the tanks very well.
      Each row of tanks are to have LED lights fitted above them. I have recently been replacing my T8 fluoro units with these.
       
      I am finding this is saving me a lot of energy.
      As I have been known to leave smelly things in the fishroom; like a bucket of blackworms that have died, it was super important for my fiancee that the room can be easily ventilated! This was something I wanted anyway as the room has no windows and no access to outside aerating the room is not possible.
      We are getting a toilet/bathroom style exhaust fan installed in the room.
       
      Its a type of model that has flaps that close when not in operation providing no gap for heat loss.
      The room is getting two ceiling flouro lights as well, for the times I might walk into the room when the tank lights are off.
      That's about the progress so far. We are still couple of months away from completion.


  • Must Read SKF Articles

  • Join Our Community!

    Register today, ask questions and share your shrimp and fish tank experiences with us!

  • Posts

    • Crabclaw
      Oh no it’s magnetic... could be a problem with my magnet cleaner. Although, depending on the attraction I could just use the mag cleaner for the top 3/4 of the tank and get a scraper or something for the bottom.
    • Crabclaw
      Ooh I just found a sand that looks almost perfect, it even comes in the right package size for my tank. https://www.aquaticsupplies.com.au/products/pisces-iron-sand It’s another Pisces & Oliver Knott creation; AquaIron. Says it doesn’t alter the KH/GH/pH/TDS etc. Only problem is it says it should not be added to established tanks due to... cloudiness?? What do u think about this one?  Thanks again for your guys’ help!
    • jayc
      I was hoping it wasn't the pisces brand. Oh well, cross that off my recommended list. Are you willing to try AquaLava by Oliver Knott? I know it's not cheap.   Maybe. Got a link or something to where you would buy this? Without going into a whole Geology session, it depends on what the composition of the volcanic sand was.  We get a lot of our Scoria from NZ, that is generally inert.      If you want to go with sand, generally, your choice is Bunnings play sand. However, since sand can be sourced from any quarry anywhere in Australia, there is no guarantee it is inert. You can only buy it and then test for changes to the water parameter.
    • Crabclaw
      Hey guys, just found an add for this website showcasing a cool-lookin native algae eating shrimp. https://algaeeatingshrimp.com.au/products/australian-algae-eating-shrimp Anyone heard of these before or own any? My interest was peaked by the claim that they eat hair-type algae, as I have some on my crypts and lace fern that I cannot remove. And for a price of $4 ea, and super easy parameters, they sound pretty doable!  Tell me more oh great SKFians! 😁 (or feel free to point me towards an already existing page) post-note: have you/do you keep these grubs? Seems like your sort of thing.
    • sdlTBfanUK
      Agreed! I had a tank with this setup but it came with the sponge behind the slits. Try not to get too fine sponge as that will restrict the flow and block too quickly. You will need to keep clearing the sponge every now and again as well! Simon
×
×
  • Create New...