Jump to content

Jayc's New 3ft tank


jayc

Recommended Posts

@buck@opqfrt, @Disciple

Well, the update is that I am tearing down the tank for an update and re-scape.

I'm going to go down the Keep It Shrimply Simple (K.I.S.S.) route this time around.

I'm in the process of catching all the shrimp out, and will drain the tank this weekend to give it a good cleaning.

Substrate is going to be replaced with Cal Labs Black Earth premium.

I have also decided to build myself a new modern tank cabinet.

Would be awesome to see the new modern tank cabinet build. I am in a terribly slow process of building a cabinet/rack myself so would be great to exchange notes. :)

Link to comment
Share on other sites

you're on JC.

What plans have you got for a cabinet?

 

Link to comment
Share on other sites

My idea looks more like a LFS style cabinet with a swinging flap to cover the top of the tanks. Not sure if I can say mine looks modern but I can post some work-in-progress photos up if you do not mind as this is your thread.

My wife... ahem... I mean I have a few 'requirements' as this cabinet will be in the lounge room. It has to look aesthetically pleasing and does not throw out too much light that might 'interfere' with watching TV or be too blinding to look at. All hoses have to be concealed and after a lot of 'convincing', the chiller and canister filter can be placed next to the cabinet. Background would be either white or grey, would prefer black but planning to breed discus in it so lighter background would help the fry attach to the parents.

The cabinet I want has to house both tropical (for fish) and chilled tanks (for shrimps) so I am insulating between tanks with 20mm thick foams so dimensions are more than the typical tank dimensions.

Frame wise I use untreated MGP10 90x45mm structural pine and clad it with 9mm MDF. Planning to plump air and water all hidden within the thickness of the frame. A LP20 air pump would sit at the top of the cabinet at 2.2m high.

Currently doing an undercoat and still trying to figure out how to hold the 'flaps' close as I couldn't find the hinges I was after and the flaps are sitting a bit 'opened'. Thinking going velcro or finding a way to mount magnetic clasps but I haven't thought it through enough hence I was hoping to exchange notes.

If you're wondering, my build started in late June, so it has taken some time. Haha.

  • Like 1
Link to comment
Share on other sites

Go ahead, feel free to post pics here.

This is going to be my cabinet design.

cabinet3.thumb.jpg.c480ef0fcac82c2a692be

  • Minimalist look yet ultra functional.
  • Finished in a modern high gloss grey.
  • Those are not doors, instead, they are soft closing drawers.
  • Top drawer will store foodstuff, scaping tools, water treatment stuff, nets, misc tools, etc.
  • Bottom drawer will hold canister, power points, CO2 kit, tubing, in line heaters, etc the bulky equipment. The advantage of the drawer is so I can pull the canister right out from inside the cabinet to work on it. No more broken backs while maintaining the filter. The cabinet will also allow me to find things stored right at the back, without removing half the contents to get to the things stored at the back.
  • Each drawer will have a built in led light that turns on when the drawer is opened.
  • The cabinet top is going to be either white or black, but much thicker than what I have drawn in the picture. At least 30-40mm thick.
  • I've drawn filter inlet/outlet holes on the side, but since this drawing, I've decided to not ruin the looks and will route the filter piping via the back.
  • The back will have an open slit that will allow cables and piping in and out of the cabinet.
  • That back hole won't be entirely open, I'm hoping to find a suitable sized self adhesive brush seal. This will allow the cable and piping to slot through but keep dust out.

 

 

Edited by jayc
  • Like 3
Link to comment
Share on other sites

Very nice. What do you plan to build yours from? MDF? Plywood? Would you be building a frame for it? I have seen some builds using thick MDFs and it was sufficient to hold it all up structurally. I love soft close drawers. Just have to make sure you get appropriate weight/load rated rails for the weight of canister, contents, etc.

Great idea to run the inlet/outlet from the back. I agree the holes on the side kinda 'spoil' the look.

What type of LEDs would you be using? Strip ones? 5050? 3825?

Ahhh... now I see what you mean by cabinet. I guess mine is more like a rack. I won't post my photos then since it'll be no where close to what you are building. I don't want to 'pollute' your thread. Haha.

Edited by jc12
Link to comment
Share on other sites

Very nice. What do you plan to build yours from? MDF? Plywood? Would you be building a frame for it? I have seen some builds using thick MDFs and it was sufficient to hold it all up structurally. I love soft close drawers. Just have to make sure you get appropriate weight/load rated rails for the weight of canister, contents, etc.

Great idea to run the inlet/outlet from the back. I agree the holes on the side kinda 'spoil' the look.

What type of LEDs would you be using? Strip ones? 5050? 3825?

Ahhh... now I see what you mean by cabinet. I guess mine is more like a rack. I won't post my photos then since it'll be no where close to what you are building. I don't want to 'pollute' your thread. Haha.

 

I'm going to build the base frame out of double MDF for all the vertical sections.

Double the thickness of standard MDF, and it should hold the weight.

 

LED lights are going to be 3528. They don't need to be super bright. And I have a spare roll I am planning on using. 

 

 

Edited by jayc
  • Like 1
Link to comment
Share on other sites

My idea looks more like a LFS style cabinet with a swinging flap to cover the top of the tanks. Not sure if I can say mine looks modern but I can post some work-in-progress photos up if you do not mind as this is your thread.

My wife... ahem... I mean I have a few 'requirements' as this cabinet will be in the lounge room. It has to look aesthetically pleasing and does not throw out too much light that might 'interfere' with watching TV or be too blinding to look at. All hoses have to be concealed and after a lot of 'convincing', the chiller and canister filter can be placed next to the cabinet. Background would be either white or grey, would prefer black but planning to breed discus in it so lighter background would help the fry attach to the parents.

The cabinet I want has to house both tropical (for fish) and chilled tanks (for shrimps) so I am insulating between tanks with 20mm thick foams so dimensions are more than the typical tank dimensions.

Frame wise I use untreated MGP10 90x45mm structural pine and clad it with 9mm MDF. Planning to plump air and water all hidden within the thickness of the frame. A LP20 air pump would sit at the top of the cabinet at 2.2m high.

Currently doing an undercoat and still trying to figure out how to hold the 'flaps' close as I couldn't find the hinges I was after and the flaps are sitting a bit 'opened'. Thinking going velcro or finding a way to mount magnetic clasps but I haven't thought it through enough hence I was hoping to exchange notes.

If you're wondering, my build started in late June, so it has taken some time. Haha.

Hello JC,

I know a bit further down you mention not wanting to put picture in this thread but I would be very interested in seeing your design. Do you mind creating a journal or a post to show your design.

The reason being is "your" requirements for a rack are very similar to the list of requirements "I" have before I can build a rack. I just started thinking about a few ways to build a rack with the above requirements lol. I figure if I design it first with a good plan I will have a better chance for approval.

 

Link to comment
Share on other sites

Hello JC,

I know a bit further down you mention not wanting to put picture in this thread but I would be very interested in seeing your design. Do you mind creating a journal or a post to show your design.

The reason being is "your" requirements for a rack are very similar to the list of requirements "I" have before I can build a rack. I just started thinking about a few ways to build a rack with the above requirements lol. I figure if I design it first with a good plan I will have a better chance for approval.

 

Sorry jayc for hogging your thread. Ok. I'll try post something up but it is still work in progress so it is rudimentary.

  • Like 1
Link to comment
Share on other sites

Dont need to apologise. I'm one of the biggest thread jackers on SKF myself.

Link to comment
Share on other sites

sounds like a neat little set up dude! i cant wait to stalk to pics:gangs:

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Join Our Community!

    Register today, ask questions and share your shrimp and fish tank experiences with us!

  • Must Read SKF Articles

  • Posts

    • beanbag
      Update to say that after a few gravel vacs, front wall scrub, moss / floating plant trim, that the condition seems to have improved.  My current theory is that it is due to waste / debris management, where "stuff" like that brown mulm accumulates in the substrate and behind the HMF filters.  Maybe some tanks can somehow deal with it, but mine can't.  Also another experienced shrimper suggested that maybe those "shell bugs" don't just live on the shrimps but also in this debris.  Maybe this is the reason some tanks fail due to "old tank syndrome" where all they need is a good gravel vac? Also, I am guessing that plant trim helps too because now more of the nutrients and light go into growing algae instead of more plants? Well anyway for this tank I will try weekly water change and monthly gravel vac / plant trim.  For my next tank, I'm thinking of something like an under-gravel system where this mulm can fall down and I vac it out.
    • sdlTBfanUK
      Good to have an update and good to hear you are getting shrimplets, so hopefully your colony will continue and you may not get to the point where you have to cull some to stop over population. These type of shrimp only live 12 - 18 months so the adult deaths may be natural? If you have the time I would do weekly 25% water changes, adding the new water via a drip system and do some vacuuming clean of the substrate each week, even if only a different bit each week! See if that helps in a few months and if it does then stick with that regime? It should help reduce any build-ups that may be occuring!
    • beanbag
      Hello again, much belated update: The tank still has "cycles" of 1-2 month "good streaks" where everybody seems to be doing well, and then a bad streak where the short antenna problem shows up again, and a shrimp dies once every few days.  I am not sure what causes things to go bad, but usually over the course of a few days I will start to see more shrimp quietly standing on the HMF filter, and so I know something is wrong.  Since I am not "doing anything" besides the regular 1-2 week water changes, I just assume that something bad is building up.  Here's a list of things that I've tried that are supposed to be "can't hurt" but didn't prevent the problem either: Dose every other day with Shrimp Fit (very small dose, and the shrimp seem to like it) Sotching Oxydator Seachem Purigen to keep the nitrates lower Keeping the pH below 5.5 with peat Things that I don't do often, so could possibly "reset" the tank back to a good streak, are gravel vac and plant trim, so maybe time to try those again. One other problem I used to have was that sometimes a shrimp would suddenly stop eating with a full or partially full digestive tract that doesn't clear out, and then the shrimp will die within a few days.  I suspected it was one of the foods in my rotation - Shrimp Nature Infection, which contains a bunch of herbal plant things.  I've had this in my food rotation for a few years now and generally didn't seem to cause problems, but I removed it from the rotation anyway.  I don't have a lot of adult Golden Bees at this point so I can't really tell if it worked or not. Overall the tank is not too bad - during the good streaks occasionally a shrimp will get berried and hatch babies with a 33-50% survival rate.  So while there are fewer adults now, there are also a bunch of babies roaming around.  I guess this tank will stagger on, but I really do need to take the time to start up a new tank.  (or figure out the problem)
    • jayc
      If that is the offspring, then the parents are unlikely to be PRL. I tend to agree with you. There are very few PRLs in Australia. And any that claim to be needs to show proof. PRL genes have to start as PRL. CRS that breed true after x generations doesn't turn it into a PRL. Neither can a Taiwan bee shrimp turn into a PRL despite how ever many generations. I've never seen a PRL with that sort of red colour. I have on Red Wines and Red Shadows - Taiwan bee shrimps. So somewhere down the line one of your shrimp might have been mixed with Taiwan bees and is no longer PRL. It just tanks one shrimp to mess up the genes of a whole colony. 
    • sdlTBfanUK
      Sorry, missed this one somehow! The PRL look fantastic and the odd ones look part PRL and part Red wine/Red shadow in the colour. They are still very beautiful but ideally should be seperated to help keep the PRL clean if you can do that.  Nice clear photos!
×
×
  • Create New...