Jump to content

New Library Article - DIY Shrimp Tank Fans


CNgo2006

Recommended Posts

The Summer months can be particularly harsh and fatal for your shrimps. The temperatures reaching up to the 40 degrees mark depending on where you reside can spell impending doom for your shrimp. During these hot days you can see shrimp keepers around the world posting threads such as "Help shrimp dying!" and "why are my shrimp not active and pale"? The higher temperatures are an invitation for nasty bacteria and diseases, another factor is the shortage of oxygen in the water on those hot summer days.

This article will show how to make a simple, cheap but effective way to help with the hot temperatures during summer, of course this is in no way meant to take the place of a chiller as chillers are always the best way to maintain a stable temperature during summer but this DIY fan should be used only as a means to lower the temperature 2-4 degrees ambient temperature, especially for those of us who reside in areas where the temperature does not get that extreme and can not afford a chiller as yet. Also an excellent cooling solution for Nano tanks! However for larger tanks I can not stress enough that when you can afford a chiller please do get one.

So lets get started, firstly I will explain what parts are needed.

1. Wire Nuts x 2

Posted Image

2. Laptop Portable Fans x2

Posted Image

3. 240v to DC 5v 2A switching power supply

Posted Image

4. Wire Snips

Posted Image

Now that we have the parts let's get to the DIY part

1. Snip off the USB parts from both of the fans, snip the jack off the power supply and expose wires with the wires snips

Posted Image

Posted Image

2. The fans will have 2 red wires and 2 black wires each (1 red and black wire for the blue LED's and the other for the fan motor), just join all red to red wires and black to black wires as they will all need to be joined to the power supply.

Posted Image

3. Now join the exposed positive wire on the power supply to the red wires on the fans and negative wires on the power supply to the black wires of the fans.

(You can tell which is positive and negative by reading the back of power supply).

Posted Image

Posted Image

4. Screw wire nuts onto the exposed joined wires

Posted Image

We are done! Now to test! (Note if it does not work then unscrew the wire taps and reverse the positive and negative wires)

http://shrimpkeepers...39909848517.jpg

http://shrimpkeepers...39909848521.jpg

On my tests the original temperature of the water was 26 deg on my 40l tank, after approximately 40 minutes it had gone down to 23 deg and was at 22 deg after an hour 15 minutes.

All parts purchased in this DIY was from eBay

Portable Fans - $3 each, $6 for two.

Power Supply - $3.10

Wire Nuts (50 pcs) - $1.50

Wire Snips - Free (had them already)

Making a grand total of $10.60 for an excellent cooling solution!

This is a very easy and cheap DIY, the result is a fan that will lower the temperature of the water by 2-4 degrees.

Click here to view the article

  • Like 1
Link to comment
Share on other sites

  • 5 months later...

looks easy enough, ive been thinking about geting some fleabay computer fans to do this. thanks for the wright up! :)

Link to comment
Share on other sites

yea thats true, keep lids on, risk over heating shrimp and fish

 

i might have to invest in one still

 

@CNgo2006 with your powersupply why didnt you just use a usb wall charger? this way you dont need to cut wires :P

Edited by perplex
  • Like 1
Link to comment
Share on other sites

@CNgo2006 with your powersupply why didnt you just use a usb wall charger? this way you dont need to cut wires :P

 

I can just see Chi having a facepalm moment when you told him that.

Link to comment
Share on other sites

I can just see Chi having a facepalm moment when you told him that.

haha yea, and i think everyone has them laying around from there phones too ahah

Link to comment
Share on other sites

@CNgo2006 with your powersupply why didnt you just use a usb wall charger? this way you dont need to cut wires :P

I did use usb charger at first but they shorted out after continuos use, with the power supply i can use continuosly for whole day no problems. Also gives me peace of mind...if usb shorts/blows no fans = no shrimp.

Link to comment
Share on other sites

I did use usb charger at first but they shorted out after continuos use, with the power supply i can use continuosly for whole day no problems. Also gives me peace of mind...if usb shorts/blows no fans = no shrimp.

you must of been pulling to much power from it, im sure if you get a 2amp usb charger you will be fine :P

Link to comment
Share on other sites

you must of been pulling to much power from it, im sure if you get a 2amp usb charger you will be fine :P

 

You are correct but the power supply only cost me $3...plus i wanted to join more fans together, the power supply is more then capable of running 2-3

Link to comment
Share on other sites

You are correct but the power supply only cost me $3...plus i wanted to join more fans together, the power supply is more then capable of running 2-3

yea yea, all good! :D

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Join Our Community!

    Register today, ask questions and share your shrimp and fish tank experiences with us!

  • Must Read SKF Articles

  • Posts

    • beanbag
      Update to say that after a few gravel vacs, front wall scrub, moss / floating plant trim, that the condition seems to have improved.  My current theory is that it is due to waste / debris management, where "stuff" like that brown mulm accumulates in the substrate and behind the HMF filters.  Maybe some tanks can somehow deal with it, but mine can't.  Also another experienced shrimper suggested that maybe those "shell bugs" don't just live on the shrimps but also in this debris.  Maybe this is the reason some tanks fail due to "old tank syndrome" where all they need is a good gravel vac? Also, I am guessing that plant trim helps too because now more of the nutrients and light go into growing algae instead of more plants? Well anyway for this tank I will try weekly water change and monthly gravel vac / plant trim.  For my next tank, I'm thinking of something like an under-gravel system where this mulm can fall down and I vac it out.
    • sdlTBfanUK
      Good to have an update and good to hear you are getting shrimplets, so hopefully your colony will continue and you may not get to the point where you have to cull some to stop over population. These type of shrimp only live 12 - 18 months so the adult deaths may be natural? If you have the time I would do weekly 25% water changes, adding the new water via a drip system and do some vacuuming clean of the substrate each week, even if only a different bit each week! See if that helps in a few months and if it does then stick with that regime? It should help reduce any build-ups that may be occuring!
    • beanbag
      Hello again, much belated update: The tank still has "cycles" of 1-2 month "good streaks" where everybody seems to be doing well, and then a bad streak where the short antenna problem shows up again, and a shrimp dies once every few days.  I am not sure what causes things to go bad, but usually over the course of a few days I will start to see more shrimp quietly standing on the HMF filter, and so I know something is wrong.  Since I am not "doing anything" besides the regular 1-2 week water changes, I just assume that something bad is building up.  Here's a list of things that I've tried that are supposed to be "can't hurt" but didn't prevent the problem either: Dose every other day with Shrimp Fit (very small dose, and the shrimp seem to like it) Sotching Oxydator Seachem Purigen to keep the nitrates lower Keeping the pH below 5.5 with peat Things that I don't do often, so could possibly "reset" the tank back to a good streak, are gravel vac and plant trim, so maybe time to try those again. One other problem I used to have was that sometimes a shrimp would suddenly stop eating with a full or partially full digestive tract that doesn't clear out, and then the shrimp will die within a few days.  I suspected it was one of the foods in my rotation - Shrimp Nature Infection, which contains a bunch of herbal plant things.  I've had this in my food rotation for a few years now and generally didn't seem to cause problems, but I removed it from the rotation anyway.  I don't have a lot of adult Golden Bees at this point so I can't really tell if it worked or not. Overall the tank is not too bad - during the good streaks occasionally a shrimp will get berried and hatch babies with a 33-50% survival rate.  So while there are fewer adults now, there are also a bunch of babies roaming around.  I guess this tank will stagger on, but I really do need to take the time to start up a new tank.  (or figure out the problem)
    • jayc
      If that is the offspring, then the parents are unlikely to be PRL. I tend to agree with you. There are very few PRLs in Australia. And any that claim to be needs to show proof. PRL genes have to start as PRL. CRS that breed true after x generations doesn't turn it into a PRL. Neither can a Taiwan bee shrimp turn into a PRL despite how ever many generations. I've never seen a PRL with that sort of red colour. I have on Red Wines and Red Shadows - Taiwan bee shrimps. So somewhere down the line one of your shrimp might have been mixed with Taiwan bees and is no longer PRL. It just tanks one shrimp to mess up the genes of a whole colony. 
    • sdlTBfanUK
      Sorry, missed this one somehow! The PRL look fantastic and the odd ones look part PRL and part Red wine/Red shadow in the colour. They are still very beautiful but ideally should be seperated to help keep the PRL clean if you can do that.  Nice clear photos!
×
×
  • Create New...