Jump to content

Tank divided with flyscreen need advice

BiGGiE

By BiGGiE
in Equipment & DIY

 Share

Recommended Posts

JohnH Shrimp Breeder

JohnH

Posted
Posted

I ordered some SS mesh from a UK company who have their own website plus are on fleabay. They sell it in A4 and A3 sizes and different gauges. The line I got was #40 Stainless Steel Woven which is very fine and will keep the smallest of shrimpletes in place.

Link to comment
Share on other sites
blindfisherman Shrimp Breeder

blindfisherman

Posted
Posted
I ordered some SS mesh from a UK company who have their own website plus are on fleabay. They sell it in A4 and A3 sizes and different gauges. The line I got was #40 Stainless Steel Woven which is very fine and will keep the smallest of shrimpletes in place.

I have been using that exact mesh and am finding shrimp getting through.

Hence trying out #80 now.

Link to comment
Share on other sites
CNgo2006 Shrimp Master

CNgo2006

Posted
Posted
I have been using that exact mesh and am finding shrimp getting through.

Hence trying out #80 now.

Sam I dunno what number 40 you are using as we discussed when you were over but I use number #30 as filter guards with no issues so number 40 should be fool proof...

Link to comment
Share on other sites
blindfisherman Shrimp Breeder

blindfisherman

Posted
Posted

The #40 from the uk mesh company.

Doubt they would be climbing as its a few cm up the glass and over.

Maybe some are getting into yours but not surviving.?

Link to comment
Share on other sites
JohnH Shrimp Breeder

JohnH

Posted
Posted

Are you sure it is #40 you have? The stuff I have is very fine and shrimp would have to be microscopic to get through it. I have it covering the outlets in my rack system.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Join Our Community!

    Register today, ask questions and share your shrimp and fish tank experiences with us!

  • Must Read SKF Articles

    Shrimp Disease and Treatment
    Tibee, Taitbee, Pinto, Mischling, F1, F2

  • Tropical Fish Forum
    Discus Breeding Guide
    Discus Disease and Treatment Guide

  • Posts

    • sdlTBfanUK
      Finally set up the 30L Shrimp Tank

      By sdlTBfanUK · Posted

      It has been a few weeks now and I have done a couple of large water changes. I tested the water parameters this morning, GH6 and KH2, TDS 140 and PH 7.5. Obviously the PH is off but there isn't anything in the tank that should cause the PH to rise to this figure so I will just run the tank for another month with 10% weekly water changes (probably just with RO water) and see where we are at that point. The RO water tests at PH6, and the KH and GH in the tank could come down as they are at the upper limits for Caridina shrimps! There are only about 10 very small snails in there at this point, but they seem to be doing well enough.
    • sdlTBfanUK
      Pure Red Line (PRL) Shrimps Western Australia seller

      By sdlTBfanUK · Posted

      I believe these to be very rare in Australia so you may even consider making it a longer term plan and produce your own by starting with the best CRS you can get as that is where the pure lines started! Depends how patient and interested in the project you are, but would save money as well? If I recall correctly it takes from 8 generations of selective breeding? They sell them at micro aquatic shop but do not ship to Western Australia, but that means they are available in Australia. https://microaquaticshop.com.au/products/pure-red-line-grade-ss-shrimp Good luck and just maybe smeone on here may point you in the right direction or be able to supply you with some.
    • Jimmy
      Pure Red Line (PRL) Shrimps Western Australia seller

      By Jimmy · Posted

      Hi Guys,  Does anyone know where to buy PRL shrimps in WA, not the CRS please. Thanks Regards  
    • Subtlefly
      Is this garden hose end alloy pipe safe to use for aquarium piping?

      By Subtlefly · Posted

      Yes it’s super accurate to position where I want now and stay there- I am satisfied.  All the fish and shrimpers are doing excellent! Coming up on 4 years running!
    • sdlTBfanUK
      Is this garden hose end alloy pipe safe to use for aquarium piping?

      By sdlTBfanUK · Posted

      You must be pleased with that, it looks better and is much more robust and less likely to damage or leaks! The tank looks very natural now it has been running for a time. I see the ember tetras, how are the blue shrimp doing, I see a few? The cat and dog look very content and unimpressed, lol.
×
×
  • Create New...