Jump to content
  • Must Read SKF Articles

  • Join Our Community!

    Register today, ask questions and share your shrimp and fish tank experiences with us!

  • Posts

    • Crabby
      Do you have plants in the tank? And sorry for asking multiple times, but can you send a photo of the tank through so we can see the setup? 
    • jayc
      Yes, just right.   That's good news. It looks like there is some bacteria in the tank and it's processing the ammonia. Nitrates are building up however, but that can be reduced with water changes. Continue using the Fluval Cycle at every water change, ie. weekly. Just keep working on reducing the pH slowly.    
    • sdlTBfanUK
      That temperature is perfect! The wood and any Indian Almond leaves will be a slow (and that is what you want) PH reduction. It looks to be going well, the main thing is to change things very slowly if everything is otherwise ok! If the shrimp are active and investigating that is a good sign! Simon
    • Brando
      Update: My water temperature was read wrong.... it was not 82 haha but instead it is 72.. (which is better right) My PH is still 7.6 after adding some mopani driftwood that i boiled for 3 hours and soaked for 1 hour. MY ammonia appears to be closer to 0ppm,if not between 0 and .25pm. (definitely not .25 anymore) My nitrites are still at 0. My nitrates have risen to what I think might be 30-40ppm from 20ppm. The shrimp seem to acting normal! eating and loving the driftwood! I added the fluval cycle yesterday as well. Thank you all for the help so far and I am open to hearing more advice 🙂  
    • beanbag
      wait wait Do NOT add driftwood unless you know it is a kind that is shrimp safe and also free of pesticides and chemicals Second, boil the driftwood at least 1/2 hours in distilled water so that it doesn't suddenly release a whole bunch of things in the water. Third, do not attempt to use this to push around the pH value, especially if you don't know what is the KH value is.  You don't want sudden pH changes.  Use something a bit more gentle like Indian Almond leaf, which you can immediately take out if you overdo it. Fourth get the API liquid test kits for Ammonia, Nitrite, and Nitrate and test every day. Fifth, get something like Seachem Prime that can protect against ammonia.  If you ever see ammonia or nitrite, then dose this approx 1 drip per gallon per day.  If you don't see any, then still dose something like 1 drip per 2 gallons per day anyway, until you are sure that the cycle is established.  You can look up the instructions and dosing guidelines for Seachem's fish-in-tank cycle guide.  (Except here you will be using Fluval cycle instead of Seachem Stability)
  • Create New...