Jump to content

Need More Room - It's Rack Time!


JohnH

Recommended Posts

The tanks take up all the shelf footprint so I can't add vertical supports. Hopefully what I've done will be plenty enough.

Link to comment
Share on other sites

  • Replies 138
  • Created
  • Last Reply

Top Posters In This Topic

  • JohnH

    54

  • Squiggle

    25

  • ineke

    15

  • BlueBolts

    9

Ok, shelves are all reinforced. Clark Rubber was open today so I was able to get some 25mm foam as well.

So if there is some sag, the tanks should be safe.

P4010411_zpsb8b5478c.jpg

Link to comment
Share on other sites

Looks much more sturdy now. Youve also lost a lot of top space to put your hands in so make sure whatever you use to cover up the sides is removable (clips on off, slides on off etc)

Link to comment
Share on other sites

What size is that stand? I'm looking for a similar one myself at present.

Link to comment
Share on other sites

Looks much more sturdy now. Youve also lost a lot of top space to put your hands in so make sure whatever you use to cover up the sides is removable (clips on off' date=' slides on off etc)[/quote']

Yeah, I'm thinking a hinged flap along the top of the tanks

Link to comment
Share on other sites

Those shelves look awesome now, the extra beams are a bit of overkill cause the front & back beams from the rack support it laterally but it's done & the shelves will never move, also it will be a good support for your lights. With your side plates, get some double sided sticky Velcro so they will be easy to remove if needed :encouragement:

image-74_zpsfcb32766.jpg

Link to comment
Share on other sites

Looking great :), its good to see someone thinking about things and not rushing everything :), cant wait to see the finished product.

Link to comment
Share on other sites

My stainless steel strainers that will cover the drain on each tank arrived today. The mesh isn't as fine as I thought it would be. I'm thinking that some shrimplets may get through. Although as the drain is at the top of the tank, perhaps there will be less chance?

P4030412_zps33b85f43.jpg

Link to comment
Share on other sites

You'll have to let me know how they go, I need one of these and was going to order one in the next few days.

I can't speak for JohnH but they sell them at most irrigation stores :)

Link to comment
Share on other sites

Hi John,

This is looking really good. How about you make me 50 of those shelves :p I was thinking about doing something similar to add extra support.

Serkan

Link to comment
Share on other sites

After seeing your fish room Serkan, I thought you would be the Jedi Master of these Racks lol

Link to comment
Share on other sites

+1 Agree, Serkan your fish room is epic, you have to post a thread about it & update those who have seen it on the new houses progress :encouragement:

epic-fail-halloween-juxtaposition-fail_zpsff58e9e0.jpg

Link to comment
Share on other sites

A question on air vents for my drain pipes.

22bd82bd-2859-43d6-85a9-9184671f2aa6_zps38d2864e.jpg

The red line is where I am planing to run the drain pipes from the bulkhead outlets. Above each bulkhead outlet is an air vent (green dots). Do I need to run an additional air vent (yellow line) to allow the best flow or will the ones I already have be enough?

Link to comment
Share on other sites

Personally I would cause it won't really cost much extra or be hard to fit but I've been told I'm over cautious :encouragement:

2cf53__1-20-13-hilarious-funny-photos-fail1cat_zpsf2040a90.jpg

Link to comment
Share on other sites

Why not...won't hurt, and if you're using 20/25mm PVC pipe, you can easily just cap it off anyway....but theoritically, I don't think it's necessary.....

Link to comment
Share on other sites

I spent the afternoon doing the plumbing and this where I am at.

P4060456_zps9ac2b0ca.jpg

I ended up grabbing a 4800L/h pump while I got all the irrigation fittings

P4060457_zps8d9f3a0a.jpg

The pump diverts back to the input side of the sump where the K1 media will go. So the drain pipe plus the diverted pump hose should keep the K1 swirling around. I think Dean or Bluebolts mentioned this method in another thread - it's a good idea.

P4060458_zpsc3f14524.jpgP4060459_zps51267469.jpg

I have my spray bars about half way down the tank and pointing up. I did it this way as that's how it worked out with the fitting I have. Any comments on having them like this?

P4060462_zps35551e57.jpg

I also added a tap and hose fitting to the drain so I can feed fresh water into the sump and collect water from the drain when doing water changes.

P4060463_zps5f291743.jpg

Next step is to fill it all up with water and test it all out.

Link to comment
Share on other sites

Wow dude, your setup is looking awesome. I like the water change tap, very cool addition & I like the way you've put the spray bar, it will create great surface agitation. I could see in your pics but have you got a tap on the inlet of each tank so you can adjust the flow so each tank is even? :encouragement:

Link to comment
Share on other sites

  • HOF Member

I am in awe of you!!!! I would love to have that done for my tank setup but I was lost after you made the rack LOL. Looks great can't comment on the technical stuff but well done you.

Cheers

Ineke:encouragement:

Link to comment
Share on other sites

lookin good, i am dreading when it comes to doing plumbing on my rack when i get to build it

Link to comment
Share on other sites

There are seven taps on the pump side of the plumbing.

Tap 1 - Diverter to Sump K1

Tap 2 - Level one hose

Tap 3 - Tank 1 spray bar

Tap 4 - Tank 2 spray bar

Tap 5 - Level two hose

Tap 6 - Tank 3 spray bar

Tap 7 - Tank 4 spray bar

Filling it via the garden hose now for a test out. Fingers crossed.

Link to comment
Share on other sites

Just an idea, you can fill the little section to the left of the bio balls with matrix, more surface are for bio filtration, IMO you can never have too much bio filtration. Also I'd put a couple of Purigen bags on top of the matrix for that extra polishing & also to suck up any rogue organic compounds :encouragement:

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Join Our Community!

    Register today, ask questions and share your shrimp and fish tank experiences with us!

  • Must Read SKF Articles

  • Posts

    • beanbag
      Update to say that after a few gravel vacs, front wall scrub, moss / floating plant trim, that the condition seems to have improved.  My current theory is that it is due to waste / debris management, where "stuff" like that brown mulm accumulates in the substrate and behind the HMF filters.  Maybe some tanks can somehow deal with it, but mine can't.  Also another experienced shrimper suggested that maybe those "shell bugs" don't just live on the shrimps but also in this debris.  Maybe this is the reason some tanks fail due to "old tank syndrome" where all they need is a good gravel vac? Also, I am guessing that plant trim helps too because now more of the nutrients and light go into growing algae instead of more plants? Well anyway for this tank I will try weekly water change and monthly gravel vac / plant trim.  For my next tank, I'm thinking of something like an under-gravel system where this mulm can fall down and I vac it out.
    • sdlTBfanUK
      Good to have an update and good to hear you are getting shrimplets, so hopefully your colony will continue and you may not get to the point where you have to cull some to stop over population. These type of shrimp only live 12 - 18 months so the adult deaths may be natural? If you have the time I would do weekly 25% water changes, adding the new water via a drip system and do some vacuuming clean of the substrate each week, even if only a different bit each week! See if that helps in a few months and if it does then stick with that regime? It should help reduce any build-ups that may be occuring!
    • beanbag
      Hello again, much belated update: The tank still has "cycles" of 1-2 month "good streaks" where everybody seems to be doing well, and then a bad streak where the short antenna problem shows up again, and a shrimp dies once every few days.  I am not sure what causes things to go bad, but usually over the course of a few days I will start to see more shrimp quietly standing on the HMF filter, and so I know something is wrong.  Since I am not "doing anything" besides the regular 1-2 week water changes, I just assume that something bad is building up.  Here's a list of things that I've tried that are supposed to be "can't hurt" but didn't prevent the problem either: Dose every other day with Shrimp Fit (very small dose, and the shrimp seem to like it) Sotching Oxydator Seachem Purigen to keep the nitrates lower Keeping the pH below 5.5 with peat Things that I don't do often, so could possibly "reset" the tank back to a good streak, are gravel vac and plant trim, so maybe time to try those again. One other problem I used to have was that sometimes a shrimp would suddenly stop eating with a full or partially full digestive tract that doesn't clear out, and then the shrimp will die within a few days.  I suspected it was one of the foods in my rotation - Shrimp Nature Infection, which contains a bunch of herbal plant things.  I've had this in my food rotation for a few years now and generally didn't seem to cause problems, but I removed it from the rotation anyway.  I don't have a lot of adult Golden Bees at this point so I can't really tell if it worked or not. Overall the tank is not too bad - during the good streaks occasionally a shrimp will get berried and hatch babies with a 33-50% survival rate.  So while there are fewer adults now, there are also a bunch of babies roaming around.  I guess this tank will stagger on, but I really do need to take the time to start up a new tank.  (or figure out the problem)
    • jayc
      If that is the offspring, then the parents are unlikely to be PRL. I tend to agree with you. There are very few PRLs in Australia. And any that claim to be needs to show proof. PRL genes have to start as PRL. CRS that breed true after x generations doesn't turn it into a PRL. Neither can a Taiwan bee shrimp turn into a PRL despite how ever many generations. I've never seen a PRL with that sort of red colour. I have on Red Wines and Red Shadows - Taiwan bee shrimps. So somewhere down the line one of your shrimp might have been mixed with Taiwan bees and is no longer PRL. It just tanks one shrimp to mess up the genes of a whole colony. 
    • sdlTBfanUK
      Sorry, missed this one somehow! The PRL look fantastic and the odd ones look part PRL and part Red wine/Red shadow in the colour. They are still very beautiful but ideally should be seperated to help keep the PRL clean if you can do that.  Nice clear photos!
×
×
  • Create New...