Jump to content
Sign in to follow this  
Dead Can Dance

Cycling WP's

Recommended Posts

Squiggle

WP looks good for the cycle, when the ammonia hits zero do a water change(with RO & minerals) to get your nitrates down, you want them to be below 5ppm, but I would definitely wait till your pen turns up so you don't overdose the minerals cause then you'll be back to square one & have to change it again to get your TDS down :encouragement: Stability is working otherwise you wouldn't be getting nitrates :congratulatory:

Share this post


Link to post
Share on other sites
hoang1912

Dean said that we have to use EC prn for testing RO + Salt water mineral.

I dont know why my tank is running for a week and ammonia still around 0.25-1 and no nitri, nitrate. Still not cycled yet?

Share this post


Link to post
Share on other sites
mr_c265

Can't comment on the first bit, but yes, if there is ammonia, no nitrite and no nitrate, it's still in the very first step of cycling. It will be a while.

Share this post


Link to post
Share on other sites
JohnH

Are you using tap water? If you do check to see if you get an ammonia reading straight from the tap. Your tap water may have chloramine in it which will give you a false reading for ammonia.

Share this post


Link to post
Share on other sites
Squiggle

Very good point John :encouragement:

Share this post


Link to post
Share on other sites
Dead Can Dance

I'll laugh quite hard if its that.... I've been waiting a while now and ammonia has been at 0.25 for a long time and I used water straight from the tap thinking it'll age in there, no biggie.

Testing tap water now.

Share this post


Link to post
Share on other sites
Dead Can Dance

Forgot to mention, the tank has a fair bit of algae in it. getting concerned the shrimp will have trouble eating it all. :)

Result does show a small amount of ammonia. I added prime to tank. Should that help ?

Let's pretend it has cycled awhile ago, would my nitrates keep rising with nothing in there ?

Share this post


Link to post
Share on other sites
hoang1912

I got a question.

Currently, my tank is cycling with tap water + seachem stability.

I want to change to RO water + Bee shrimp mineral, Dean said that it's better when I take all the tap water out and replace 100% it with RO water.

The question is am I have to keep cycling with Seachem stability? and the cycling process is back to the start or it keep going?

Share this post


Link to post
Share on other sites
ninja

Hoang1912, exactly when did you start up this tank, please?

Share this post


Link to post
Share on other sites
hoang1912

Last Thusday :)

Share this post


Link to post
Share on other sites
ninja

Good ok, when were you planning to put shrimp in?

Share this post


Link to post
Share on other sites
hoang1912

As soon as it has been cycled.

But I am thinking changing from tap water to RO+ shrimp mineral to the cycling tank.

Could I just take all tap water out and replace it with RO? and does it effect to the cycling process?

Share this post


Link to post
Share on other sites
ninja

Yes it will, best to leave alone for now. Do you have another tank?

Share this post


Link to post
Share on other sites
hoang1912

yeah. I got 2 tanks.One is currently using and the other is cycling. Thinking to change to RO water because my old tank TDS having problem with TDS and they are dying due to unable molting :(. I am changing 10-20% water everyday and it's come down to 250 from 500

Share this post


Link to post
Share on other sites
Dead Can Dance

Can anyone tell me why shrimp go toward the water that is just freshly put into the tank ? Ie, they literally touch the surface of the water as the RO water is hitting the tank ?

Share this post


Link to post
Share on other sites
Dead Can Dance

I tested my RO water / tap water, it's showing the same ammonia reading as my tank - not yellow yellow but between the yellow and first green (0.25)

So I'm using that as my reference and my ammonia has been 0 for awhile.

I did a WC and my nitrates were ~20ppm now down to 5ppm.

Ill test again tomorrow and see how it's all going. If all is well, I can move my chocolates in.

Share this post


Link to post
Share on other sites
Kaya

Hi all

so I'm cycling my first shrimp tank and I'm not sure if it's ready yet. I filled half the tank with water from an existing shrimp tank and half tap water conditioned with seachem prime as well as a mixture of gravel from an existing tank and new gravel. I set it up on Tuesday which seems really fast to cycle but the water parameters are:

ammonia 0ppm

nitrite 0ppm

nitrate 5ppm

pH 7.8

temp 24C

Is it ready for cherries or should I wait longer? I read that nitrate is the final product of conversion from ammonia->nitrite->nitrate so to me it looks cycled but I don't want to kill my shrimp :confused-new:

thanks for any help :)

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  



  • Join Our Community!

    Register today, ask questions and share your shrimp and fish tank experiences with us!

  • Posts

    • Chiquarius
      Greetings shrimpkeepers, I have a 10 gallon tank in my basement. It gets very cool down there, especially in the winter. Right now the tank is unheated. I have some neos in there that seem to be doing alright. I would like to heat the tank but not have to constantly adjust for temperature fluctuations.    Can anyone recommend any automatic/adjustable aquarium heaters that will adjust as needed to a preset temperature? If so, please let me know.
    • 3718
      I found one of my fire red shrimplets swimming erratically with his back arched up and i siphoned him out. Found some sort of white or clear hair or something growing out from the front of the shrimp. He is still able to wiggle his legs and antennas but just seem to have no balance too. Any ideas?   Sent from my ASUS_Z01KDA using Shrimp Keepers Forum mobile app     This is the clearest pic i could find. Its too tiny for my camera to get a clear shot Sent from my ASUS_Z01KDA using Shrimp Keepers Forum mobile app
    • jayc
      Are you using a plant substrate like ADA Amazonia? If you are not, than ammonia won't get high enough to stall a cycle.   Just don't use too much Prime. Only enough to treat the amount of tap water being added. That should minimise any impact that it might have to bind ammonia.
    • Razzy
      I'm considering water changing because I read that too high of an ammonia reading will also stall the cycle. I only have prime but I was reading conflicting results on if it stalls the cycle by not letting the bb feed. 🤔    
    • Cesar
      Yep, I see it too... Will look into this... Recently upgraded to the latest forum software... Always bugs to fix afterward... Thanks @Grubs for bringing this to my attention.
×
×
  • Create New...