Jump to content
Dean

Hydra & Planaria shrimp safe removal.

Recommended Posts

Matmatmat

Worked for me too, not a single shrimp death and I'm pretty sure I overdosed... My biggest problem using powders is how to measure weight and dose correctly? I guess it's only drug dealers and pro shrimp keepers that have tiny scales ;)

Share this post


Link to post
Share on other sites
sajica

Luckily enough, the powder is pretty safe if you over dose with it. Really the best way is to weigh it out on small scales, but I never have money available to impulse buy them when I see them, but I'm sure you can buy them on ebay.

Generally a level teaspoon is 5grams (and also 5ml). If you tip that powder and pretend to be a cocaine addict and cut the powder into roughly 5 equal portions, then you'll have approximately 1 gram.

I'd almost consider decent accurate scales a necessity, but you won't use them often, but when you need it, they're amazingly handy.

I'm glad to hear the positive feedback guys

*Disclaminer I would never dose with any form of medication if your water quality isn't perfect.*

Share this post


Link to post
Share on other sites
sajica

Hi Dean/ Mods

Any chance to sticky this before it becomes lost in the bowels of SKF?

Share this post


Link to post
Share on other sites
torface

So i just noticed some hydra in my big tank. I've had a few planaria in my other tanks on/off but i've been manually removing them as i see them. Hydra gross me out, so i'm going to head over to Aquotix and buy some of this.

Is there a risk of an ammonia spike when they all die off?? Should I water change after? How much and when? Does Purigen affect the effectiveness of this product at all?

Share this post


Link to post
Share on other sites
JohnH
Should I water change after? How much and when? Does Purigen affect the effectiveness of this product at all?

I'd like to know this as well. I have some coming in the mail for my divided tank.

Share this post


Link to post
Share on other sites
jrc693
I'd like to know this as well. I have some coming in the mail for my divided tank.

Torface and John it says 40% before dosage I think, ill check when i get home, but as I was too busy during the hydra outbreak I only did a 10% and then dosed as recommended. I never checked parameters throughout but everything went well, no plants melted, no shrimp died and no sign of hydra since.

Share this post


Link to post
Share on other sites
Smithers

I found 2 of these critters last night and scooped them out pronto.....looked online and found them to be Hydracarina - Water Mite,

Would the product on the thread do the job in gettin grid of them?

Do they come from plants into your tank?

post-1452-139909851203_thumb.jpgpost-1452-139909851207_thumb.jpg

post-1108-139909850042_thumb.jpg

post-1108-139909850046_thumb.jpg

Share this post


Link to post
Share on other sites
Foxpuppet

wow such a gutsy play from you guys, that's epic risk vs reward right there!

after some of the previous comments i have this image of shrimp with rolled up bank notes ;)

a>

Share this post


Link to post
Share on other sites
OzShrimp

Can someone just confirm for me if i did my treatment right, i got 5 ml of the powder (what a pain lol) i didnt know how much was in the spoon so put it in a neurofen syringe then mixed it with rain water and put it in the tank, now my understanding is the doseage should last 3 days or do i repeat for 3 days?

Share this post


Link to post
Share on other sites
Dean

I'm pretty sure that 1 spoon is 5ml. And you dose again after 3 days

Share this post


Link to post
Share on other sites
OzShrimp

hmmm, lol took me a few spoons to reach 5 ml in the thing so fingers crossed lol

Share this post


Link to post
Share on other sites
aussieyankie17

I just bought some so hopefully I can have great results with not shrimp deaths also. :)

Share this post


Link to post
Share on other sites
shrimped

Great to know good information thanks

Share this post


Link to post
Share on other sites
Trav80

After speaking with Dean I purchased some internal Parasite Clear and used it with great results. After 2x of Deans F3/F4 mischlings dropped shrimplets in my tank, I could not see any of the shrimplets after a few says and got worried. I noticed a few planaria on the glass and also a few more on the substrate.

After 2 treatments I noticed the ammonia spike up to 0.5, so I think I had a massive amount of planaria in the substrate. I have not seen any in a few days and the TB and mischling adults are going strong. Sadly the planaria got all of the shrimplets before i treated and I'm pretty sure 3 were Panda/King Kong and one was a Wine Red :(

I can Highly recommend this product, I have previously used No Planaria and Panacur 100 with negative results on my shrimp and tank/media.

Well done Aquotix for sourcing such a fantastic product and well done Dean for testing it so thoroughly and reviewing it.

Share this post


Link to post
Share on other sites
ineke

Thanks for your review Trav80 I need to use it too the little planaria are out during the day even though I have cut way back on feeding. Did you do a big water change prior to using it as the bottle recommends?

Share this post


Link to post
Share on other sites
JohnH

I assumed that bit was a translation error and the water change comes after the treatment. Doesn't make sense to do one before.

Share this post


Link to post
Share on other sites
ineke

That's what I thought but wasn't sure seems strange to do a change first:encouragement:

Share this post


Link to post
Share on other sites
Trav80

I only did around 10% between the two doses I used. I didn't want to do a massive WC just in case it caused issues, but the ammonia spike may have been reduced if I did larger WC. I was not worried about the ammonia spike as my PH is just below 5.0.

Share this post


Link to post
Share on other sites
neosin

anyone know if this kills mini ramshorn snails?

i just want to target planaria

if it does I will have to use non chemical solution :(

Share this post


Link to post
Share on other sites
Trav80

I'm not to sure, the tank I treated is snail free.

Share this post


Link to post
Share on other sites
Kev

Just dose my 3ft tank with these, see how we go.

Share this post


Link to post
Share on other sites
Kev

Just dose my 3ft tank with these, see how we go.

((I think I over dose ;((

Share this post


Link to post
Share on other sites
Kev

Do we need to repeat the dose 2 time? After the first dose?

Share this post


Link to post
Share on other sites
ineke

Kevin I ended up doing 3 doses on 3 tanks And 2 on the others. I had mishling babies in 1 tank and they were fine. :encouragement:

Share this post


Link to post
Share on other sites
CNgo2006
anyone know if this kills mini ramshorn snails?

i just want to target planaria

if it does I will have to use non chemical solution :(

I had just normal pond snails which hitchhiked in on plants, they all dropped now there are white shells everywhere!

Why don't you catch one out and do a test in a container? Poor guinea pig....

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Must Read SKF Articles

  • Register today, ask questions and share your shrimp and fish tank experiences with us!

    Join Our Community!

  • Posts

    • jayc
      It must have been an aluminium heatsink. The Indium in Liquid metal will eat through aluminium. Only copper or nickel plated heatsinks can be used with liquid metal. It says so on the packet, at least my pack of Thermal Grizzly Conductonaut does.
    • jayc
    • kms
      I will try to add all the old tank's shrimps at the end of August to the new tank, had a problem with my chiller this morning, try to make it more efficient by adding a better heat sink grease, I added a liquid metal grease, apparently you can't add liquid metal, when heating up, the heat sink turning to dust, along with part of the cooler inlet and outlet. So far the shrimps are ok.    
    • sdlTBfanUK
      I have had the new shrimps a week and have ordered some new ones(10) for delivery friday. There are probably at least 6 of the 8 alive (they may even all be alive still) but as the tank is so densely planted it is difficult to tell, but I saw 2 black and 2 red this morning, as yesterday, but I'm sure 1 red and  1 black weren't the same as the ones I saw yesterday so there are probably at least 6, if that makes any sense??? Anyway that will be it for now and I will just let the tank and shrimps do there thing once this batch are in there in a couple of days, and I can get back to the usual routine as was, before this unfortunate event wiped out the last lot. All parameters are good, including the nitrates now, but there are a lot of brown patches on the plants and moss balls still......... It all looks a bit drab and uninspiring and brown!!! I probably just need to be a bit more patient? I will do some maintenance tomorrow and a small 2L water change, then the new shrimps will go in on friday after acclimatising. The shrimps were totally uninterested in the spinach or shrimp lolly I put in at the weekend but I am assuming they have so much biofilm at this stage that that is keeping them busy and well fed and they are staying under cover until they get used to their new environment and this strange ugly monster that keeps peering in at them through the glass from time to time? I guess if some 100ft tall bloke kept peering through my window a few times a day I would be a bit nervous/reserved shall we say? I removed the spinach and the shrimp lolly and put the shrimp lolly in the betta tank and within minutes there were 10 shrimp on it so there was definitely nothing wrong with that shrimp lolly! Simon
    • jayc
      Traps don't work on hydra. Even with planaria, it is slow and it doesn't catch them all.
×