Jump to content

White film/algae on heater.


Frosty

Recommended Posts

While I have been cycling my 10 gallon the heater has been building up some clear white film on the bottom cap of my heater I scraped it off but it reappeared in 24 hrs. What is this and is it bad?

Edited by Blazepelt
  • Like 1
Link to comment
Share on other sites

It may be a kind of fungus and I wouldn't worry about that as it should clear itself in the cycle/settling period. It's fairly common that fungus appears when cycling but usually clears even if just left alone and it won't harm anything, just doesn't look very nice. 

Simon

  • Like 3
Link to comment
Share on other sites

On 1/1/2020 at 4:10 AM, Blazepelt said:

While I have been cycling my 10 gallon the heater has been building up some clear white film on the bottom cap of my heater I scraped it off but it reappeared in 24 hrs. What is this and is it bad?

Do you have a female amano shrimp? x

 

  • Like 2
Link to comment
Share on other sites

No he doesn’t. And we don’t have those in Australia. Why did you ask?

  • Like 2
Link to comment
Share on other sites

Funnily enough I am having the same problem in my tank that is cycling atm! It's the exact same, and on the exact same heater!!! Interested to see if it goes away after cycling or is a continuing problem with this heater.

  • Like 2
Link to comment
Share on other sites

It is VERY common to get fungus in a newly set up tank, I think almost everyone has had that and it will clear up in time if left alone.

Simon

  • Like 2
Link to comment
Share on other sites

Cool, good to know. 

Also just noticed that that you hit 1000 posts - Nice!

  • Like 1
  • Thanks 1
Link to comment
Share on other sites

I don't think it affects fish either, it just looks not very nice, though what you have is very mild and unintrusive anyway! It is more an indicator that the tank isn't quite settled/cycled/ready yet! Fish are less delicate than shrimps anyway so you don't need to wait for it to clear, just ignore it and it will eventually vanish!

Simon

  • Like 1
Link to comment
Share on other sites

I took another look at the photo above! If that cap is rubber rather than plastic, it may always look like that when in water and may not actually be fungus anyway? Looking very closely I suspect it is rubber so you may have to get used to that look! If the look bothers you, you can put a plant in front of it as it is at the bottom of the heater anyway.

Simon

Link to comment
Share on other sites

It is rubber. But we are able to rub off the white substance, so it seems to be growing or accumulating on the rubber.

I do think it’s fungal though.

Edited by Crabby
  • Like 1
Link to comment
Share on other sites

Yeah it’s like a gelatinous gooey substance that is easily removed but just floats around. My guppy isn’t eating it so it’s not algae it’s probably as Simon said fungal.

  • Like 2
Link to comment
Share on other sites

the white stuff is melting down and has almost dissapeared overnight! 

☺️

  • Like 2
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Join Our Community!

    Register today, ask questions and share your shrimp and fish tank experiences with us!

  • Must Read SKF Articles

  • Posts

    • sdlTBfanUK
      It has been a few weeks now and I have done a couple of large water changes. I tested the water parameters this morning, GH6 and KH2, TDS 140 and PH 7.5. Obviously the PH is off but there isn't anything in the tank that should cause the PH to rise to this figure so I will just run the tank for another month with 10% weekly water changes (probably just with RO water) and see where we are at that point. The RO water tests at PH6, and the KH and GH in the tank could come down as they are at the upper limits for Caridina shrimps! There are only about 10 very small snails in there at this point, but they seem to be doing well enough.
    • sdlTBfanUK
      I believe these to be very rare in Australia so you may even consider making it a longer term plan and produce your own by starting with the best CRS you can get as that is where the pure lines started! Depends how patient and interested in the project you are, but would save money as well? If I recall correctly it takes from 8 generations of selective breeding? They sell them at micro aquatic shop but do not ship to Western Australia, but that means they are available in Australia. https://microaquaticshop.com.au/products/pure-red-line-grade-ss-shrimp Good luck and just maybe smeone on here may point you in the right direction or be able to supply you with some.
    • Jimmy
      Hi Guys,  Does anyone know where to buy PRL shrimps in WA, not the CRS please. Thanks Regards  
    • Subtlefly
      Yes it’s super accurate to position where I want now and stay there- I am satisfied.  All the fish and shrimpers are doing excellent! Coming up on 4 years running!
    • sdlTBfanUK
      You must be pleased with that, it looks better and is much more robust and less likely to damage or leaks! The tank looks very natural now it has been running for a time. I see the ember tetras, how are the blue shrimp doing, I see a few? The cat and dog look very content and unimpressed, lol.
×
×
  • Create New...