Jump to content
  • Similar Content

    • greysmithy
      By greysmithy
      Hello guys,
      I am curios how a cross-breed would look like between the galaxy pinto and the TB.
      Does anyone here have a picture of the cross-breed? I would love to see how they look.
      I have looked every  were but can't find anything about them.
      Kind regards,
    • Karoluks
      By Karoluks
      Feeling that i have enough experiance to start with taiwan bee colony. Think about new setup for 20-25 taiwan bees.
      What mix with KK`s you guys prefer/offering?
      Now i`m thinking KK + R Rubies, maybe some pintos. Looking forward your ideas :)
    • Shrimp Farm
      By Shrimp Farm
      Hello guys.
      I'd like to share some of my Pinto mix. Hope that U like them. Plis tell me aswell should I start as a part of my chanel english version :)
    • hihat
      By hihat
      I got some nice specimen from my mix-aquarium with TB's, pinto's, taitibees etc, etc, The first 2 photos (I think) must be a mix from a pinto zebra and a kingkong, The red one is probably a red tiger and the same father? I've got 2 of the  blacks and about 10 of the red ones, I have put them apart from the rest and see what the next genereation will be. Sorry for the quality of the photo's, they're just from my iPhone, the macrolens I ordered hasn't arrived yet :-(
      Greetings from the Netherlands

    • cipas
      By cipas
      Hey guys,
      Does anyone breed blue bolts from mischlings ? I've searched for a guide but didn't find one, read a lot about crossbreeding and soon I want to start a project to produce my own blue bolts.
      I need your advices on this.
      Thank you! 
  • Must Read SKF Articles

  • Join Our Community!

    Register today, ask questions and share your shrimp and fish tank experiences with us!

  • Posts

    • sdlTBfanUK
      I'm probably the wrong one to answer this???? Do as JayC stated and only use half dose every 2 days of the fluval cycle. I believe you only need to do a water change if the ammonia goes too high (so remove some ammonia)! I imagine that that product does add ammonia as that is the start of the cycle? The other reason for doing a water change is if the PH drops too low (below 6.5ish) but I doubt this is likely with your high PH reading, at this point anyway! Soil substrates usually lower/buffer the PH but I assume you are using sand or gravel, which is usual with cherry shrimp?  The Indian almond leaves and driftwood should very slowly reduce the PH, though the driftwood isn't yet in the tank of coarse! Hopefully the tank will have already cycled by the time the driftwood is ready to  go in the tank anyway. Simon
    • Brando
      Hi guys thank you for your help.    So i will add the driftwood to lower PH, and add fluval cycle once every 2 days with shrimp in aquarium. Should I do frequent 10-25% water changes if ammonia gets higher from the fluval cycle? I think I might of read somewhere that it will raise the ammonia. Best, Brandon
    • sdlTBfanUK
      As long as the shrimps are active and healthy looking then I think you are ok for now and just carry on trying to 'cycle' as per JayC recommended. There isn't much more you can do without ALL the parameters anyway. Even the strip ones are better than none! But at this point if the shrimp look healthy and active you don't need to stress, just enjoy watching them doing their thing! It would be interesting to know more about the tank and setup if you have time? Simon
    • Crabby
      Okay, great. Yes, it will, so do this. Soak first though in dechlorinated water (warm or boiling if possible) like Simon suggested, to remove any nasties.    They're okay, but we do want to be slowly fixing them. Step one is driftwood for pH, step two is cycling the aquarium for Ammonia, Nitrite, Nitrate.    If you can, please purchase one. There is a good one made by API, quite cheap, will last a while and easy to use/read. This is very important to shrimp. Here it is from aquarium co-op: https://www.aquariumcoop.com/products/api-gh-kh-test-kit-combo
    • Brando
      I have tested high Ph it is 7.6. I do not have a FH/kh testing kit either. Adding the wood would lower the ph a little right? Also, are the parameters I mentioned in my original post safe enough right now. Obviously I want to try and get them a little better!
  • Create New...