Jump to content

How do you stop your shrimp from escaping?


Dooliga

Recommended Posts

Hi,

I am trying to prepare my aquarium for shrimp -- in particular Riffle Shrimp.

After reading that these are escape experts I was momentarily put off the idea because I was aware of definite escape routes that they could easily crawl along and out through. But I'd quickly pushed that reluctance aside to focus on a solution. There has to be one. SKF forum members surely have one.

Escape routes in my set up are: specifically the filter inlet and outlet, along with light attachment clips and wave-maker power cord.

I first thought of perspex cut to fit, but that would be near impossible to fit perfectly and I suspect they only need 2-3 mm to squeeze through? I figured something that was flexible/moldable would be more suitable. I was thinking maybe some fine stainless wire mesh  that's used for moss attachment? But that's probably a bit expensive for the size of the pieces i'd need? Or flywire? Or perhaps some security door screen, but i'd be worried about paint leeching into the water as that stuff may likely rust with time? 

Anyone have any ideas? I couldn't find a thread/topic when I searched of 'shrimp escaping'. I'm pretty sure someone here has a simple solution. What do you do to stop your shrimp escaping?

D

Apologies to Admin: I originally thought to add this to my thread on Riffles as I thought it was appropriate under the topic of planning a tank set up for them, but I was unable to add a further photo to illustrate what I'm trying to find a solution for (I'd reached the image upload limit). I figure this topic fits under 'Shrimp Health & Care'. Please move or delete or edit as you see fit. Thank you.



 

Link to comment
Share on other sites

@Dooliga,

Make sure you leave sufficient space between the water surface and top of the tank.

I use a triangular plastic piece cut out of clear Binding Covers A4 sheets. It's placed in the corners where the filter hoses are. https://www.officeworks.com.au/shop/officeworks/p/cumberland-binding-covers-a4-clear-100-pack-cuombsa4

We have these at work ? 

Cost = $0

 

Riffles generally climb out at the corners if there is a cable or pipe there.


A picture,  speaks a 1000 words. So I'll try taking one tonight when I get home from work.

But here is a drawing to start with. 

Untitled.jpg.ac3ae2a78c93e368a120099a089fd006.jpg

It's just a triangular plastic piece. Cut along the dotted line's to create a circular hole in the middle for the filter pipe. Slide this over are each corner where there are cables or hoses coming out.

 

Edited by jayc
Link to comment
Share on other sites

Thank you Jayc, 

What you are describing makes a lot of sense, is cheap and I can envisage that it's effective.  But, if you have time may I see a pic please?

Cheers,

D

Link to comment
Share on other sites

2 hours ago, Dooliga said:

if you have time may I see a pic please?

Thanks for the reminder. Wasn't even sure you saw my post above.

 

2 hours ago, Dooliga said:

makes a lot of sense, is cheap

Hey! that's me to the letter.

 

Link to comment
Share on other sites

This is what I use on one corner...

20180208_083024.thumb.jpg.f55561bdb4d71d5dc12be457582e4017.jpg20180208_083115.thumb.jpg.495b0afc99d7bf74f084fbee9171328c.jpg

 

 

The following was the prototype, which  I still use because it is easier to remove and replace, thanks to the larger channel cutout. I use it occasionally when I need to remove the pipes often, say like during cleaning time. You see the final product above was much more refine than the prototype.

20180208_083327.thumb.jpg.5347fd2d0889e192c943a45dff03c19e.jpg

 

  • Like 2
Link to comment
Share on other sites

Thanks jayc, 

Pretty sure i can come up with something that will work in my set up. 

1 hour ago, jayc said:

Wasn't even sure you saw my post above.

I hadn't replied as I was processing your response to my overall plan for the tank's set up. I've been checking the forum multiple times a day since I made that first post and reading more (enjoying it, very inspiring). Sorry I didn't reply sooner.

I hope the above helps some others too. Find it interesting that other's haven't chimed in with what they do.

Cheers,

 

  • Like 1
Link to comment
Share on other sites

7 hours ago, Dooliga said:

Pretty sure i can come up with something that will work in my set up. 

If you improve on it, let us know.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Join Our Community!

    Register today, ask questions and share your shrimp and fish tank experiences with us!

  • Must Read SKF Articles

  • Posts

    • beanbag
      Update to say that after a few gravel vacs, front wall scrub, moss / floating plant trim, that the condition seems to have improved.  My current theory is that it is due to waste / debris management, where "stuff" like that brown mulm accumulates in the substrate and behind the HMF filters.  Maybe some tanks can somehow deal with it, but mine can't.  Also another experienced shrimper suggested that maybe those "shell bugs" don't just live on the shrimps but also in this debris.  Maybe this is the reason some tanks fail due to "old tank syndrome" where all they need is a good gravel vac? Also, I am guessing that plant trim helps too because now more of the nutrients and light go into growing algae instead of more plants? Well anyway for this tank I will try weekly water change and monthly gravel vac / plant trim.  For my next tank, I'm thinking of something like an under-gravel system where this mulm can fall down and I vac it out.
    • sdlTBfanUK
      Good to have an update and good to hear you are getting shrimplets, so hopefully your colony will continue and you may not get to the point where you have to cull some to stop over population. These type of shrimp only live 12 - 18 months so the adult deaths may be natural? If you have the time I would do weekly 25% water changes, adding the new water via a drip system and do some vacuuming clean of the substrate each week, even if only a different bit each week! See if that helps in a few months and if it does then stick with that regime? It should help reduce any build-ups that may be occuring!
    • beanbag
      Hello again, much belated update: The tank still has "cycles" of 1-2 month "good streaks" where everybody seems to be doing well, and then a bad streak where the short antenna problem shows up again, and a shrimp dies once every few days.  I am not sure what causes things to go bad, but usually over the course of a few days I will start to see more shrimp quietly standing on the HMF filter, and so I know something is wrong.  Since I am not "doing anything" besides the regular 1-2 week water changes, I just assume that something bad is building up.  Here's a list of things that I've tried that are supposed to be "can't hurt" but didn't prevent the problem either: Dose every other day with Shrimp Fit (very small dose, and the shrimp seem to like it) Sotching Oxydator Seachem Purigen to keep the nitrates lower Keeping the pH below 5.5 with peat Things that I don't do often, so could possibly "reset" the tank back to a good streak, are gravel vac and plant trim, so maybe time to try those again. One other problem I used to have was that sometimes a shrimp would suddenly stop eating with a full or partially full digestive tract that doesn't clear out, and then the shrimp will die within a few days.  I suspected it was one of the foods in my rotation - Shrimp Nature Infection, which contains a bunch of herbal plant things.  I've had this in my food rotation for a few years now and generally didn't seem to cause problems, but I removed it from the rotation anyway.  I don't have a lot of adult Golden Bees at this point so I can't really tell if it worked or not. Overall the tank is not too bad - during the good streaks occasionally a shrimp will get berried and hatch babies with a 33-50% survival rate.  So while there are fewer adults now, there are also a bunch of babies roaming around.  I guess this tank will stagger on, but I really do need to take the time to start up a new tank.  (or figure out the problem)
    • jayc
      If that is the offspring, then the parents are unlikely to be PRL. I tend to agree with you. There are very few PRLs in Australia. And any that claim to be needs to show proof. PRL genes have to start as PRL. CRS that breed true after x generations doesn't turn it into a PRL. Neither can a Taiwan bee shrimp turn into a PRL despite how ever many generations. I've never seen a PRL with that sort of red colour. I have on Red Wines and Red Shadows - Taiwan bee shrimps. So somewhere down the line one of your shrimp might have been mixed with Taiwan bees and is no longer PRL. It just tanks one shrimp to mess up the genes of a whole colony. 
    • sdlTBfanUK
      Sorry, missed this one somehow! The PRL look fantastic and the odd ones look part PRL and part Red wine/Red shadow in the colour. They are still very beautiful but ideally should be seperated to help keep the PRL clean if you can do that.  Nice clear photos!
×
×
  • Create New...