Jump to content

RO - DIY mix to include KH rise


Tayloss

Recommended Posts

HI All,

I have been using @jayc DIY mix for my CRS for sometime now after finding all the chemicals here in the UK, and have seen some great improvements over the SS GH+ I was using... Certainly a cheaper solution than commerically made products!! Kudos to you for coming up with the recipe..

So, I now want to use the DIY mix for Neo's and have the ability to raise the KH in order to bring it in line with the KH/GH products. Just for reference, I didnt include the Iron or Manganese as I don't have many plants in the tank.. They don't seem to have suffered!

Which element can I replace with Calcium Carbonate to add some KH to the tank as the mix currenly mixes at PH of 6, which is fine for where I need it for the CRS, but I'd like to have the KH around 3-4 with an inert substrate I dont know how else to raise it without using tap water?

Thanks in advance.

Chris

Link to comment
Share on other sites

40 minutes ago, Tayloss said:

have seen some great improvements over the SS GH+ I was using... Certainly a cheaper solution than commerically made products!! Kudos to you for coming up with the recipe..

That's great to hear Tayloss. It's cheaper AND an improvement over commercial products. Can't beat that.

The trace elements are purely optional, but it's not just for plants. It's not economical buying a whole box/bottle of trace elements for the amount used. I just had some in my garden shed, so I added a bit. However, I have no evidence the shrimp needs it. They get enough trace elements from a well balanced diet.

 

40 minutes ago, Tayloss said:

Which element can I replace with Calcium Carbonate to add some KH to the tank as the mix currenly mixes at PH of 6, which is fine for where I need it for the CRS, but I'd like to have the KH around 3-4

  1. Just so I don't mess up the remin mix and ratios, can you tell me exactly what you use and how much? 
  2. Are you 100% sure you are using Calcium Carbonate, and not Calcium Sulphate?
  3. Can you also tell me what KH you are getting from the mix in 1L of RO water? <-- This will aid in getting the updated mix just right. (Don't measure tank water parameters, it's got to be in a controlled environment, so use RO water).

 

As a general rule, more Carbonates will increase KH. So more Calcium Carbonate (CaCO3) and a bit of Potassium Carbonate (K2CO3) will raise KH and pH.

 

Edited by jayc
Link to comment
Share on other sites

10 hours ago, jayc said:

That's great to hear Tayloss. It's cheaper AND an improvement over commercial products. Can't beat that.

The trace elements are purely optional, but it's not just for plants. It's not economical buying a whole box/bottle of trace elements for the amount used. I just had some in my garden shed, so I added a bit. However, I have no evidence the shrimp needs it. They get enough trace elements from a well balanced diet.

 

  1. Just so I don't mess up the remin mix and ratios, can you tell me exactly what you use and how much? 
  2. Are you 100% sure you are using Calcium Carbonate, and not Calcium Sulphate?
  3. Can you also tell me what KH you are getting from the mix in 1L of RO water? <-- This will aid in getting the updated mix just right. (Don't measure tank water parameters, it's got to be in a controlled environment, so use RO water).

 

As a general rule, more Carbonates will increase KH. So more Calcium Carbonate (CaCO3) and a bit of Potassium Carbonate (K2CO3) will raise KH and pH.

 

Thanks for the prompt reply, and I'll try and answer the questions above in order

  1. So I followed your recipe exactly using the following: 55g Calcium Sulphate Di-Hydrate 37g Magnesium Sulphate Heptahydrate 11g Potassium Sulphate. Using my bottle/syringe this equals to 65 drops per litre to equal 140-145TDS
  2. I am not using anything as yet, just look for something to raise KH and saw Calcium Carbonate, but have seen Calcium Sulphate for home brewing too!
  3. As above for TDS based on 1L is GH 6-8, KH 0, PH 6

As far as I can tell, your mixure isnt designed to increase KH but to just add some GH/TDS to the water?

 

Edited by Tayloss
Link to comment
Share on other sites

26 minutes ago, Tayloss said:

As far as I can tell, your mixure isnt designed to increase KH but to just add some GH/TDS to the water?

Correct. Because it is far easier to raise KH with some carbonates then it is to remove it. 

So for Neocaridina water parameters, you can add 25% tap water.

But if you want to avoid tap water, which I always recommend we avoid, then we need to adjust the mix.

 

26 minutes ago, Tayloss said:

I am not using anything as yet, just look for something to raise KH and saw Calcium Carbonate, but have seen Calcium Sulphate for home brewing too!

Gotcha.

 

Calcium Carbonate is the right ingredient to add to my DIY mix to raise KH for Neocaridina.

Adjust my DIY mix to:

40g Calcium Sulphate Di-Hydrate

20g Calcium Carbonate (CaCO3)

37g Magnesium Sulphate Heptahydrate

11g Potassium Sulphate 

You can probably get CaCO3 at home brew shops as well.

 

 

Alternatively you can adjust the mix to the following:

60g Calcium Sulphate Di-Hydrate

37g Magnesium Sulphate Heptahydrate

11g Potassium Carbonate (K2CO3)

 

You'll note I have raised Calcium up to 60g total. That's my latest formula from recent tweaks.

Edited by jayc
Link to comment
Share on other sites

Gotcha.

 

Calcium Carbonate is the right ingredient to add to my DIY mix to raise KH for Neocaridina.

Adjust my DIY mix to:

40g Calcium Sulphate Di-Hydrate

20g Calcium Carbonate (CaCO3)

37g Magnesium Sulphate Heptahydrate

11g Potassium Sulphate 

You can probably get CaCO3 at home brew shops as well.

Yes, I’ve seen CaCO3 in our local brewing shop, so won’t be hard to purchase and add.. so in the above, I’m still adding 60g to make the 108g total but adding 40/20g of CaCO3 on top of the existing recipe.. whats the advantage/disadvantaged to each? Should I mix both and test the levels?

 

 

Alternatively you can adjust the mix to the following:

60g Calcium Sulphate Di-Hydrate

37g Magnesium Sulphate Heptahydrate

11g Potassium Carbonate (K2CO3)

 

You'll note I have raised Calcium up to 60g total. That's my latest formula from recent tweaks.

I’m currently cycling the tank with tap water, but plan to start the WC with pre-mixed RO.. as the TDS is around 350, should I do a 50% change WC with pure RO and then start to sort the final TDS/KH/GH with the mixes above, or just do a 90% with the RO mixes to 140-160?

 

Whats the affect on adding an additional 5g of calcium, aline the CA:MG?

 

Thanks for your help and assistance:-)

 

 

 

Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

6 hours ago, Tayloss said:

so in the above, I’m still adding 60g to make the 108g total but adding 40/20g of CaCO3 on top of the existing recipe

You are still adding a TOTAL of 60g of Calcium, made up of 40g Calcium Sulphate and 20g Calcium Carbonate.

 

If you use 60g of Calcium Carbonate, the KH and pH will be too high.

 

6 hours ago, Tayloss said:

the TDS is around 350, should I do a 50% change WC with pure RO and then start to sort the final TDS/KH/GH with the mixes above, or just do a 90% with the RO mixes to 140-160?

The latter. if you are changing that much water, you might as well change 90% and get the levels right straight out.

Then slowly acclimate the shrimp back to the new water. I assume you know how to drip acclimate shrimp, so I won't go into that detail.

 

6 hours ago, Tayloss said:

Whats the affect on adding an additional 5g of calcium, aline the CA:MG?

It was a recent tweak to my DIY recipe. Yes, it gives a closer ratio to the ideal 4:1 Ca:Mg.

 

Link to comment
Share on other sites

Cool, let me order some in and will make the mix to see what I get.. Do you have any idea on the TDS/KH/GH balance?

Ideally at a TDS of 140, I'd like GH 6-8, KH 3-4, PH 7-7.5 - Would that seem about right for Neo's?

Link to comment
Share on other sites

15 hours ago, Tayloss said:

Do you have any idea on the TDS/KH/GH balance?

It's best to test your mix, as a number of things can influence the result. 

Let me know what the result is.

 

15 hours ago, Tayloss said:

Ideally at a TDS of 140, I'd like GH 6-8, KH 3-4, PH 7-7.5 - Would that seem about right for Neo's?

Seems about right. But I like to aim for pH of 6.8 - 7.0 personally.

TDS can be higher for Neos. Up to 200 TDS

 

Link to comment
Share on other sites

11 hours ago, jayc said:

It's best to test your mix, as a number of things can influence the result. 

Let me know what the result is.

Okay, I have ordered a small pack from online and will let you know of the test results once it arrives :-)

12 hours ago, jayc said:

Seems about right. But I like to aim for pH of 6.8 - 7.0 personally.

TDS can be higher for Neos. Up to 200 TDS

 

Is that up to 200 or can they reach 250 type level, but not recommended? They are going to be Blue Velvet Shrimps as they are my favourite. :-)

Link to comment
Share on other sites

11 hours ago, Tayloss said:

Is that up to 200 or can they reach 250 type level, but not recommended?

Keep it UP TO 200. They might survive higher TDS levels but I don't want to recommend it as a normal practice.

Link to comment
Share on other sites

Good news! Calcium carbonate arrived today.. so going to mix on Saturday, so will post the results..


Sent from my iPhone using Tapatalk

  • Like 1
Link to comment
Share on other sites

Hi Jayc,

I’ve mixed together the formula above, and didn’t quite get the results I was expecting..

So, this is the CaCO3 I’m using :
3e019c1ed3cc6230f31fba2c256eab82.jpg

Which created this white liquid:
758cf7d57e21fb5617b5bc11bb13f5b7.jpg
All seemed to mix together nicely and nothing appeared to be left over not dissolved..

However, I added 1ml to 1l of RO and the water turned and stayed cloudy:
2ada068cf8e2497f5837e1cfdb6ca708.jpg

I continued to test anyway to give an idea of the final parameters, so

TDS 160
GH 8
KH 2
Ph (pen) 9
Liquid (NT Lab) 8 - see below...

9c984a07d42873ecee8e776cc6cb4bc2.jpg

Have I messed something up in this mix or is it wrong type of CaCO3 as that is the only difference between the two mixes..

Is the cloudy water due to the Calcium?


Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

On 11/19/2017 at 1:26 AM, Tayloss said:

TDS 160
GH 8
KH 2
Ph (pen) 9
Liquid (NT Lab) 8

TDS, KH and GH is almost perfect. But pH is high. Is your pH pen calibrated?

Did you test pH of the water before adding the mix?

How much water did you add to the bottle with the mix in it? 500ml? Try adding more pure RO into the bottle to dilute it.

20gm of CaCO3 might be too much, try reducing it to say 15gm for your next batch. 

The white cloudy liquid is normal and won't be an issue in a tank. 

 

Edited by jayc
Link to comment
Share on other sites

TDS, KH an GH is almost perfect. But pH is high. Is your pH pen calibrated?
Did you test pH of the water before adding the mix?
How much water did you add to the bottle with the mix in it? 500ml? Try adding more pure RO into the bottle to dilute it.
20gm of CaCO3 might be too much, try reducing it to say 15gm for your next batch. 
The white cloudy liquid is normal and won't be an issue in a tank. 
 

Yes, I added to 500ml of RO.

Have now added an extra 250ml to make it 750ml and will retest this afternoon and get back to you!

Pen was calibrated, but I don’t find them that accurate at the best of times.. but will do it again before testing the next test mix..


Sent from my iPhone using Tapatalk
Link to comment
Share on other sites

Just a bit of an update.. I’ve had to bin the original mix as it was too cloudy and never cleared in the tank, so am going to make another mix with less CaCO3...

Do I up the Calcium Sulphate when reducing the CaCO3 to ensure it always meets 60g


Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

1 hour ago, Tayloss said:

I’ve had to bin the original mix as it was too cloudy and never cleared in the tank, so am going to make another mix with less CaCO3

That's strange. The amount used should not even be perceivable in a tank. I can't imagine that you would be using so much that the tank remains cloudy even after an hour.

 

And yes, up Calcium sulphate when adding Calcium carbonate to always meet 60g calcium.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Join Our Community!

    Register today, ask questions and share your shrimp and fish tank experiences with us!

  • Must Read SKF Articles

  • Posts

    • beanbag
      Update to say that after a few gravel vacs, front wall scrub, moss / floating plant trim, that the condition seems to have improved.  My current theory is that it is due to waste / debris management, where "stuff" like that brown mulm accumulates in the substrate and behind the HMF filters.  Maybe some tanks can somehow deal with it, but mine can't.  Also another experienced shrimper suggested that maybe those "shell bugs" don't just live on the shrimps but also in this debris.  Maybe this is the reason some tanks fail due to "old tank syndrome" where all they need is a good gravel vac? Also, I am guessing that plant trim helps too because now more of the nutrients and light go into growing algae instead of more plants? Well anyway for this tank I will try weekly water change and monthly gravel vac / plant trim.  For my next tank, I'm thinking of something like an under-gravel system where this mulm can fall down and I vac it out.
    • sdlTBfanUK
      Good to have an update and good to hear you are getting shrimplets, so hopefully your colony will continue and you may not get to the point where you have to cull some to stop over population. These type of shrimp only live 12 - 18 months so the adult deaths may be natural? If you have the time I would do weekly 25% water changes, adding the new water via a drip system and do some vacuuming clean of the substrate each week, even if only a different bit each week! See if that helps in a few months and if it does then stick with that regime? It should help reduce any build-ups that may be occuring!
    • beanbag
      Hello again, much belated update: The tank still has "cycles" of 1-2 month "good streaks" where everybody seems to be doing well, and then a bad streak where the short antenna problem shows up again, and a shrimp dies once every few days.  I am not sure what causes things to go bad, but usually over the course of a few days I will start to see more shrimp quietly standing on the HMF filter, and so I know something is wrong.  Since I am not "doing anything" besides the regular 1-2 week water changes, I just assume that something bad is building up.  Here's a list of things that I've tried that are supposed to be "can't hurt" but didn't prevent the problem either: Dose every other day with Shrimp Fit (very small dose, and the shrimp seem to like it) Sotching Oxydator Seachem Purigen to keep the nitrates lower Keeping the pH below 5.5 with peat Things that I don't do often, so could possibly "reset" the tank back to a good streak, are gravel vac and plant trim, so maybe time to try those again. One other problem I used to have was that sometimes a shrimp would suddenly stop eating with a full or partially full digestive tract that doesn't clear out, and then the shrimp will die within a few days.  I suspected it was one of the foods in my rotation - Shrimp Nature Infection, which contains a bunch of herbal plant things.  I've had this in my food rotation for a few years now and generally didn't seem to cause problems, but I removed it from the rotation anyway.  I don't have a lot of adult Golden Bees at this point so I can't really tell if it worked or not. Overall the tank is not too bad - during the good streaks occasionally a shrimp will get berried and hatch babies with a 33-50% survival rate.  So while there are fewer adults now, there are also a bunch of babies roaming around.  I guess this tank will stagger on, but I really do need to take the time to start up a new tank.  (or figure out the problem)
    • jayc
      If that is the offspring, then the parents are unlikely to be PRL. I tend to agree with you. There are very few PRLs in Australia. And any that claim to be needs to show proof. PRL genes have to start as PRL. CRS that breed true after x generations doesn't turn it into a PRL. Neither can a Taiwan bee shrimp turn into a PRL despite how ever many generations. I've never seen a PRL with that sort of red colour. I have on Red Wines and Red Shadows - Taiwan bee shrimps. So somewhere down the line one of your shrimp might have been mixed with Taiwan bees and is no longer PRL. It just tanks one shrimp to mess up the genes of a whole colony. 
    • sdlTBfanUK
      Sorry, missed this one somehow! The PRL look fantastic and the odd ones look part PRL and part Red wine/Red shadow in the colour. They are still very beautiful but ideally should be seperated to help keep the PRL clean if you can do that.  Nice clear photos!
×
×
  • Create New...