Jump to content

Algae scrubber


revolutionhope

Recommended Posts

I'm looking for advice, tips and recommendations on a good Glass cleaner / algae scrubber. The one I have is getting very long in the tooth and I don't think it ever did a great job.

 

Cheers :-)

 

[emoji173][emoji111][emoji445]

will

 

 

Link to comment
Share on other sites

Thanks@jayc - I've been using a magnetic one thus far but it tends to skip along as you use it which creates disturbance and can kick up detritus and mulm when you're using it near the substrate. I think i might grab one of these..

[emoji173][emoji111][emoji445]
will

Link to comment
Share on other sites

1 minute ago, revolutionhope said:

magnetic one

Magnetic ones are ok to use, I find you need to go over the glass multiple times to get stubborn algae.

This one I linked with a blade is pretty much a one pass cleaner. No going back and forth, creating massive disturbances in the tank.

I can run a siphon hose behind the blade as I clean the glass and suck out the loosened algae, and perform a water change at the same time.

  • Like 2
Link to comment
Share on other sites

@neo-2FX ooo I use these too! and no they dont scratch the glass :) Just stay awake from the silicones one the edges :P

Link to comment
Share on other sites

And ALWAYS scrape perpendicular to the glass. 

If you know what I mean. 

It's not a knife, so don't slice along the blades length like a knife.

Edited by jayc
Link to comment
Share on other sites

On 7/29/2017 at 1:44 PM, revolutionhope said:

Thanks@jayc - I've been using a magnetic one thus far but it tends to skip along as you use it which creates disturbance and can kick up detritus and mulm when you're using it near the substrate. I think i might grab one of these..

emoji173.pngemoji111.pngemoji445.png
will
 

I have 3 different magnet scrapers and find i get the skip if i use the stronger one on the thinner glass tanks. The downside to using a weaker magnet has been mentioned. You need more passes to remove the stubborn algae.

  • Like 1
Link to comment
Share on other sites

I use this algae scraper (magnet) that I got from TechDen

http://www.thetechden.com.au/Tunze_Pico_Care_Magnet_0220_006_Up_to_6mm_Glass_Al_p/0220.006.htm

There are a few different sizes.

It works tons better than the magnet cleaners with velcro like material on one side. These scrapers work very much like the one JayC posted but with a magnet. I use these both with the magnet and sometimes just hold the scraper part in my hand and go elbow deep into a tank Lol

  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Join Our Community!

    Register today, ask questions and share your shrimp and fish tank experiences with us!

  • Must Read SKF Articles

  • Posts

    • sdlTBfanUK
      It has been a few weeks now and I have done a couple of large water changes. I tested the water parameters this morning, GH6 and KH2, TDS 140 and PH 7.5. Obviously the PH is off but there isn't anything in the tank that should cause the PH to rise to this figure so I will just run the tank for another month with 10% weekly water changes (probably just with RO water) and see where we are at that point. The RO water tests at PH6, and the KH and GH in the tank could come down as they are at the upper limits for Caridina shrimps! There are only about 10 very small snails in there at this point, but they seem to be doing well enough.
    • sdlTBfanUK
      I believe these to be very rare in Australia so you may even consider making it a longer term plan and produce your own by starting with the best CRS you can get as that is where the pure lines started! Depends how patient and interested in the project you are, but would save money as well? If I recall correctly it takes from 8 generations of selective breeding? They sell them at micro aquatic shop but do not ship to Western Australia, but that means they are available in Australia. https://microaquaticshop.com.au/products/pure-red-line-grade-ss-shrimp Good luck and just maybe smeone on here may point you in the right direction or be able to supply you with some.
    • Jimmy
      Hi Guys,  Does anyone know where to buy PRL shrimps in WA, not the CRS please. Thanks Regards  
    • Subtlefly
      Yes it’s super accurate to position where I want now and stay there- I am satisfied.  All the fish and shrimpers are doing excellent! Coming up on 4 years running!
    • sdlTBfanUK
      You must be pleased with that, it looks better and is much more robust and less likely to damage or leaks! The tank looks very natural now it has been running for a time. I see the ember tetras, how are the blue shrimp doing, I see a few? The cat and dog look very content and unimpressed, lol.
×
×
  • Create New...