I have a ton of extra Java moss that I got from a lfs near me. I covered all of my driftwood already and made some stainless steal mesh carpets with them.
What else should I do with them ? Can I just leave them free floating in my tank ?
Thanks for any suggestions !
So I currently have a 6 gallon planted tank that has been set up and running for 3 weeks. Im about to purchase my red cherry shrimp to put in this tank. There is plenty of algae in the tank for them to eat, so food should be fine for the beginning correct? Plus it is heavily planted meaning there is plenty of organic matter to be consumed at all times, so they shouldn't really need to be fed ever? Also i see that drip acclimation is best for getting them used to there new home. If i did this till the tank is half empty for provided them with as close conditions as possible without emptying the tank. Am i good to just refill the tank afterward or from now on when i do water changes do they all need to be dripped in? Also is it true that adding calcium to the tank is beneficial for the shrimp to molt?
Im a pretty experienced fish keeper, just haven't ever had with shrimp so I dont want to kill all these expensive shrimps due to lack on knowledge. Any more knowledge or advice that can be given to me is high encouraged, even if it seems simple.
Some specs of the tank, tanks does have a filter, that has small openings that could suck up baby shrimp. Its a small filter and has algae growth on the openings so it really does reduce the flow a bit, where i dont see it becoming a huge issue. The tank is co2 injected, but thats pretty nailed down so nuking them with co2 is highly unlikely. The tank has a soil bottom capped with coarse sand. The vast majority of the bottom of the tank is carpeted with plants but they still have a way to go. There is no lid on the top of the tank. The tank does have some natural river stones in it with the brown algae growth on them. And a lot of the plants have the white "bugger" algae growing on them or around them. The tank receives about 10 hours of light a day. I know i put a lot of un-important information here, but maybe a pro will see a problem here and be able to inform me so I can correct it. Thanks for your time and consideration in advance!!!!
Ive done alot of research but let me explain my set up for you. I have a 6 gal tank that is approx 12 inch tall. It is a fertilized and currently has a DIY co2 on it, i did this by taking a 2 liter bottle and adding sugar and yeast, it is connected to a special co2 bubble (whatever they are called). The tank also has high lighting and is completely planted carpeted and bigger plants. Im about to be adding in my cherry shrimp and know that gassing them with co2 is possible at night. And im wanting to avoid this of course. Yet i dont want to spend alot of money upgrading my co2 system. The co2 bubblier is only 8-9 inchs from the water line. The majority of the bubbles reach the surface meaning not all the co2 is dissolving or there are other gasses present. Im wondering if I can get away with this co2 delivery system. Or what simple upgrades could be made so that it doesn't run at night? from what i understand it would be at night i would gas the shrimp? Also I do a 50% water change 1 if not 2 times a week.
Options ive thought of-
1. Instead of a 2 liter bottle maybe like a 12 oz bottle, scale back the yeast and sugar so there is less co2 being produced
2. Releasing the pressure in the DIY bubblier before bed. so it would take maybe 4-6 hour for the pressure to build up again and start bubbling
3. Upgrading system (Dont want to do this really, but i though of it)
My tank looks like it full of marine snow. I am not sure if it's a good or bad thing. I also have 5 or 6 tiny white worms flailing about in the water, they are maybe 1cm at most. My tank is plants only right now and it's been setup for 6-8 weeks. Should I be concerned?
Many aquatic keepers combine their passion for plants and shrimp in the one tank. One common question for newcomers is how to keep the shrimp safe in a planted tank that requires fertilizers. Why is this important? Well, how do you know what's safe, what's not, how it affects water parameters, what's not recommended, premixed liquid vs dry and the list goes on and on.
One SKF Aquatics member, @Brentwillmers, found the following as a safe method for Taiwan Bee shrimp in his planted aquariums.
Using only use R/O water with salty shrimp GH to a TDS of 80-90, the fertilizer dosing schedule is a mix of liquid and dry powders. This mix depends on availability and cost. Micro-Mix supplies a broad range of trace elements demonstrated to be necessary for proper plant health and growth.
The following dosage of Micronutrients was found to be safe for his Taiwan Bee shrimp:
Iron: 0.5ppm Magnesium: 0.80ppm Zinc: 0.002ppm Manganese: 0.001ppm Boron: 0.002ppm Molybdenum: 0.003ppm Cobalt: 0.00002ppm For trace elements, Seachem Trace, Aquavitro envy or a dry powder using a product such as Plantex CSM+Boron can be used. Often people will choose to dose chelated iron separately from other trace elements, though most commercial trace mixes do include some level of chelated iron. For this reason, Aquavitro propel is preferred.
However, with some micro-mixes be aware of the copper concentration as these can be fatal for your shrimp.
Micro-nutrients can be used alone or in conjunction with a macro-nutrients nitrogen, phosphorus and potassium. Liquid Seachem Nitrogen can be used or a dry powder form via adding the compound Potassium Nitrate (KNO3). Try to keep the levels at around 10ppm in low, medium and high light aquariums. Do not exceed 20ppm!! If you do stop dosing and do a water change and test again.
Liquid Seachem Phosphorus or a powder form as Monopotassium Phosphate or KH2PO4 can be used in the aquarium but keep the levels low. It's best used in low, medium and high light aquariums and kept at around 0.5ppm. Always keep these levels low as possible it can be harmful to shrimp.
Seachem Potassium or powdered potassium sulfate, or K2SO4 can be used. Keep the dose to around 10ppm in low to medium light aquarium and 20ppm with high light aquariums. Do not exceed 20ppm as it can be harmful to more sensitive shrimp.
Dosing macro's 3 times per week and micro's 3 times a week alternating between days generally works well. You can find the perfect balance by dosing in the mornings and performing water test before lights out. On day 7 it’s important to do a water change, 50% weekly is recommended to reset water parameters.
Unfortunately, a 50% water change will cause TDS levels to fall quickly. One method to minimize the rate in reduction is to perform 2 lots of 30% water changes (morning and afternoon) instead of a single 50%. The PH of the new water should be as close to your aquarium PH as possible. TDS will increase again after each dose of fertilizers so keep this in mind when adding remineralization to R/O water.
Some methods of dosing are:
Estimative Index (EI) Dosing Target Dosing PPS Pro Dosing EI method:
EI dosing involves dosing each individual macro and a trace mix up to a high level throughout a week and at the end of the week, a 50% water change is performed, cutting the remaining nutrients in half, and the tank is dosed again. This is a simple way to insure you never bottom out on any nutrients. However, not a great idea for shrimp.
Target Dosing (preferred method):
Target dosing involves performing water tests on nitrate, potassium, phosphate and iron levels, dosing as per the target levels for your tank.
PPS Pro Dosing:
PPS Pro dosing involves dosing the tank with the amount of each nutrient needed during a 24-hour cycle. It requires daily dosing, but is great for keeping the tank from having excess nutrients which can cause algae issues. It does involve some math and some pretty small measurements, but is a very effective way to dose.
Whatever the dosing method, one key point to remember is that everything is dependent on CO2, lighting and plants. Hope you enjoyed this article and happy shrimping.
References and Content/Image Credit
SKF Aquatics member - @Brentwillmers