Jump to content
Sign in to follow this  
Zebra

DIY co2 done the right way.

Recommended Posts

Zebra

Hello,

So I made this little tank and stand a few weeks back to go in my shed.

It gets way to hot in here to have a normal co2 cylinder and I don't have a spare one floating around anyway, but I have lots of bits and pieces,

So I made this:

 

The reactor, Filter, night time shut off and proper needle valve to ensure the co2 level is constant and never rises.

IMG_1088.JPG

A diy wooden diffuser I made producing very fine pollen style bubbles.

IMG_1245.PNG

The only thing I would add if I could is a pressure relief valve, you can buy cheap kits off eBay that have one of these and a gauge, but this system doesn't seem to need it.

Im also using a recipe I adapted from mycology research utilising sugars with more complex carbohydrates to give a more stable long term reaction, I started this recipe on the 28th of dec and it's still going strong.

I had to remove the built in check valve from the other side of my needle valve (cause it's made for high pressure) it prevented co2 running to the diffuser at start up, and caused pressure to build up. I just used a standard air line check valve that requires less pressure to open and it's all working fine again. Atleast now I know standard airline push fittings hold up under the pressure, literally. I have used proper co2 tubing throughout, it's probably not needed considering this is a "constant" system but I had it laying around.

The the solenoid valve which runs my "night time shut off" operates a bit different to a standard pressurised co2 system.

I designed my solenoid on a T to the main line, It opens at night just venting co2 into the air instead of running into the tank, this is so pressure doesn't build up and wreck the whole system. 

My fav part is the diffuser TBH,

I'm so fascinated by wooden diffusers.

enjoy.

Edited by Zebra
  • Like 2

Share this post


Link to post
Share on other sites
KeenShrimp

Nice @Zebra, so whatcha brewin' as a fortuitous byproduct? ?

  • Like 1

Share this post


Link to post
Share on other sites
Zebra

Haha not sure yet mate, I'll see how it tastes when it stops producing co2 lol

Maybe add some lemon next time.

  • Like 1

Share this post


Link to post
Share on other sites
Zebra

Update:

Im emptying and refilling the fermentation chamber tonight.

Its still producing decent co2 but has just started dropping off today, so I'm just gonna refill it, 

It lasted from the 28th Dec till now which I think is pretty good. 

Share this post


Link to post
Share on other sites
Zebra

@KeenShrimp I tasted a bit before I made the new batch haha, 

It was highly alcoholic, just tasted like kind of sour beer, I don't think it would be too hard to make it taste decent haha.

  • Like 1

Share this post


Link to post
Share on other sites
Cesar

Nice! I would wrap my bottle with a towel as I found that more CO2 was produced when the bottle is kept warm... Fermentation of the yeast and sugar slows down with colder temps, later I found a bottle with zipper neoprene cover and I modified the top to fit an airline...

As far as diffusion, I would just stick the other end of the airline straight into the Fluval intake, the intake propeller would dice up the bubbles and infusion would happen in the canister filter...

HTH

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Content

    • TheKeeper
      By TheKeeper
      So I currently have a 6 gallon planted tank that has been set up and running for 3 weeks. Im about to purchase my red cherry shrimp to put in this tank. There is plenty of algae in the tank for them to eat, so food should be fine for the beginning correct? Plus it is heavily planted meaning there is plenty of organic matter to be consumed at all times, so they shouldn't really need to be fed ever? Also i see that drip acclimation is best for getting them used to there new home. If i did this till the tank is half empty for provided them with as close conditions as possible without emptying the tank. Am i good to just refill the tank afterward or from now on when i do water changes do they all need to be dripped in? Also is it true that adding calcium to the tank is beneficial for the shrimp to molt?
      Im a pretty experienced fish keeper, just haven't ever had with shrimp so I dont want to kill all these expensive shrimps due to lack on knowledge. Any more knowledge or advice that can be given to me is high encouraged, even if it seems simple. 
      Some specs of the tank, tanks does have a filter, that has small openings that could suck up baby shrimp. Its a small filter and has algae growth on the openings so it really does reduce the flow a bit, where i dont see it becoming a  huge issue. The tank is co2 injected, but thats pretty nailed down so nuking them with co2 is highly unlikely. The tank has a soil bottom capped with coarse sand. The vast majority of the bottom of the tank is carpeted with plants but they still have a way to go. There is no lid on the top of the tank. The tank does have some natural river stones in it with the brown algae growth on them. And a lot of the plants have the white "bugger" algae growing on them or around them. The tank receives about 10 hours of light a day. I know i put a lot of un-important information here, but maybe a pro will see a problem here and be able to inform me so I can correct it. Thanks for your time and consideration in advance!!!!
      Regards
      -The Keeper
    • TheKeeper
      By TheKeeper
      Ive done alot of research but let me explain my set up for you. I have a 6 gal tank that is approx 12 inch tall. It is a fertilized and currently has a DIY co2 on it, i did this by taking a 2 liter bottle and adding sugar and yeast, it is connected to a special co2 bubble (whatever they are called). The tank also has high lighting and is completely planted carpeted and bigger plants. Im about to be adding in my cherry shrimp and know that gassing them with co2 is possible at night. And im wanting to avoid this of course. Yet i dont want to spend alot of money upgrading my co2 system. The co2 bubblier is only 8-9 inchs from the water line. The majority of the bubbles reach the surface meaning not all the co2 is dissolving or there are other gasses present. Im wondering if I can get away with this co2 delivery system. Or what simple upgrades could be made so that it doesn't run at night? from what i understand it would be at night i would gas the shrimp? Also I do a 50% water change 1 if not 2 times a week. 
       
      Options ive thought of-
      1. Instead of a 2 liter bottle maybe like a 12 oz bottle, scale back the yeast and sugar so there is less co2 being produced
      2. Releasing the pressure in the DIY bubblier before bed. so it would take maybe 4-6 hour for the pressure to build up again and start bubbling 
      3. Upgrading system (Dont want to do this really, but i though of it)
    • Shrimp>Wife
      By Shrimp>Wife
      Hi Everyone,
      I was inspired to make the stainless steel immersion tubes found in the following thread: 
      https://skfaquatics.com/forum/topic/9455-cooling-multiple-tanks/
      I made mine with the following materials
      - x metres of annealed seamless stainless steel tube grade 316. Outer Diameter 12.7mm, Wall Thickness 0.9mm, ASTM 269. I got mine from Midway Metals in Sydney for $5 per metre.
      - A hand bender, rated to bend thin walled stainless steel. Got one from ebay for $99.
      - A tube cutter, again make sure it will cut thin wall stainless steel. I got mine from ebay for $32.
      For 60cm tanks I recommend 3 metres of tubing
      For 30cm tanks I recommend 2 metres of tubing
      Your hand bender will have an inherent bend radius, using this you can calculate the length of tube that you will use up with each bend whether it be 90 degrees or 180 degrees and pretty much how much tube you will need depending on your design. 
      NOTES: I used 12.7mm tubing as you can then squeeze 12/16mm aquarium hosing on to it snugly (if you are paranoid use hose clamps as well). I also used 12.7mm OD tubing as its the maximum diameter you can get a hand bender for that is rated to bend stainless steel. Do not get thicker than 1.0mm walled stainless steel it will be a nightmare to bend. Make sure your stainless steel is annealed seamless tube this is specifically made for severe manipulation. This is for freshwater application only... the guys at midway said this would last 3 months in a saltwater tank lol. Good hand benders are each made for one specific diameter only, make sure you get the right one for your tube diameter.
      I am happy to post links to the ebay items if I'm allowed to.
      I'm pairing this with an Eheim 2213 and a Resun cl 200 chiller to chill 2 x 60cm tanks and ultimately 3 x 60cm, I'll update once this is done and give some feedback on the temp differences. I hope the info is useful.
       
       
       
       
       
       
       
       

    • jessaweeshrimp
      By jessaweeshrimp
      I am setting up a new tank and currently have a 36" 12 gallon, a 30 gallon long, a 20 high, a 10 gallon and a 29 gallon. I am now setting up a 75 gallon. I am using a Submersible and a HOB and a UG with Power heads.
      My question revolves around running the Powerheads in reverse and feeding them with CO2 from a Citric/Baking soda set up. Will the CO2 hurt the plants being delivered to the roots first for maximum diffusion? I do use Seachem Excel in my tanks trying to give the plants the edge over the algae. 
      I have also used the H2O2 and CO2 punch technique successfully but haven't chatted too much about ferts and CO2. Does anyone see any concerns with my plan?
       
    • Zebra
      By Zebra
      This is the new and improved steriliser. 
      its basically just 40mm pvc pipe end cap with spacers made from 40mm pipe.
      2 wires connected to mesh close together in the water.
      Splits the H20 on a molecular level, pretty cool for how simple it is. 
      Normal copper wire will work but it will dissolve within a few minutes, ive just used stainless steel BBQ skewers, these also worked well to just hang the whole unit from the side of the tank, and the stainless steel mesh from a tea strainer.
      Then air line tubing to prevent the rods touching, and some heat shrink to hold it all together, 
      You just have to do tight connections like unless you have a SS welder, 
      ?
      I'm just using 12v DC so in theory I could easily add a fader to control the intensity of the steriliser just like the fancy ones.
      I might do an actually write up on it later or something. For now I'm getting this bad boy in my zeb tank.
      its working great, now how long should I have it on for? Haha
      I was thinking starting at 15min per hour. Lol yeah it's pretty damn ghetto.
      Cheers



  • Must Read SKF Articles

  • Register today, ask questions and share your shrimp and fish tank experiences with us!

    Join Our Community!

  • Posts

    • jayc
      It sounds about right for GH6 (6 drops is roughly 120 TDS). Those GH test kits are not the most accurate. And RO water reading of 3 is not unreasonable. I don't know why you would have been reading 240TDS last week and now it's a 100 points lower. I would suggest, not changing water parameter with a water change for a week, then see where it is at. Change if it gets close to 200 (say around 180-190). Let's give the tank some stability by not changing anything for a while.
    • supermansteve32
      I checked my TDS meter and it reads 3 on RO water and today my TDS in my tank is 133. I did a test with API and it took 6 drops so that's around 100 TDS.  I had 2 adolescents die overnight.  Should I only change water when it's over 200 TDS or should i continue with the 10% every week?  Thanks
    • supermansteve32
      I'll check it when I get off work tonight. I'll check my reader against pure RO water & tap, and do a GH test.  I'll also clean my TDS meter.  Thanks for your help everyone. 
    • beanbag
      If u have a GH test kit, then u can do a cross check, where each GH value in RO water made with SS equals about 20 ppm, e.g. GH 6 water will give you about 120 ppm.
    • sdlTBfanUK
      Are you sure the new reading is correct as that sounds unlikely, and I would have thought you would have had shrimps dying  with that sort of decrease. Do you have a second way of checking the TDS, or can you take a sample to a fish shop for them to test? I can't think of any reason that would happen or even heard of that before? Even if you had put pure RO water in last water change it wouldn't have dropped that far! If it is currently the TDS113 it will make adjusting easy as you just mix the water to the desired end TDS figure (140ish) and it will slowly go up to that. Simon
×