Competition to close out November - Design\DIY

[NoGi]

To accommodate for those that can design but not build and those that can build but not design, this comp will be open to both formats.

Criteria and steps to enter:

To enter this competition you will either need to submit a design for a DIY build or a DIY build itself. The scope is fairly open so as long as it can be related to the Aquatic hobby it is fine to enter. Steps to enter:

1. Create a new topic in the appropriate section on SKF Aquatics detailing the DIY project/design
2. Post a link to that topic here

Rules:

• Minimum post count - 5 to enter
• Can't be a design or DIY that has been published prior to October 2016
• Has to be your own work
• Has to be published here on SKF Aquatics

Limitations:

• For logistical reasons, this will be limited to our Australian members only

Sponsored by:

1st Prize:

Winner will be selected by SKF staff in consultation with our sponsor

Discretionary Prize(s):

Whatever comes out of the SKF Aquatics goodies box - these will be Shrimp Keepers Forum branded.

 

End Date: December 2nd, 2016

Edited November 22, 2016 by NoGi
A months grace for when DIY was posted

[daimen]

Hopefully this works
http://www.skfaquatics.com/forum/index.php?/topic/12644-Where-theres-shrimp-theres-endlers

Sent from my SM-T815Y using Tapatalk

[NoGi]

1 hour ago, daimen said:

Hopefully this works

It does but.....

1 hour ago, NoGi said:

Can't be a design or DIY that has been previously published

so needs to be a new project from today onwards.

[daimen]

Dang it.


Sent from my SM-T815Y using Tapatalk

[daimen]

This one
http://www.skfaquatics.com/forum/index.php?/topic/12666-Diy-Shrimp-saver/fry-saver

Sent from my SM-T815Y using Tapatalk

[Madmerv]

As I'm in the middle of a DIY ATM i need just a bit of clarity here. If i start a post in the correct section do i have to have the project finished by Dec 2 or do i need to finish the project and then put up the post?

My thoughts are that i'm going to need help/advice along the way here.

[NoGi]

If you know what you are building, put up the design by the due date and just keep updating the thread as you go and you'll be fine.

[inkevnito]

On 11/18/2016 at 7:27 AM, NoGi said:

 

Rules:

• Minimum post count - 5 to enter
• Can't be a design or DIY that has been previously published
• Has to be your own work
• Has to be published here on SKF Aquatics

 

Does this mean it cant be a design previously published just on SKF? or any other forum/website?

[NoGi]

3 minutes ago, inkevnito said:

Does this mean it cant be a design previously published just on SKF? or any other forum/website?

Can't have been published on SKF, will accept if it's recent (max a month old) and it's your original work and can show a full step by step topic.

[inkevnito]

2 minutes ago, NoGi said:

Can't have been published on SKF, will accept if it's recent (max a month old) and it's your original work and can show a full step by step topic.

Thanks :)

[Madmerv]

Ok as i'm getting along in this project, thanks to some competition incentive, here it is.

Cheers

[NoGi]

On 18/11/2016 at 9:07 AM, NoGi said:

so needs to be a new project from today onwards.

@daimen, I've given a months grace to the start date.

On 18/11/2016 at 7:27 AM, NoGi said:

Can't be a design or DIY that has been published prior to October 2016

 

[daimen]

I dont get it. What did i do wrong?

Sent from my SM-N920I using Tapatalk

[NoGi]

1 minute ago, daimen said:

 

I dont get it. What did i do wrong?

 

LOL nothing at all, I am saying that you can also submit the test tube DIY if you so wish.

[daimen]

Ok cool so they are both submitted then

Sent from my SM-N920I using Tapatalk

[Tangers]

What if you've already finished the design and it's up and running??

[NoGi]

6 minutes ago, Tangers said:

What if you've already finished the design and it's up and running??

If it was done October or sooner and you have a full work log topic here you are good to go.

[Tangers]

Just now, NoGi said:

If it was done October or sooner and you have a full work log topic here you are good to go.

Didn't do a log. Just ran with it!

[NoGi]

Just now, Tangers said:

Didn't do a log. Just ran with it!

Well here's an opportunity for you to write it down ?

[Tangers]

Just now, NoGi said:

Well here's an opportunity for you to write it down ?

I can do that. just wasn't sure if it was allowed

 

[Zebra]

Hey y'all. Can we enter more then one build? 

This is my current 4ft build still cleaning the lounge room of tools but she's finally finished :) 

I'm not great with links etc is that right? Haha

cheers

 

Edited November 26, 2016 by Zebra

[NoGi]

Enter as many times as you like ?

[Zebra]

Awesome, my logs aren't hugely detailed as the designs became evolving projects Haha I should probably better explain what I did in a post at the end.

But they have a good explanation on how to safely drill glass :) and they were started in late October, and just adding final touches like sump media positioning etc.

great site. 

 

So this is the other build I've been working on.

 

Edited November 26, 2016 by Zebra

[NoGi]

Ends on Friday folks

[NoGi]

OK Folks, comp is now closed for new entries. Judging will be commencing shortly.