Jump to content

New Library Article - Cheat Sheet for adjusting water parameters


jayc

Recommended Posts

Thanks, there is still a final clean up required but I'll get it done when I go through the branding exercise with all the posters.

Link to comment
Share on other sites

3 hours ago, Kaylenna said:

 

I love the chart, but I find the red circles a tad distracting. 

 

The increase/decrease circles?

Link to comment
Share on other sites

Yah those.  When I look at the page, that's the first thing I see and it seems to take my attention from the text.  I'm not sure if it's the color or just the solidness of them compared to text.

Link to comment
Share on other sites

Personally, I feel the text version in the first post is much easier to read, while the graphical representation is a little bit too busy.  I'm also reading the increase/decrease arrow balls opposite of what they actually represent.

Probably not something to put on the main chart in particular, but what about weird edge cases to supplement the cheat sheet?

 

For example I have very low ph, and very high gh out of the tap. (also bounces between 0-3 kh)

One could try to lower gh by adding RO water, but depending on the water chemistry going in, the RO water coming out might be rather acidic, which won't fix a low ph problem.

While trying to fix the low ph with bicarbonate will cause the gh to rise.

I'm experimenting with some different solutions, but it is one of those things that may end up having a few different answers depending on whether their water will come out of RO acidic or not among other things.

Link to comment
Share on other sites

The infographics is not to replace the table. Some people understand text better and others can understand a graphical representation better. We are having table and infographics so that we cater for all.

Link to comment
Share on other sites

  • 2 months later...

Looks great ?? @NoGi In line with the other posters, easy to read and use take a pat on the back well done.

  • Like 1
Link to comment
Share on other sites

If @jayc is happy ?, as he had this idea for the cheat sheet, I'd say your right to go @NoGi as stated before take a pat on the back because as usual you've done well again. Keep up the great work just don't burn yourself out.

Link to comment
Share on other sites

Thanks @zn30.

 

@NoGi,

I think the Ammonia/Nitrite column needs a "Do Nothing" heading for the Too Low row.

Just like the Nitrate column.

  • Like 1
Link to comment
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Join Our Community!

    Register today, ask questions and share your shrimp and fish tank experiences with us!

  • Must Read SKF Articles

  • Posts

    • beanbag
      Update to say that after a few gravel vacs, front wall scrub, moss / floating plant trim, that the condition seems to have improved.  My current theory is that it is due to waste / debris management, where "stuff" like that brown mulm accumulates in the substrate and behind the HMF filters.  Maybe some tanks can somehow deal with it, but mine can't.  Also another experienced shrimper suggested that maybe those "shell bugs" don't just live on the shrimps but also in this debris.  Maybe this is the reason some tanks fail due to "old tank syndrome" where all they need is a good gravel vac? Also, I am guessing that plant trim helps too because now more of the nutrients and light go into growing algae instead of more plants? Well anyway for this tank I will try weekly water change and monthly gravel vac / plant trim.  For my next tank, I'm thinking of something like an under-gravel system where this mulm can fall down and I vac it out.
    • sdlTBfanUK
      Good to have an update and good to hear you are getting shrimplets, so hopefully your colony will continue and you may not get to the point where you have to cull some to stop over population. These type of shrimp only live 12 - 18 months so the adult deaths may be natural? If you have the time I would do weekly 25% water changes, adding the new water via a drip system and do some vacuuming clean of the substrate each week, even if only a different bit each week! See if that helps in a few months and if it does then stick with that regime? It should help reduce any build-ups that may be occuring!
    • beanbag
      Hello again, much belated update: The tank still has "cycles" of 1-2 month "good streaks" where everybody seems to be doing well, and then a bad streak where the short antenna problem shows up again, and a shrimp dies once every few days.  I am not sure what causes things to go bad, but usually over the course of a few days I will start to see more shrimp quietly standing on the HMF filter, and so I know something is wrong.  Since I am not "doing anything" besides the regular 1-2 week water changes, I just assume that something bad is building up.  Here's a list of things that I've tried that are supposed to be "can't hurt" but didn't prevent the problem either: Dose every other day with Shrimp Fit (very small dose, and the shrimp seem to like it) Sotching Oxydator Seachem Purigen to keep the nitrates lower Keeping the pH below 5.5 with peat Things that I don't do often, so could possibly "reset" the tank back to a good streak, are gravel vac and plant trim, so maybe time to try those again. One other problem I used to have was that sometimes a shrimp would suddenly stop eating with a full or partially full digestive tract that doesn't clear out, and then the shrimp will die within a few days.  I suspected it was one of the foods in my rotation - Shrimp Nature Infection, which contains a bunch of herbal plant things.  I've had this in my food rotation for a few years now and generally didn't seem to cause problems, but I removed it from the rotation anyway.  I don't have a lot of adult Golden Bees at this point so I can't really tell if it worked or not. Overall the tank is not too bad - during the good streaks occasionally a shrimp will get berried and hatch babies with a 33-50% survival rate.  So while there are fewer adults now, there are also a bunch of babies roaming around.  I guess this tank will stagger on, but I really do need to take the time to start up a new tank.  (or figure out the problem)
    • jayc
      If that is the offspring, then the parents are unlikely to be PRL. I tend to agree with you. There are very few PRLs in Australia. And any that claim to be needs to show proof. PRL genes have to start as PRL. CRS that breed true after x generations doesn't turn it into a PRL. Neither can a Taiwan bee shrimp turn into a PRL despite how ever many generations. I've never seen a PRL with that sort of red colour. I have on Red Wines and Red Shadows - Taiwan bee shrimps. So somewhere down the line one of your shrimp might have been mixed with Taiwan bees and is no longer PRL. It just tanks one shrimp to mess up the genes of a whole colony. 
    • sdlTBfanUK
      Sorry, missed this one somehow! The PRL look fantastic and the odd ones look part PRL and part Red wine/Red shadow in the colour. They are still very beautiful but ideally should be seperated to help keep the PRL clean if you can do that.  Nice clear photos!
×
×
  • Create New...