Jump to content
Sign in to follow this  
Mitch91

Getting supplies today for tank

Recommended Posts

jayc

The ole yogurt tub acclimatiser. 

Add more moss in there for them.

An turn the aquarium lights off. That will help their stress levels.

Share this post


Link to post
Share on other sites
NoGi

Exciting times, keep those pictures coming.

Share this post


Link to post
Share on other sites
Mitch91

image.jpeg

As u can see I added them in with my mishings only a temp thing as they are still juvies just sorting out one of my already established tanks tds then they will move on in to that.

they still seem dark in colour hopefully will colour up in a day or 2 

image.jpeg

I started with 12 now have over 25 with 3 females berried :) 

image.jpeg

  • Like 1

Share this post


Link to post
Share on other sites
Jarad

Very nice mitch :)

 

Share this post


Link to post
Share on other sites
Mitch91

I started with 12 now have over 25 with 3 females berried :) 

image.jpeg

  • Like 1

Share this post


Link to post
Share on other sites
NoGi

That was quick. Looking good.

Share this post


Link to post
Share on other sites
zn30

They do look great and obviously loving the conditions you have provided @Mitch91 well done.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  



  • Join Our Community!

    Register today, ask questions and share your shrimp and fish tank experiences with us!

  • Posts

    • kms
      Mine is a DIY Chiller, as you know a peltier has a hot side and cold side, for the cold side to stay cold, the hot side must be kept cold and with a heatsink and fan to cool it down. My DIY chiller has two sides and two water block. blue aluminum block with tube leading to the outlet of the canister filter and back to the tank to chill the tank water. copper block is to cool the hot side of the peltier, with copper block to the radiator/fan and a water pump looping. The problem is the tube from the water pump came off, apparently the plastic from the pump started to melt and the tube came off and the looping side had no water, so the copper water block stayed hot all the time with heat transferred to the cold side of the peltier also heating the water. since the copper takes time to cool down, most of the heat and the room hot temp had already heat the tank water to about 45 C.
    • sdlTBfanUK
      Try testing it again and see what you get or to confirm that the previous were right, especially the higher Ph reading is all I can recommend! If there is some explanation for the difference hopefully someone will reply and let you know, but I expect there won't actually be a difference if you do it again? Simon
    • jayc
      No that's not normal. But I don't know which tube in your loop had come off. Can you show us?   Yes that would have helped a bit, and at least give KMS more time to have found the issue by turning off the chiller. As I understand, kms has a peltier style chiller, and a tube of the pump had come off, which meant that hot water from the hot side of the peltier flowed back into the tank. So if the chiller was on the same temp controller, it would have turned off the chiller at around 26degC. The tank might have got warmer in his room, but it would have been at a much slower rate, and certainly would not have reached 45degC.
    • kvinnyy
      I'm using the API master test kit with the dropper bottles. I was just very confused at how much more akaline the water was coming out of the filter compared to the water out in the open. I can't imagine how this fluctuating change in pH is going to be beneficial for my crs.
    • sdlTBfanUK
      What type of test are you doing strip or drip? I use drip tests and always ignore the first attempt as no matter how well I clean and keep the test set it is often way out of line. Las time first test was Ph8, second test Ph6. Sometimes first attempt looks ok so I have no idea what is going on????? If you just tried once it may be worth testing again? Simon
×
×
  • Create New...