Jump to content
Foxpuppet

Death Flick? Or sting - K14

Recommended Posts

Foxpuppet

I was just blissfully watching my shrimp after feeding and noticed my only k14 CBS shrimplet flick rapidly around in the water amongst some moss and subwassertang near the glass and substrate, then slowly drift upside down to the bottom.

I've searched for hydra, planaria etc. I couldn't see anything Apparent. I've had no issues in that tank for some time.

I netted him up and shot a video. Can't really see anything on him.

Thoughts?

https://vimeo.com/167495695

https://vimeo.com/167496814

edeb817d56dd7867e169b80af3fbdd0b.jpg

32fdb2b269ac521a1c66e1ed4e41e13e.jpg

Sent from my iPhone using Tapatalk

Share this post


Link to post
Share on other sites
al4n

rip

Share this post


Link to post
Share on other sites
Foxpuppet

rip

Nah he's not actually dead... Yet. I've got him hanging out in a net.

I've treated the tank with planaria zero

490495ef9db15559171b883574e24730.jpg

I hadn't actually opened it. The old no planaria had a much bigger spoon, and when you treated the water in the tank all went milky.

With planaria zero the spoon is minuscule. Dosed 6 spoons into a cup of tank water, mixed it up and poured in. Water barely went cloudy at all. 30 minutes later you wouldn't know I've done it.

Any way he is still holding on for now and looks quite happy.... LOL couldn't resist ;)

ba5a649eab602c671d4b7e7fec6a297e.jpg

  • Like 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Must Read SKF Articles

  • Register today, ask questions and share your shrimp and fish tank experiences with us!

    Join Our Community!

  • Posts

    • jayc
      It must have been an aluminium heatsink. The Indium in Liquid metal will eat through aluminium. Only copper or nickel plated heatsinks can be used with liquid metal. It says so on the packet, at least my pack of Thermal Grizzly Conductonaut does.
    • jayc
    • kms
      I will try to add all the old tank's shrimps at the end of August to the new tank, had a problem with my chiller this morning, try to make it more efficient by adding a better heat sink grease, I added a liquid metal grease, apparently you can't add liquid metal, when heating up, the heat sink turning to dust, along with part of the cooler inlet and outlet. So far the shrimps are ok.    
    • sdlTBfanUK
      I have had the new shrimps a week and have ordered some new ones(10) for delivery friday. There are probably at least 6 of the 8 alive (they may even all be alive still) but as the tank is so densely planted it is difficult to tell, but I saw 2 black and 2 red this morning, as yesterday, but I'm sure 1 red and  1 black weren't the same as the ones I saw yesterday so there are probably at least 6, if that makes any sense??? Anyway that will be it for now and I will just let the tank and shrimps do there thing once this batch are in there in a couple of days, and I can get back to the usual routine as was, before this unfortunate event wiped out the last lot. All parameters are good, including the nitrates now, but there are a lot of brown patches on the plants and moss balls still......... It all looks a bit drab and uninspiring and brown!!! I probably just need to be a bit more patient? I will do some maintenance tomorrow and a small 2L water change, then the new shrimps will go in on friday after acclimatising. The shrimps were totally uninterested in the spinach or shrimp lolly I put in at the weekend but I am assuming they have so much biofilm at this stage that that is keeping them busy and well fed and they are staying under cover until they get used to their new environment and this strange ugly monster that keeps peering in at them through the glass from time to time? I guess if some 100ft tall bloke kept peering through my window a few times a day I would be a bit nervous/reserved shall we say? I removed the spinach and the shrimp lolly and put the shrimp lolly in the betta tank and within minutes there were 10 shrimp on it so there was definitely nothing wrong with that shrimp lolly! Simon
    • jayc
      Traps don't work on hydra. Even with planaria, it is slow and it doesn't catch them all.
×